Is the Wrangler a unibody vehicle?

What are the layout forms of the drivetrain?

The layout forms of the drivetrain include: front-engine front-wheel drive, front-engine rear-wheel drive, mid-engine rear-wheel drive, rear-engine rear-wheel drive, and all-wheel drive. The drivetrain is composed of the clutch, transmission, universal joint drive assembly, and drive axle. The functions of the drivetrain are: 1. to reduce speed and increase torque; 2. to vary speed and torque; 3. to enable reverse driving; 4. to interrupt the power transmission of the drivetrain. The maintenance methods for the drivetrain are: 1. regularly check the quality and level of the transmission oil to prevent oil leakage; 2. promptly replace or add engine oil; 3. replace damaged dust boots; 4. replace and check loose universal joints.

15

3

Share

How many kilowatt-hours of electricity does it take to fully charge the Yuan EV?

It takes 45 to 50 kilowatt-hours to fully charge the Yuan EV. The Yuan EV has a battery capacity of 42kWh, and there will be some energy loss during the charging process. It is recommended to charge the Yuan EV when the battery level drops to the warning red mark. Charging can be done through household single-phase AC charging, wall-mounted single-phase AC charging box, or single-phase AC charging pile. Taking the 2019 Zhi Lian Ling Dong model Yuan EV as an example, its body dimensions are: 4360mm in length, 1785mm in width, and 1680mm in height, with a wheelbase of 2535mm. The front suspension of the 2019 Zhi Lian Ling Dong model Yuan EV is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

6

4

Share

What is the method for removing the rear seat of a Santana?

The method for removing the rear seat of a Santana is: 1. Remove the clips on both sides of the rear seat; 2. Pull the seat outward to separate the hooks at the bottom of the seat from the car chassis; 3. Lift the seat upward to complete the removal. Taking the 2021 manual base model Santana as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8 liters, and trunk capacity 466 liters. The 2021 manual base model Santana features a MacPherson strut front suspension and a compound torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 112ps, maximum power of 82kW, and maximum torque of 145Nm.

1

2

Share

Is Leopaard a Joint Venture or Domestic Car?

Leopaard is a domestic car brand, with its model lineup including the Leopaard Q6, Leopaard Heijingang, Leopaard Feiteng, Leopaard Feiteng C5, and Leopaard CS10. Taking the 2019 Leopaard CS10 Automatic Luxury Edition as an example, its body dimensions are 4663mm in length, 1875mm in width, and 1700mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 60 liters. The 2019 Leopaard CS10 Automatic Luxury Edition features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 177 PS, a maximum power of 130 kW, and a maximum torque of 250 Nm.

12

1

Share

How to Deal with Scratches on the Car?

Here are the methods to deal with scratches on the car: 1. Use scratch repair wax, polish the scratched area with a waxing sponge, then apply gloss restoration wax or polishing wax; 2. Apply toothpaste evenly on a cloth and wipe the scratched area; 3. Use water sandpaper dipped in water to remove rust spots, then apply touch-up paint for coloring; 4. Clean the scratched area, polish it, and then spray paint; 5. Pour chilled cola on a cloth and wipe the area; 6. Use essential balm for repair; 7. Apply scratch removal wax; 8. Clean the scratched area thoroughly, apply nail polish, and let it dry.

4

5

Share

What are the layout forms of automotive transmission systems?

The layout forms of transmission systems include: front-engine front-wheel drive, front-engine rear-wheel drive, mid-engine rear-wheel drive, rear-engine rear-wheel drive, and all-wheel drive. The transmission system is composed of a clutch, gearbox, universal transmission device, and drive axle. The functions of the transmission system are: 1. to reduce speed and increase torque; 2. to change speed and torque; 3. to achieve reverse driving; 4. to interrupt the power transmission of the transmission system. The working principle of the automotive transmission system is that the power generated by the automobile engine is transmitted to the driving wheels through the transmission system, which has the functions of speed reduction, speed change, reverse driving, power interruption, inter-wheel differential, and inter-axle differential. Working in conjunction with the engine, it ensures the normal operation of the automobile under various working conditions, providing good power performance and fuel economy.

8

4

Share

Is the Wrangler a unibody vehicle?

What are the layout forms of the drivetrain?

How many kilowatt-hours of electricity does it take to fully charge the Yuan EV?

What is the method for removing the rear seat of a Santana?

Is Leopaard a Joint Venture or Domestic Car?

How to Deal with Scratches on the Car?

What are the layout forms of automotive transmission systems?

What is the range of the Model X?

What are the reasons for the sudden engine stall while driving?

What Causes Steering Wheel Vibration During Car Idling?

Where is the VIN located on the Chery E3?