Is the winter fuel consumption of 15L for the 8th-generation Accord high?

1 Answers
GavinFitz
07/29/25 10:42pm
The winter fuel consumption of 15L for the 8th-generation Accord being high or not depends on multiple factors such as actual comprehensive fuel consumption, load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on real driving conditions. Factors determining fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. Relatively speaking, the size of a car's displacement does not directly correlate proportionally with fuel consumption. In addition to displacement, factors such as the car's shape, weight, and engine technology also significantly influence fuel consumption. Solutions for high fuel consumption: Correct improper driving habits, maintain steady acceleration, avoid coasting in neutral, reduce vehicle load, perform regular maintenance and inspections, and address any issues promptly.
Was this review help?
10
3
Share
More Forum Discussions

How to Obtain a Motorcycle License?

When registering, prepare the original valid ID card, one copy of both sides, and four one-inch bareheaded photos. Go to the motorcycle license window of the city traffic bureau to fill out the motorcycle license application form and pay the fee, then go to the medical center for a physical examination. Finally, submit the application form, medical examination report, photos, original ID card, and copies in a bag, and wait for the test.
16
1
Share

Where is the tire pressure sensor located?

Tire pressure monitoring sensors are installed on the tires, usually at the valve stem position. The tire pressure monitoring display is typically placed on the center console. The central area of the center console houses many electronic devices, which may cause some interference with radio frequencies, especially from devices like electronic eyes. Tire pressure warning light: The tire pressure monitoring indicator is a yellow symbol featuring an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. When the tire pressure monitoring light illuminates, it indicates abnormal tire pressure. Abnormal tire pressure generally occurs due to the following three reasons: Abnormal tire pressure: The system typically triggers an alarm when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system continues to record the previous data, causing the tire pressure monitoring light to stay on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.
14
0
Share

How to Add Refrigerant to a Car Air Conditioner?

Connect the refrigerant gauge to the air conditioning system (both high and low-pressure pipes), then proceed to evacuate the system, selecting low-pressure evacuation. Generally, there's no need to monitor the negative pressure value during evacuation. Evacuate for 3 minutes, then tighten the low-pressure gauge switch. After that, you can connect the refrigerant canister to begin the refill process.
7
1
Share

How to Change the Transmission Oil for Audi A3?

This method is a root cleaning approach, which can also clean the oil filter. Removing the oil pan is a major task, and the corresponding labor cost will increase accordingly. Loosen the bottom nut of the transmission oil pan to allow the old transmission oil to drain naturally by gravity.
4
1
Share

How to Turn on the Air Conditioning in a Lavida?

To operate the air conditioning in a Lavida, press the AC button and turn the temperature knob to the blue section. The AC button is the air conditioning switch, MAX stands for maximum, and the internal circulation can be manually turned on or off. By default, when the air conditioning is turned on to its maximum setting (or when there is a significant temperature difference between the inside and outside of the car), the internal circulation will automatically activate.
20
5
Share

How to Clear the Immediate Maintenance Reminder in Octavia?

Turn off the ignition switch, then press and hold the "0.0/SET" (reset/setting) button on the instrument panel. Turn on the ignition switch while keeping the "0.0/SET" (reset/setting) button pressed with your left hand. When the reset-related information appears on the instrument panel display, press the "0.0/SET" (reset/setting) button again to confirm.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.