Is the white showing through on a black car the primer?

1 Answers
OIris
07/30/25 6:19am
Black car showing white is the primer, because the primer color is different from the surface paint color. In addition, there are the following methods to determine if the car paint has exposed the primer: Scratch depth: The primer usually refers to the electrophoretic layer and intermediate coat at the bottom of the paint. If the scratch reaches these two layers, it indicates the scratch is very deep. Color observation: The primer color is different from the body paint color. If a different color is visible in the scratch, it definitely means the primer is damaged. Unrepairable scratches: Some car owners may try to repair scratches by washing, waxing, or polishing, which can be effective. However, if the scratches still cannot be repaired, it indicates the primer has been scratched.
Was this review help?
9
0
Share
More Forum Discussions

Which holidays offer free highway tolls?

Highway toll-free holidays include the Spring Festival, Qingming Festival, Labor Day, and National Day. The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday. If you enter the highway during non-free hours but exit during free hours, you will not be charged toll fees; if you enter during free hours but exit during non-free hours, you will not be eligible for the toll-free benefit. Legal basis: "Notice of the State Council on Approving the Implementation Plan of the Ministry of Transport and Other Departments on Exempting Toll Fees for Small Passenger Vehicles During Major Holidays"—The toll-free period covers four national statutory holidays: Spring Festival, Qingming Festival, Labor Day, and National Day, as well as the above-mentioned statutory holidays determined by documents issued by the General Office of the State Council in that year. Day after day. The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday (based on the time when the vehicle passes through the toll lane of the ordinary highway toll station and the time when the vehicle exits the toll lane of the highway). The free vehicles include passenger vehicles with seven seats or fewer (including seven seats) on toll roads, as well as motorcycles allowed to travel on ordinary toll roads.
11
4
Share

Where is the computer connector located on the Geely Vision X6?

The computer connector of the Geely Vision X6 is located under the dashboard on the passenger side. The main configurations are as follows: 1. Stylish and dynamic appearance: The front face of the vehicle adopts the consistent family design language. The 'Space Echo' style grille is adorned with the Geely logo featuring three-color gemstones, elevating the brand's recognition. The eagle-eye headlights come with features like directional rotation and automatic activation, which are both practical and high-end. The only drawback is the 'inverted hammer' shaped taillights, which appear somewhat peculiar and have been a point of criticism among many owners. 2. Excellent interior and abundant features: Opening the door reveals the truly outstanding interior of the Vision X6. The soft-touch dashboard made of molded plastic and the extensive use of soft materials exude a sense of luxury. The design of the phone holder and cup holder with 'Hui' patterns is full of rich Chinese elements, creating a pleasant atmosphere. The vehicle is equipped with super practical features such as a 9-inch large central control screen, a 6-speaker sound system, a rearview camera, and a dashcam. Additionally, the active safety features are also quite luxurious.
16
3
Share

Is it not allowed to stop during reverse parking?

Reverse parking does not allow stopping midway. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small vehicles C1 and C2 include five mandatory tests: reverse parking, parallel parking, hill start and stop, right-angle turn, and curve driving (commonly known as S-curve). Below are introductions to other test subjects: Subject 1: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test format is computer-based. Subject 3: Includes the road driving skills test and the safe and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's test. The content of the road driving skills test varies depending on the type of vehicle being tested. Subject 4: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license assessment. Subject 3 test is divided into two parts: besides the road test, it also includes the safe and civilized driving knowledge test, commonly known as 'Subject 4,' which evaluates 'driving ethics.' The test paper consists of 50 questions, mainly in the form of cases, pictures, animations, etc., with a full score of 100 and a passing score of 90.
14
5
Share

What kind of driver's license is required to drive an 11-seater Jinbei?

To drive an 11-seater Jinbei, a B1 driver's license is required. A1 and A2 driver's licenses are also acceptable. Below are the relevant details: 1. Detail one: Type B driver's licenses include B1 and B2, corresponding to medium-sized buses and large trucks respectively. 2. Detail two: If a Type B driver's license holder has demerit points recorded, they must report to the traffic management department of the public security authority within thirty days after the end of the current scoring cycle for verification. During verification, they must participate in no less than three hours of study on road traffic safety laws and regulations, safe and civilized driving, emergency handling, and other related knowledge, and receive case-based education on traffic accident warnings.
15
5
Share

What Causes the Yellow Engine Warning Light to Illuminate?

The illumination of the yellow engine warning light signifies a warning, indicating that certain system parameters in the vehicle may have exceeded the set range. The vehicle can still be driven at this time, but some functions may be limited. There is also a red engine warning light. When the red warning light comes on, it means the vehicle must stop immediately, turn off the engine, and driving is prohibited until the fault is checked. There are mainly seven reasons for the engine warning light to illuminate: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake temperature, oxygen, etc. When these sensors are damaged, have poor contact, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or oil quality issues: Failure to add fuel and engine oil as required by the manufacturer may cause engine wear, leading to the warning light illuminating. Poor mixture combustion: Poor combustion can lead to engine carbon deposits or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor mixture combustion. Turbocharger issues: Problems with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system is compromised, it may lead to clogged engine pipes, and in severe cases, the engine warning light will illuminate. A dirty air filter that hasn't been cleaned regularly can cause intake issues. Exhaust problems: Exhaust system faults can also trigger the engine warning light. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, and bearings, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead- or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily cause catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, simultaneously triggering the engine warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for signs of shaking, smoke, etc. If present, avoid restarting the engine. Note: Under no circumstances should the engine be restarted if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check upon powering up. After 5-10 seconds, observe whether the warning light on the dashboard turns off. If the warning light remains on, visit a service center as soon as possible to diagnose the issue. The service center can use a portable diagnostic tool to read the fault codes, identify the problem, and perform targeted repairs.
11
2
Share

What Causes a Car to Surge?

Car surging is most likely caused by issues with the engine's vacuum tube or idle speed motor. Below are some relevant introductions regarding car engine maintenance: 1. Maintain good crankcase ventilation: Pollutants in the air can deposit around the PCV valve, potentially causing it to clog. If the PCV valve is blocked, contaminated gases can flow backward into the air filter, polluting the filter element and reducing its filtering capacity. Inhaling excessively dirty air-fuel mixture further pollutes the crankcase, leading to increased fuel consumption, accelerated engine wear, and even engine damage. Therefore, it is necessary to regularly maintain the PCV and clean the pollutants around the PCV valve. 2. Regularly change the engine oil and oil filter: As the oil passes through the fine pores of the oil filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged, the oil cannot flow smoothly through the filter element, which may cause the filter element to burst or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas. This accelerates engine wear and increases internal contamination.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.