Is the white color of the Boyue pearl white?

2 Answers
DiCarter
08/28/25 8:00am
The white color of the Geely Boyue belongs to Han Yu White. Classification of white colors: The white colors of cars are mainly divided into pearl white, polar white, and candy white. In fact, due to the different types of pigments used to create the color and the different proportions of ingredients, the degree of whiteness and the luster reflected to the human eye also vary. Professionals engaged in dyes or pigments can discern subtle differences with the naked eye. Composition of different white colors: Pearl white generally contains fluorescent brightener components, with a surface that reflects a pearl-like luster, emitting a blue or flesh-red light; candy white is a matte finish, a milky white with a faint yellow light, while polar white is a snow-white with a blue light, with a higher reflectivity than both pearl white and candy white.
Was this review help?
13
2
Share
HopeLee
09/10/25 6:08am
When I bought the Borui, I specifically asked the salesperson about the white paint. Geely officially calls it 'Crystal White,' but when you see the car in person, it's quite noticeable – the paint has fine glitter particles that give off a subtle pearl-like sheen under sunlight, completely different from ordinary solid white paint. This kind of pearlescent white is quite trendy now, even Japanese car brands love using it. But I should warn you – if you ever need touch-ups, pearl white is harder to color-match and prone to visible discrepancies, so it's best handled at an authorized 4S shop. Also, this paint finish is relatively dirt-resistant; after snow in northern areas, mud splashes on the body aren't as noticeable, making daily maintenance genuinely more hassle-free.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

Are Three-Cylinder Engines Fuel-Efficient?

Three-cylinder engines are fuel-efficient. With reduced pumping losses, a three-cylinder engine theoretically has less resistance due to one fewer cylinder, resulting in lower mechanical friction losses compared to a four-cylinder engine. This leads to slightly lower fuel consumption. Advantages of three-cylinder engines: There are two main benefits. First, they generally have lower fuel consumption—fewer cylinders naturally mean smaller displacement, which contributes to reduced fuel usage. The second advantage is their compact size and lighter weight. The smaller size allows for optimized engine bay layout and even cockpit arrangement, offering more flexibility in placement compared to four-cylinder engines. Disadvantages of three-cylinder engines: Due to inherent design limitations, three-cylinder engines suffer from idle vibration issues when compared to four-cylinder engines. This drawback has deterred many potential buyers, as models like the Buick Excelle and BMW 1 Series cannot avoid this vibration. Noise is another common issue with three-cylinder engines. Manufacturers attempt to mitigate it by adding sound insulation in the engine bay and using higher-quality materials in the cabin, but exterior noise remains noticeably louder.
14
0
Share

What does 'remaining processable 11 points' mean?

'Remaining processable 11 points' indicates that there are currently no points deducted. Driver's license points: The total points on a driver's license are 12, but only 11 points can be processed. If all 12 points are deducted, the driver will need to retake the first subject of the driving test. If a motor vehicle driver fails to use the vehicle lights as required during driving, 1 point will be deducted for each violation. Cases where 12 points are deducted: Reversing or driving in the wrong direction on a highway will result in an immediate deduction of 12 points; removing the license plate to obstruct law enforcement or evade punishment will also lead to an immediate deduction of 12 points. Additionally, if the license plate is lost, a temporary license plate must be obtained before driving, otherwise, 12 points will be deducted; driving under the influence of alcohol will result in a deduction of 12 points.
16
5
Share

What type of transmission is primarily used in automotive gearboxes?

Automotive gearboxes primarily utilize shafts and gears to transmit power. Below are the relevant details: 1. Automotive Gearbox: It is a set of speed-changing devices used to coordinate the engine's rotational speed with the actual driving speed of the wheels, aiming to achieve optimal engine performance. The gearbox can create different gear ratios between the engine and the wheels during vehicle operation. By shifting gears, the engine can operate under its best power performance conditions. The development trend of gearboxes is increasing complexity and higher automation levels, with automatic transmissions becoming the future mainstream. 2. Functions: Changing the transmission ratio to expand the range of torque and speed variations of the driving wheels, adapting to frequently changing driving conditions while keeping the engine operating under favorable conditions (higher power and lower fuel consumption); enabling the vehicle to reverse while maintaining the same engine rotation direction; utilizing neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitating gear shifting or power output in the gearbox.
14
5
Share

What Are the Causes of Insufficient Fuel Pressure in a Car?

The causes of insufficient fuel pressure in a car are: 1. Wear of the oil seal at the rear end of the fuel pump drive gear shaft or loose pipeline connections, leading to air in the pipeline; 2. Low fuel level in the tank or excessively dirty filter; 3. Wear or jamming of the fuel pump gear end face bearing, resulting in excessive clearance of the fuel pump gear shaft. The method to test fuel pressure is: 1. Turn on the ignition switch without starting the vehicle; 2. Remove the fuel pump relay and use a dedicated jumper wire to connect the fuel pump circuit; 3. After starting the vehicle, connect a fuel pressure gauge to check the fuel pressure value of the engine. The working principle of fuel pressure regulation is: The oil pressure is coordinated by the spring and the vacuum degree of the air chamber. When the oil pressure exceeds the standard value, high-pressure fuel will push the diaphragm upward, opening the ball valve, and excess fuel will flow back to the tank through the return pipe. When the pressure is below the standard value, the spring will press the diaphragm downward to close the ball valve, stopping the return of fuel.
8
2
Share

Is the Bora's engine made of iron or aluminum?

New Bora is equipped with the EA111 engine, which features a cast iron engine block and an aluminum alloy cylinder head. Definition of automobile engine: An automobile engine is the device that provides power for a car, serving as the heart of the vehicle. It determines the car's power, fuel efficiency, stability, and environmental performance. Depending on the power source, automobile engines can be categorized into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid systems, among others. Differences between automobile engines: Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, converting the chemical energy of fuel into the mechanical energy of piston movement to deliver power. Gasoline engines have higher rotational speeds, lighter weight, lower noise levels, easier starting, and lower manufacturing costs. Diesel engines, on the other hand, have higher compression ratios, greater thermal efficiency, and better fuel economy and emission performance compared to gasoline engines.
12
3
Share

Is a tire pressure of 280 too high in summer?

The value is somewhat high. For family cars in summer, the recommended tire pressure is between 230 and 260. Using 280 is not advised for two reasons: firstly, it affects the ride comfort of the vehicle, and secondly, it significantly increases the risk of tire blowouts during high-speed driving. Below is additional information: 1. Effects of high tire pressure: It can affect the vehicle's braking distance, reduce the tire's grip on the road, shorten the tire's lifespan, accelerate tread wear and aging, impair normal driving, increase fuel consumption, and in severe cases, lead to tire blowouts. Excessive tire pressure causes tire deformation, reduces overall elasticity, and increases load. 2. How to check tire pressure: Vehicles equipped with tire pressure monitoring systems can display the pressure on the dashboard or central console. Alternatively, visit a tire repair shop to use professional equipment for inspection. If the pressure is too low, it needs to be replenished; if it's too high, it should be reduced.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.