Is the wheel turned too early or too late when the corner is pressed during reverse parking?

What Causes the Steering Wheel to Feel Heavier?

There are several reasons why a car's steering wheel may feel heavier: 1. Insufficient power steering fluid. Power steering fluid is a medium oil used in the car's power steering pump to transmit steering force and provide cushioning. It needs to be replaced regularly, and any leaks should be checked. When the power steering fluid is insufficient, the steering wheel may feel heavy and stiff. 2. Low tire pressure. Low tire pressure increases the contact area between the tires and the road surface, leading to greater friction and making steering more difficult, resulting in a heavy steering wheel, which is not conducive to driving safety. 3. Toe-in issues. Toe-in can also affect the car's steering. Toe-in helps the steering wheels automatically return to the correct position, ensuring stable straight-line driving. Problems in this area can also cause the steering wheel to feel heavy. 4. Malfunction of the steering gear or power steering pump. The steering gear and power steering pump are also critical components affecting the car's steering. Any malfunction in these parts can make steering difficult. Issues such as universal joints, chassis suspension stabilizer bars, or plain bearings should not be overlooked. 5. Overly tight bearing fit. If the rolling bearings or sliding bearings in the steering system are too tightly fitted, it can lead to poor lubrication and cause sticking or resistance.

12

3

Share

What Causes the ABS Yellow Light to Illuminate?

There are multiple states of the ABS warning light, each with different causes and solutions: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect wheel speed signals. This prevents the ABS control module from determining vehicle speed or wheel slip rate, thus failing to issue appropriate braking commands. Solution: Clean the wheel speed sensor and adjust the gap between the sensor and the tone ring. Cause 2: Loose wiring connections or poor contact in ABS relays causing signal issues. Solution: Inspect and reconnect any loose wiring connections. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: Battery voltage drops below 10.5V when multiple electrical components are in use. The light extinguishes when engine RPM increases and voltage rises. Possible low voltage supply to ABS system due to poor connections. Solution: Check battery specific gravity, charging system, and power supply connections (voltage relay or power contacts). State 3: ABS warning light stays on after engine start until engine is turned off. Cause: Poor ground connection at ABS hydraulic valve body; faulty wiring connections; ABS control module failure. Solution: Loosen and retighten hydraulic valve body ground screw (clean contact surface if necessary); check connector gaps; replace ABS or ABS/ASR control module. State 4: ABS warning light illuminates during high-speed driving. Cause: ABS control module detects significant speed difference between front and rear wheels; incorrect tire or wheel specifications. Solution: Verify correct tire and wheel specifications (refer to fuel filler door sticker). State 5: ABS warning light flashes intermittently. Cause: Improper brake light switch adjustment; internal contact issues in brake lights. Solution: With engine running, depress brake pedal and manually push brake switch linkage downward to reset position; replace brake light switch if needed. When the ABS warning light is on, continued driving is not recommended. ABS malfunction means loss of anti-lock braking function - locked wheels during emergency braking may cause skidding and loss of vehicle control, creating significant safety hazards.

6

5

Share

Can a Temporary ID Card Be Used for Subject 2 Driving Test?

A temporary ID card can be used for the Subject 2 driving test. However, if you do not have a regular ID card and need to use a temporary one, you must inform the driving instructor in advance and follow the driving school's arrangements for the test. According to Article 19, Paragraph 1 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," "First-time applicants for a motor vehicle driving license shall fill out an application form and submit their identity proof." Therefore, you can take the Subject 2 test with a temporary ID card. One important note: The validity period of a temporary resident ID card is three months. You can take the Subject 2 test within this validity period. If the card expires, you will not be allowed to enter the test site. Thus, it is essential to take the test before the temporary ID expires. If the temporary ID expires due to special circumstances, you should promptly apply for a formal ID card or a new temporary ID. Subject 2, also known as the small road test, is part of the motor vehicle driving license assessment. It refers to the field driving skills test. For small vehicles (C1/C2), the test includes five mandatory items: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as the S-curve). Some regions may also include a sixth item: high-speed toll collection. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), as of June 1, 2021, the Subject 2 test for C2 and C5 no longer includes stopping and starting on a slope. For large vehicles (AB licenses), the Subject 2 test covers 16 items: reverse parking, passing continuous obstacles, curve driving, highway simulation test, width-restricted gate, bumpy road, single-plank bridge, narrow road U-turn, stopping and starting on a slope, parallel parking, highway emergency handling, mountain road simulation, right-angle turns, rain and fog weather simulation, highway tire blowout, and tunnel simulation driving.

6

1

Share

What's the reason for a car navigation screen going black with sound?

Here are the specific reasons and solutions for a car navigation screen going black with sound: 1. Check if the power supply to the display screen is normal. If the power supply is abnormal, replace the power supply module. 2. Check if the cable connection is good. If there is poor contact in the wiring, promptly inspect whether there is a loose connection causing the central control screen to go black, and securely reconnect the loose parts. 3. Check if the display screen is damaged by replacing it for testing. If it returns to normal, the display screen is damaged. If the power supply is normal and the cable connection is good, check the video output signal of the motherboard and test by replacing the motherboard.

3

5

Share

Is it normal for the Porsche Cayenne to have a successful Bluetooth connection but unable to play music?

It is not normal for the Porsche Cayenne to have a successful Bluetooth connection but unable to play music. Immediate inspection and repair are required. Steps to troubleshoot when music cannot be played: Confirm that the pairing is successful but music still cannot be played. Check if the phone can play music normally through external speakers. Test whether the Bluetooth connection with headphones or other Bluetooth devices works properly. If it works, the issue may be with the phone's Bluetooth; otherwise, the problem lies with the car's system. The role of car Bluetooth: Bluetooth car phone is designed for driving safety and comfort, allowing drivers and passengers to communicate with the outside world without the need for cables or phone holders. The Bluetooth hands-free system enhances driving safety and comfort.

16

5

Share

Is the Porsche Macan a four-wheel drive vehicle?

Porsche Macan is a four-wheel drive vehicle. It is equipped with a full-time four-wheel drive system and uses a multi-plate clutch type central differential. The function of the four-wheel drive system: Vehicles equipped with a full-time four-wheel drive system have power to all four wheels at all times. The full-time four-wheel drive system can improve the mechanical grip of the wheels, and the improved grip can also enhance the vehicle's handling. Limitations of the four-wheel drive system: Part-time four-wheel drive relies on operating the transfer case to switch between two-wheel drive and four-wheel drive. Since there is no central differential in the transfer case, part-time four-wheel drive vehicles cannot use four-wheel drive on hard surfaces (paved roads).

13

1

Share

Is the wheel turned too early or too late when the corner is pressed during reverse parking?

What Causes the Steering Wheel to Feel Heavier?

What Causes the ABS Yellow Light to Illuminate?

Can a Temporary ID Card Be Used for Subject 2 Driving Test?

What's the reason for a car navigation screen going black with sound?

Is it normal for the Porsche Cayenne to have a successful Bluetooth connection but unable to play music?

Is the Porsche Macan a four-wheel drive vehicle?

What to Do If the Mitsubishi ASX Has High Fuel Consumption?

What Causes Difficulty in Cold Starting a Car Engine?

What Causes the Odor When Turning on the Car Air Conditioner?

Can Tap Water Replace Windshield Washer Fluid?