Is the Volvo V60 a four-wheel drive vehicle?

1 Answers
MacLiam
07/29/25 4:02pm
The Volvo V60 is not a four-wheel drive vehicle. This model adopts a front-engine, front-wheel-drive layout and offers two powertrain variants: the T4 and T5 models. The engines are available in high and low power versions. The T4 model is equipped with an engine delivering a maximum power of 190 horsepower and a maximum torque of 300 Nm, while the T5 model features an engine with a maximum power of 245 horsepower and a maximum torque of 350 Nm. In terms of transmission, the Volvo V60 is paired with an 8-speed automatic transmission. The engine boasts a compact design, with both the cylinder block and cylinder head made of aluminum. Through technologies such as direct fuel injection, turbocharging, dual overhead camshafts, four-valve structure, and continuously variable valve timing, the engine's fuel efficiency is significantly enhanced.
Was this review help?
3
4
Share
More Forum Discussions

How to Adjust Belt Misalignment?

Methods to adjust belt misalignment are as follows: 1. Correctly install the self-aligning idler set. When installing the self-aligning idler set, methods such as four-link type, vertical roller type, and intermediate rotating shaft type can be adopted. The principle is to use blocking or the idler's rotation in the horizontal plane to block or generate lateral thrust, causing the belt to automatically center and achieve the purpose of adjusting belt misalignment. The force situation is the same as that of the inclined force of the load-bearing idler set. 2. Adjust the tensioning section of the belt conveyor. There are two redirecting rollers at the upper end of the counterweight tensioning position. These two redirecting rollers must not only be perpendicular to the length direction of the belt but also be horizontal to the centerline of their axis. 3. Pay attention to the working direction of the belt and the trend of misalignment. 4. Effectively adjust the positions of the redirecting roller and the driving roller. 5. Adjust the position of the load-bearing idler set. When determining the direction of belt misalignment, the side of the idler set towards which the belt is misaligned should be moved forward in the direction of the belt's movement, or the other side of the idler set can be moved backward.
10
2
Share

What is the fuel tank capacity of the 8th generation Accord 2.4 in liters?

The fuel tank capacity of the 8th generation Accord 2.4 is 47 liters. Among vehicles in the same class, the 2021 facelifted Excelle has a fuel tank capacity of 44 liters, while the 2022 classic Sylphy has a fuel tank capacity of 50 liters. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, also check if the ventilation holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the fuel tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out while driving. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates that the fuel is almost empty, and when it is near F, it indicates that the fuel level is sufficient.
20
4
Share

What causes the air conditioning in a Cadillac ATS-L to not cool?

Here are the reasons why the air conditioning in a Cadillac may not cool: Blocked expansion valve in the air conditioning system: This prevents the refrigerant from circulating properly, leading to a lack of cooling. The hot/cold air blend door may malfunction, causing the hot air door to open while driving. Another issue is the evaporator freezing up during operation, which blocks cold air from being blown out. This is usually accompanied by a noticeable reduction in airflow. System malfunction: This can sometimes prevent the electromagnetic clutch coil from engaging properly. Additionally, a faulty electromagnetic clutch coil may fail to engage consistently.
2
0
Share

Can the driver's window of the Lamando not be one-touch raised or lowered?

The driver's window of the Lamando can be one-touch raised or lowered. One-touch window setting method: Pull up the window button to raise the window to the top, and hold the button in the up position for 5 seconds. Then press the window button to lower the window to the bottom, and hold the button in the down position for 5 seconds. After this setup, the one-touch function of the window will be restored. The setting method for the other three windows is the same. Function of one-touch window: The one-touch window refers to a system where the car window glass can be fully raised or lowered with a single press of a button. Cars equipped with one-touch windows have a two-stage window control switch. The first stage works like a regular power window, while the second stage allows the window to automatically open or close completely with just a single press and release.
12
3
Share

How Long Is the Warranty for the Camry Hybrid Battery?

The warranty for the Camry Hybrid battery is generally 8 years. The warranty period may vary slightly depending on the manufacturer and brand. Battery Lifespan: The Camry battery can last around 8 years. Toyota provides an 8-year warranty for the battery, and within this period, unless the environment is extremely harsh or usage habits are particularly poor, there usually won't be significant issues. After 8 years of use, it's advisable to replace the battery. Battery Capacity: The normal usage range for the battery is between 40%-80%. Two bars correspond to a capacity of 40%-45%. Three bars correspond to 45%-50%. Four to five bars correspond to 50%-55%. Six bars correspond to 55%-65%. Seven bars correspond to 65%-75%. Eight bars (full) correspond to 75%-80%.
1
0
Share

What Causes Hard and Ineffective Braking in Cadillac?

Here are the reasons for hard and ineffective braking in Cadillac: Vacuum-related reasons: Factors affecting vacuum include: cracks in the atmospheric valve seat, fatigue damage to the diaphragm, cracks or failure in the vacuum valve seat, and failure of the one-way valve in the vacuum hose. Free travel-related reasons: No free travel or insufficient free travel in the brake pedal may lead to hard braking or excessive pedal force. Jump value and jump point-related reasons: The jump value is not only the main cause of hard braking but also a quantitative indicator of it. A high jump value is determined by the height of the jump point, and the initial feel of pedal force is also influenced by the jump point's height.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.