Is the Volvo S60 domestically produced?

1 Answers
CodyLynn
07/30/25 4:30am
Volvo S60 is a domestically produced car. The Volvo S60 has been localized for production in China. The domestically produced Volvo S60 pure gasoline version is equipped with a T5 engine, paired with an 8AT transmission. Additionally, plug-in hybrid versions will also be domestically produced in the later stages. Relevant information about the Volvo S60 is as follows: 1. Exterior: The front face design of the S60 is novel and unique, with smooth lines, giving a visual impression similar to a hatchback model; the overall shape is stylish and stable, without losing its grandeur; the rear design lacks innovation. 2. Interior: The interior carries Volvo's unique elegance and simplicity, with a strong sense of luxury and is very beautiful; it features fine craftsmanship and rich configurations, with firm and comfortable leather seats; the center console layout is reasonable, and the button arrangement is convenient for operation. 3. Handling: The overall handling of the Volvo S60 is flexible, with smooth gear shifting; the steering wheel feels good, with clear direction; the suspension tuning is well-done, and the chassis has good passability; the engine noise is relatively small, with an open driving view and clear road feel; when cornering at high speed, the sense of roll is small.
Was this review help?
9
2
Share
More Forum Discussions

What is the 0-100km/h acceleration time for the CHR Hybrid?

First, set the Toyota CHR to sport mode. With a full-throttle start, there will be slight wheel spin on the front wheels, but this does not affect the car's response. The body reacts promptly, and the initial acceleration feels strong. The final 0-100km/h test result is 9.32 seconds. As a compact SUV, the Toyota CHR's fuel consumption should not be very high. According to the combined fuel consumption data released by the Ministry of Industry and Information Technology, the CHR's fuel consumption is 5.7L/100km. Of course, this figure is not the actual fuel consumption. Based on independent tests by owners, the actual fuel consumption of the Toyota CHR is around 6.8L/100km. This model performs well in terms of power. First, the fuel consumption is relatively low, and the 0-100km/h performance is quite good.
16
2
Share

How to Distinguish Between a 6-Volt and 12-Volt Motorcycle Battery?

Motorcycle batteries come in two types: 6-volt and 12-volt. However, 6-volt batteries were used in older models without electric starters and are now obsolete. So, how can you tell if a motorcycle battery is 6-volt or 12-volt? Here are some methods: 1. Use a multimeter to directly measure the voltage. 2. Each battery cell is 2 volts. If the battery has a transparent casing, you can count the number of cells: 3 cells indicate 6 volts. For opaque casings, remove the top cover and count the number of holes. For example, a battery with 6 holes is 12 volts. 3. If you can find the model or specifications on the casing, you can look up the voltage value online. Some batteries even have the voltage value printed directly on them.
3
2
Share

Is the rear seat space of the Toyota C-HR very small?

The rear seat space of the Toyota C-HR is not very small. Here is more information about the Toyota C-HR: 1. Exterior: The new car features boomerang-shaped taillights similar to the Civic Coupe, with black mirror housings, body panels, spoilers, and a floating C-pillar adding a touch of crossover sportiness. 2. Interior: The overseas version is equipped with an 8-inch multimedia touchscreen, and the extremely minimalist center console button layout ensures a clean visual effect. Additionally, the new car comes with an upgraded Toyota HMI human-machine interface system as the vehicle's multimedia information system. 3. Powertrain: The overseas 1.2T model has a maximum output of 85kW (116PS) and a peak torque of 200N·m, paired with a simulated 7-speed CVT automatic transmission. The hybrid model is equipped with a 1.8L Atkinson-cycle four-cylinder engine + two electric motors, delivering a combined output of up to 90kW (122PS) with a thermal efficiency exceeding 40%.
19
5
Share

What are the reasons why the motorcycle still won't start after replacing the spark plug?

Reasons why the motorcycle won't start after replacing the spark plug: 1. Quality issues with the spark plug itself. 2. Ignition coil failure. 3. High voltage coil failure. 4. Magnetic coil failure. 5. Ignition switch lock failure. 6. Short circuit or open circuit in the wiring harness. Motorcycle spark plug replacement steps: First locate the cylinder head position, find the spark plug cap cover, and remove the spark plug cap cover. Before removal, you can use a spray gun to clean the surrounding area to avoid debris falling into the combustion chamber through the installation hole when removing the spark plug. Use the onboard/special tool to unscrew the spark plug counterclockwise. If there is no dedicated removal tool, you can also use a wrench to turn it counterclockwise. Remove the spark plug body by hand and begin inspection and cleaning. Since the onboard tools lack magnetic attraction and a fixed base, the spark plug may drop during removal. After removing the spark plug body, replace it with a new spark plug following the original steps.
6
3
Share

What causes the EPC light to illuminate and fuel delivery failure in JAC diesel vehicles?

JAC diesel vehicles experiencing EPC light illumination and fuel delivery failure may have the following causes: 1. Air intake system leaks, causing the engine control unit to detect the issue and trigger the EPC warning light. This situation also extends to avoiding removing the engine oil dipstick or opening the oil filler cap while the engine is running. 2. When the EPC light illuminates, use a decoder for fault diagnosis and troubleshooting. If fault code 17550 appears, indicating load recording value below threshold; or both 17550 and 17961 appear, suggesting unreliable signal ratio between height sensor and intake manifold pressure (potentially caused by a failed intake pressure sensor), inspect the electronic throttle body. If excessive dirt is found, clean the throttle body and perform basic setting 01-04-060. 3. Actual issues in components or wiring of the engine's electronic throttle system can generally be identified through conventional electrical testing methods. 4. Other comprehensive factors: Engine oil must be filled strictly according to specifications, as overfilling affects mixture concentration and may cause abnormal EPC activation; similarly, excessively low cylinder compression pressure can also lead to such faults.
7
0
Share

How to Start a Porsche Cayenne?

Porsche Cayenne starting method is as follows: 1. The Porsche Cayenne uses a twist-type ignition device, with the knob located on the lower left side of the steering wheel; 2. The starting steps for the Porsche Cayenne are similar to those of traditional cars: press the brake pedal and turn the ignition knob clockwise. Here is an introduction to the Porsche Cayenne: 1. In terms of appearance, the Cayenne has a stylish and dynamic look; it is high-end, elegant, and luxurious. It offers ample space; the interior craftsmanship is refined, and the configuration is quite rich. It has good handling performance and a high safety rating. 2. In terms of power, as a 5-seat super SUV, the Porsche Cayenne Turbo-S is equipped with a powerful 520-horsepower turbocharged engine, combined with a dynamically tuned chassis to satisfy enthusiasts of high-performance cars, and it provides the highly praised all-wheel drive. 3. In terms of interior, the Porsche Cayenne's interior craftsmanship is quite refined; the configuration is relatively complete; the seats are comfortable; features like the heated steering wheel and the armrest design next to the seats are quite user-friendly; it also offers optional configurations such as a panoramic sunroof and compass.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.