Is the Volkswagen T-Cross compliant with China 6 emission standards?

1 Answers
MacBrayden
07/30/25 2:12am
Volkswagen T-Cross is compliant with China 6 emission standards. All models of the Volkswagen T-Cross equipped with the 1.5-liter naturally aspirated engine and the 1.4-liter turbocharged engine meet the China 6 emission standards. If the region or city where you are located is about to implement or has already implemented the China 6 standards, you need to purchase a vehicle that complies with the China 6 standards when buying a car. The 1.4-liter turbocharged engine of the Volkswagen T-Cross has a maximum power of 110 kW, a maximum torque of 250 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1750 to 3000 rpm. The 1.5-liter naturally aspirated engine of the Volkswagen T-Cross has a maximum power of 83 kW, a maximum torque of 145 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 3900 rpm.
Was this review help?
11
1
Share
More Forum Discussions

What are the timed items in Subject 2?

Parallel parking and reverse parking are timed, with the timer starting when the vehicle reaches the starting point of these maneuvers. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1, C2), the test items include five mandatory components: reverse parking into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Below are some important notes for the Subject 2 test: 1. Fasten your seatbelt: Always buckle up immediately after getting in the car. Make sure not to fasten it backward or to the passenger seat, as the system will directly deem the test as failed. Do not unfasten the seatbelt during the entire test. 2. Adjust the seat and mirrors: After entering the vehicle, adjust the seat and mirrors, fasten the seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are essential. Ensure all preparations are complete before starting. 3. No stopping during the test: There is no time limit for reverse parking, but it is crucial not to stop during the maneuver. If the wheels remain stationary for 3 seconds, the system will judge it as an intermediate stop. Therefore, controlling the speed is key. 4. The time limit for starting on a slope is 30 seconds: The system will provide an audio reminder every 10 seconds during the 30-second period for starting on a slope. Exceeding this time will result in an automatic failure.
13
5
Share

Is It Dangerous to Leave a Lighter in the Car?

Dangerous. Leaving a lighter in the car can cause an explosion. Here are the details: 1. Reason: Lighters are filled with gas. Placing a lighter on the dashboard or instrument panel makes it prone to direct sunlight. After prolonged exposure to sunlight, the gas inside the lighter will continuously expand. Once it reaches a critical point, an explosion can occur, causing severe damage to the vehicle. 2. Precautions: During summer, try to avoid leaving lighters in the car as it poses significant safety risks. The main component of a regular lighter is liquid butane. High concentrations of butane can explode at room temperature of 20 degrees Celsius. If the outdoor temperature exceeds 30 degrees Celsius, the temperature inside the car can rise to 60-70 degrees Celsius after being exposed to sunlight, making lighters highly prone to causing explosion accidents. If a lighter self-detonates due to intense sunlight exposure, it is considered human-caused damage to the vehicle, and insurance companies will not cover the compensation.
1
5
Share

Should the front wheels cross the yellow line in the parallel parking test for Subject 2?

The front wheels should cross the line. Below is a relevant introduction about Subject 2: 1. Key points to note: Adjust the seat and rearview mirrors to your preferred position and fasten the seatbelt. Pay attention to controlling the vehicle speed (mainly by adjusting the clutch pedal height; you can lightly press the brake if necessary, but avoid stopping completely). The principle is "slow speed, quick steering." You can stop and wait in the sections between test areas, but once you enter a test area, you cannot stop midway during the operation. Listen carefully to the voice prompts and wait for the computer to confirm your operation (about 3 seconds) before proceeding to the next action—do not rush. Ensure you steer correctly: "Look at the front when moving forward, look at the rear when reversing, and steer toward the intended direction." Avoid turning the wheels while stationary (though it won’t incur penalties)—it’s better to stop with the wheels and steering aligned. 2. Main test items: Reversing into a garage—the candidate must find the right reference points, reverse in from one side, drive out to the other side, and then reverse in again from that side. Parallel parking—the candidate must park the vehicle sideways into the space and engage/disengage the handbrake. Driving through curves—the easiest part; follow the instructor’s guidance, using the front of the car to trace along the curb. Turning at a right angle—identify the reference point and steer sharply to pass. Stopping at a designated spot on an uphill slope and starting on a slope—pay close attention to the stopping position; incorrect positioning will result in penalties. When starting, find the clutch’s friction point to avoid stalling, and remember to engage and release the handbrake.
12
1
Share

Can Non-Freeze-Resistant Windshield Washer Fluid Damage the Car?

Non-freeze-resistant windshield washer fluid can damage the car, as it may cause harm to the vehicle. Non-freeze-resistant windshield washer fluid: Generally, non-freeze-resistant windshield washer fluid has a freezing point around 0 degrees Celsius. If the local temperature is low, the washer fluid may freeze, leading to issues such as the fluid itself freezing, severe cases where the washer fluid reservoir cracks, and damage to the windshield washer pump motor. Choosing windshield washer fluid: When selecting windshield washer fluid, freeze resistance should be the primary criterion. Choose a washer fluid with a freezing point at least 10 degrees below the local minimum temperature. Generally, branded washer fluids are categorized by temperature into different levels, allowing selection based on seasonal changes. Typically, 0-degree washer fluid can be used in summer, while in winter, washer fluids with at least -20 degrees or -35 degrees should be used.
13
3
Share

Can speed be increased by changing from 60v to 72v?

Changing from 60v to 72v cannot increase speed. Timely replacement of the transmission: During the operation of the transmission, the engine mount protects the transmission from bumps. It is a rubber product that prevents the vibrations generated during the transmission's operation from being transmitted to the vehicle body. After prolonged use, the transmission mount will age, and once it hardens, its ability to filter vibrations will decrease. Therefore, it is essential to replace it promptly when signs of aging appear. Consequences of not replacing the transmission: After aging occurs, it will not immediately affect driving safety in the short term. However, prolonged failure to replace it can lead to component failures, which will impact driving safety.
12
1
Share

Will the information be misused after losing the driver's license?

After losing the driver's license, the information will not be misused. Conditions for reissuing a driver's license: When a motor vehicle driver's license is lost, the motor vehicle driver shall apply for reissuance to the vehicle management office at the place where the motor vehicle driver's license was originally issued. During the period when the motor vehicle driver's license is lost, the motor vehicle shall not be driven. Materials required for driver's license reissuance: "Motor Vehicle Driver's License Application Form"; original and photocopy of the applicant's valid identity document; written statement of loss of the motor vehicle driver's license; 3 recent bareheaded front-view color photos (photo size: 32mm×22mm, head width 14mm—16mm, head length 19mm—22mm) and photo receipt.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.