Is the Vision X6 Pro equipped with an Aisin transmission?

2 Answers
McCourtney
07/29/25 3:39pm
The Vision X6 Pro is equipped with an Aisin brand transmission. The Vision X6 PRO model features a 6-speed automatic manual transmission and a 6-speed manual transmission, paired with a 1.4-liter 141 horsepower, 4-cylinder turbocharged engine. The engine delivers a maximum power of 104 kW and a maximum torque of 235 Nm. The vehicle is positioned as a compact SUV. The function of the transmission is to change the transmission ratio, expand the torque and speed of the driving wheels, enable the car to reverse, and facilitate gear shifting or power output. The Vision X6 Pro retains the previous 1.8L engine and adds a new 1.4T engine, matched with a Punch CVT transmission. In terms of driving experience, compared to the old 1.3T engine, the new Vision X6 is easier to drive, with more responsive performance, eliminating the sluggish reaction that felt like driving a boat. The downside lies in its support; the Vision X6 has a high center of gravity, and after accelerating, the lateral support for the body is not outstanding. Aisin transmissions are a Japanese brand, produced domestically in China, specifically in Xiangyang, Hubei. Chinese independent brands using Aisin transmissions include: BYD, Soueast, Great Wall, Brilliance, Changan, MG, Roewe, FAW Besturn, Dongfeng Fengshen, GAC Trumpchi, etc. Joint venture brands using Aisin transmissions include: Shanghai GM, SAIC Volkswagen, FAW Volkswagen, FAW Audi, Beijing Benz, Dongfeng Peugeot, Dongfeng Citroën, FAW Toyota, GAC Toyota, Changan Suzuki, etc. Aisin of Japan is the world's largest automatic transmission manufacturer and the fifth-largest automotive parts company globally. It was established in 1996 as a joint venture between Aisin and BorgWarner, a subsidiary of Aisin Seiki, which in turn holds 22.2% of Toyota Group's shares. Almost all Toyota models use Aisin automatic transmissions.
Was this review help?
2
4
Share
LukasLee
08/15/25 3:07am
I've researched the configuration of Geely cars, and the Vision X6 Pro automatic model indeed uses a 6AT transmission, but not Aisin's. It utilizes the Australian DSI transmission technology acquired by Geely, which has proven its reliability in models like the Boyue. I've personally test-driven this car, and the gear shifting smoothness is better than expected, with good control over low-speed jerks. Although Aisin has a better reputation, the DSI system is quite maturely tuned and fully adequate for daily family use. However, the gear shift response is slightly slower during aggressive driving, given the cost constraints. I recommend you focus on the smoothness of the 2nd to 3rd gear shifts during your test drive, as personal experience is more reliable than just looking at specifications.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the best way to clean an oxygen sensor?

Oxygen sensors can be cleaned. For mild dirt, carburetor cleaner can be used, while for severe dirt, a diluted sulfuric acid and ferric chloride solution is recommended. The specific cleaning steps for an oxygen sensor are as follows: 1. Prepare a cleaning solution using 5-10% ferric chloride solution mixed with excess hydrochloric acid. The exact ratio depends on the condition of the sensor's surface. Remove the oxygen sensor and soak it in the solution for 10-15 minutes. After soaking, rinse it thoroughly with water. Ensure that the four surrounding holes are clear, and when viewed from the bottom, the internal substrate should appear white after cleaning. 2. If the cleaning is not satisfactory, repeat the process until the white substrate becomes visible.
19
1
Share

Which is brighter, xenon headlights or halogen headlights?

Xenon headlights are brighter than halogen headlights. The luminous arc of xenon lamps is the same length and diameter as the tungsten filament of halogen lamps, but the brightness of xenon lamps is three times that of halogen lamps. Xenon lamps can produce 3200 lumens, while halogen lamps only produce 1000 lumens. However, in low-visibility weather such as rain or fog, halogen lamps have better penetration. Below is a detailed introduction to both: 1. Xenon lamps (HID), also known as high-intensity discharge lamps, work by increasing the 12V voltage to an ultra-high voltage of 23000V, which excites the xenon gas filled in the quartz tube to emit light. The voltage is then converted to about 85V to stably and continuously supply the xenon bulb with power. Additionally, HID lamps avoid the issue of halogen lamps, which tend to oxidize and dim over time. Xenon lamps provide a wide and long illumination distance. 2. Halogen lamps are essentially a special type of incandescent lamp. Their principle is based on the fact that when current passes through a resistor, it generates heat. When the temperature is high enough, it emits blackbody radiation in the visible light spectrum.
17
3
Share

Is a CVT Transmission a Manual Transmission?

A continuously variable transmission (CVT) is an automatic transmission. Automatic transmissions utilize planetary gear sets to change gears, automatically adjusting based on throttle pedal position and vehicle speed. The driver only needs to operate the accelerator pedal to control the speed. Advantages and disadvantages of CVT transmissions: The advantages of CVT transmissions include compact size, simple structure, easy maintenance, and smooth operation. They are primarily used in Japanese, Korean, and some domestic vehicles. CVT transmissions keep the engine within an optimal RPM range, making vehicles equipped with them generally more fuel-efficient. The disadvantages are lower torque capacity and susceptibility to slippage, which is why CVT transmissions are typically paired with small-displacement engines. Larger displacement engines with higher torque usually require AT transmissions. Precautions for using CVT transmissions: When using a CVT transmission, it's important to use the handbrake for assistance when starting on a slope to prevent rolling back. This is because many CVT transmissions experience initial slippage during power engagement, making it difficult to prevent rolling on slopes during the initial power transfer phase. While driving, avoid shifting the gear lever to N, P, or R. Additionally, when changing from forward to reverse or vice versa, it's best to come to a complete stop, hold the brake pedal down, and then operate the gear lever to prevent potential transmission damage.
20
5
Share

What Causes the Engine Belt to Squeak?

The reasons for engine belt squeaking: It is caused by belt wear and aging, and timely replacement is necessary. Consequences of engine timing belt breakage: It will cause the engine to fail to operate normally, seriously affecting the engine's working condition, and may damage the valves, pistons, and cylinder walls. When cracks and aging appear on the engine timing belt, it should be replaced promptly. Below are the steps for replacing the timing belt: 1. Secure the crankshaft: Remove the valve cover, dismantle the crankshaft pulley, and take off the timing chain cover; rotate the crankshaft to align the first cylinder to top dead center, then tighten the crankshaft fixing screw to secure the crankshaft; 2. Align the camshaft grooves: Rotate the intake and exhaust camshafts; there are grooves at the rear of the camshafts, align the grooves of both camshafts horizontally and insert the special tool; 3. Install the timing chain: Remove the old chain and install the new one. The crankshaft pulley does not have a keyway; during installation, align the round hole on the pulley with the groove on the chain cover; 4. Adjust the sensor position: The crankshaft position sensor is adjustable; ensure there is no gap during installation, otherwise, it may trigger a fault code; the crankshaft sprocket and pulley can rotate freely.
8
0
Share

What maintenance items are required for a new car at 20,000 kilometers?

The 20,000-kilometer maintenance is typically the third service for a car and is generally considered a major service. Routine maintenance items for the third service include changing the engine oil, oil filter, air filter, cabin air filter, spark plugs, etc. Some brand manufacturers may add additional maintenance items. Below are the specific details: 1. Changing the engine oil and oil filter is essential. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance deteriorates. Over time, it can no longer protect the engine effectively. The oil filter prevents impurities from mixing into the oil, which could cause oxidation, leading to sludge and clogging the oil passages. The engine oil and oil filter should always be replaced together. 2. Secondly, the air filter also needs replacement by this point. If it wasn't replaced during the 10,000-kilometer maintenance, it must be replaced at the 20,000-kilometer service. The air filter prevents dust and particles from being drawn into the engine during the intake process. If the filter is not cleaned regularly, dust can enter the engine, causing abnormal wear on the cylinder walls. 3. Additionally, if the car uses standard-material spark plugs, they should be prepared for replacement at 20,000 kilometers. Spark plugs directly affect the engine's acceleration performance and fuel efficiency. If you notice a lack of engine power while driving, it's time for maintenance. Different materials of spark plugs have varying lifespans.
20
1
Share

What is the working principle of automotive disc brakes?

Disc brakes (also called disc brakes) consist of brake discs and hydraulic piston calipers, and there are ventilated discs, ceramic discs, etc., as well as two-piston, four-piston, and six-piston calipers. The principle is that hydraulic pressure pushes the pistons against the brake disc surface to generate braking force. Below are related introductions: 1. The advantages of disc brakes are high braking efficiency, simple structure, and easy drying if water enters. The disadvantages are easy heat fade and low load capacity. They are mostly used in small vehicles. Ventilated discs mainly improve cooling effects, while ceramic discs mainly enhance resistance to heat fade. 2. Disc brakes are sometimes also called rotor brakes, and they are divided into ordinary disc brakes and ventilated disc brakes. Ventilated disc brakes reserve a gap between two brake discs to allow airflow to pass through. Some ventilated discs also have many round ventilation holes drilled on the disc surface, or ventilation grooves cut into the disc surface, or rectangular ventilation holes pre-formed. Ventilated disc brakes utilize the effect of airflow, and their cooling performance is better than that of ordinary disc brakes.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.