Is the vehicle license processed when getting the license plate?

1 Answers
EmilioLynn
07/29/25 10:17pm
Vehicle license is not processed when getting the license plate; it needs to be obtained in advance. Below is relevant information about the driver's license: 1. Introduction: The full name of the driver's license is the motor vehicle driving license, also known as the "driver's license." It is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive randomly. Generally, individuals cannot drive on the road without a license. However, for those who have mastered safe driving skills, the document that permits them to drive on the road is the "driver's license." 2. Definition: Internationally, the driver's license is defined as: "A document issued by the competent authority permitting the holder to drive a motor vehicle."
Was this review help?
11
2
Share
More Forum Discussions

How to Eliminate the Power Steering Malfunction in Malibu?

If the Malibu displays a power steering malfunction warning, it indicates a fault in the vehicle's power steering system that requires immediate inspection and repair. Common issues include abnormal noises during steering, steering gear oil leakage, and weakened automatic return function. Please visit a 4S shop for diagnosis and repair; the fault can be automatically cleared once resolved. Additional Information: Common faults and causes in vehicle steering systems include: 1. Abnormal noises during steering are typically mechanical issues, such as damage to the kingpin and bushing or failure of the column thrust bearing. During inspection, turn the steering wheel left and right to locate the noise source for disassembly and repair. 2. Steering gear oil leakage usually occurs at the steering gear cover, side cover, or the connection between the steering shaft and the pitman arm. These areas have seals, and replacing the oil seals and gaskets can resolve the issue. Leakage in other areas may indicate casting defects or cracks in the steering gear housing. Minor cracks and defects can be sealed with Loctite 290 high-penetration sealant. 3. Most vehicles feature an automatic return function for the steering wheel. In hydraulic-assisted vehicles, this function may weaken due to hydraulic damping but should still retain some capability. If returning the steering wheel requires the same effort as turning it, the return function is faulty, typically due to mechanical issues in the steering system.
13
5
Share

Does Honda Earth Dreams Include Hybrid Systems?

Honda's Earth Dreams technology includes hybrid systems. Here is relevant information: 1. Honda's Earth Dreams hybrid systems can be found in many models. The pure gasoline engines equipped with Earth Dreams technology offer strong power and relatively low fuel consumption. 2. Hybrid systems generally refer to the combination of fuel and electric power. The output characteristics of internal combustion engines and electric motors are opposite: electric motors can deliver strong torque at low speeds, providing ample power for vehicle acceleration from a standstill, while internal combustion engines increase output power and torque as the speed rises, supplying power for mid-to-high-speed acceleration. Besides enhancing the vehicle's power performance, hybrid systems also effectively improve fuel economy.
2
0
Share

How to Operate a Wheel Alignment Machine?

The operation steps of a wheel alignment machine are as follows: 1. Park the vehicle on a level surface, check if the tire pressure on both sides is the same, and adjust if necessary; 2. Install the sensors, turn the steering wheel left and right as instructed by the computer, and check the data of the front and rear axles; 3. Install the brake lock and fix the steering wheel; 4. Lift the vehicle and adjust the toe-in, caster, and camber angles of the front axle, and check and adjust the toe-in of the rear axle; 5. Tighten the bolts and conduct a test drive. Alignment requirements: 1. Drive the vehicle onto the four-post lift and park it steadily, ensuring the vehicle's center aligns with the lift and turntable center. 2. Check and, if necessary, modify the vehicle specifications. 3. Strictly follow the steps displayed by the alignment machine without omission. For example, perform wheel runout compensation and tire inspection as required. The relevant tire inspection content should be input into the instrument as specified.
13
0
Share

Where is the cabin air filter located in the old Sonata model?

The cabin air filter in the old Beijing Hyundai Sonata is located behind the glove compartment on the passenger side. Below are the steps to replace the cabin air filter in the old Sonata model: 1. Open the glove compartment on the passenger side and press the button at the top to remove the glove compartment. 2. After removing the glove compartment, you will see the cabin air filter. Use a screwdriver to pry open the clips of the cabin air filter and then remove it. 3. After removing the old cabin air filter, install the new one with the white side facing down and the black side facing up. 4. Once the new cabin air filter is installed, reattach the glove compartment in the reverse order of removal. Below are the functions of the cabin air filter: 1. Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. Separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, providing strong and long-lasting moisture adsorption. 4. Prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers and safe driving.
12
1
Share

How many days can the annual inspection be overdue?

Annual vehicle inspections cannot be overdue - they can only be conducted in advance, not delayed. Driving with an expired inspection is illegal. According to relevant regulations, vehicle owners may apply for an inspection compliance mark at the local vehicle management office up to three months before the expiration of the current inspection period. Before applying, the owner must resolve all traffic violations and accident records associated with the vehicle. During application, the owner must complete an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and vehicle safety technical inspection compliance certificate. The vehicle management office should verify submitted documents within one working day and issue the inspection compliance mark upon approval.
4
0
Share

How to turn off the auto start-stop function in RAV4?

RAV4 auto start-stop deactivation method: Simply press the button to turn off the auto start-stop. The auto start-stop button is located to the left of the cigarette lighter, featuring an icon of a circle with the letter A inside and the letters OFF below. The auto start-stop is enabled by default and activates every time the vehicle is restarted. This means the function cannot be permanently disabled; you need to press the button each time you start the vehicle to deactivate it. The RAV4 is a compact SUV under Toyota, with dimensions of 4600mm in length, 1855mm in width, 1680mm in height, and a wheelbase of 2690mm. In terms of configuration, this vehicle comes standard with VSC vehicle stability control system, 6 airbags, TRC traction control system, HAC hill-start assist control, and automatic limited-slip differential.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.