Is the Vehicle License Issued at the Vehicle Management Office?

How Much Does a Car Weigh?

A typical small passenger car weighs approximately 1400kg to 1500kg. Common vehicle weights for sedans with engines above 2.0L include: Toyota Crown 3.0 (1650kg), Reiz 2.5 (1560kg), Camry 2.4 (1530kg), Guangzhou Honda 2.4 (1447kg), Mazda6 2.3 (1437kg), and Teana 2.3 (1545kg). 1. Korean models: Sonata 2.0 (1444kg), NF Sonata 2.4 (1463kg), Optima 2.0 (1480kg). 2. American models: Regal 2.5 (1557kg), Epica 2.0 (1482kg), Mondeo 2.0 (1445kg), Focus 2.0 (1340kg). 3. German models: BMW 3 Series (1395kg), BMW 5 Series (1570kg), Passat 1.8T (1450kg), Passat Lingyu 1.8T (1522KG), Audi A4 1.8T (1470kg), Audi A6 2.4 (1560kg), Audi A6L 3.0 (1775kg). 4. French models: C-Triomphe 2.0AT (1424kg), Peugeot 307 2.0 (1341kg), Xsara 2.0 (1185kg). 5. Domestic models: New Eastar 2.0 (1460kg), Brilliance 2.0 (1450kg), Besturn 2.3 (1470kg), Chery V5 2.4 (1505kg), Junjie 2.0 (1475kg), Zunchi 2.4 (1445kg). Magnesium alloy is internationally recognized as the green engineering structural material for the 21st century. Replacing steel with magnesium alloy in automobile and motorcycle manufacturing can not only achieve weight reduction, lower fuel consumption and pollution, but also reduce vibration and noise while improving the performance of the power transmission system.

1

4

Share

What is the appropriate tire pressure for a Mazda CX-5?

The recommended tire pressure for the Mazda CX-5 ranges from 2.4 to 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Mazda CX-5 does not display specific tire pressure monitoring values but is equipped with a tire pressure monitoring function. The tires have built-in tire pressure sensors, and when abnormal tire pressure is detected, a warning light will illuminate on the dashboard. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear of the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, the tire pressure monitoring system was not reset in time, causing it to retain the previous data, which triggers the warning light. Simply reset the tire pressure monitoring to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.

2

0

Share

What Causes Battery Degradation in New Energy Vehicles?

Here are the reasons for battery degradation in new energy vehicles: 1. Lithium battery abuse: Lithium batteries show no significant capacity loss when the SOC is below 120%. At excessively high SOC levels, the decomposition rate of the electrolyte increases, forming a thick deposition layer on the graphite anode, which contains precipitated lithium; 2. Temperature factors: Temperature is one of the key factors affecting the lifespan of lithium batteries. Excessively high or low temperatures can reduce the content of active lithium ions, damage the structure of electrode materials, and dissolve metal ions, leading to severe battery capacity degradation.

15

3

Share

Is the Kia Sportage Fuel Efficient?

The Kia Sportage has a combined fuel consumption per 100 kilometers as follows: 2.0MT 8.3L; 2.0A/MT 9.3L; 2.4A/MT 9.5L. The reasons for increasing fuel consumption in vehicles are as follows: 1. Impact of temperature on fuel consumption fluctuations: Generally, in winter when temperatures are low, fuel consumption tends to increase, almost comparable to the fuel consumption when using air conditioning in summer. This is because low temperatures cause the engine to dissipate more heat. 2. Lack of regular vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing resistance in various moving parts of the engine, which requires more energy to overcome, thereby increasing fuel consumption. 3. Spark plugs need replacement: Spark plugs are often overlooked. Even if they can still function, worn spark plugs may cause delayed ignition due to insufficient ignition energy, missing the optimal ignition timing.

18

0

Share

What causes the abnormal noise when turning on the air conditioning in a Peugeot 408?

Here are the reasons for the abnormal noise when turning on the air conditioning in a Peugeot 408: 1. Cooling fan: The noise comes from the car's radiator cooling fan. When the fan receives the command to turn on the air conditioning, it operates at high speed. Normally, it only works when the water temperature is high, but it needs to run continuously when the air conditioning is on, which significantly increases the noise. If the fan becomes unbalanced due to dirt accumulation, the noise becomes even louder, accompanied by body vibration. 2. Blower motor: The noise originates from the air conditioning blower motor. When the blower motor bearings are worn or lack lubrication, it can produce a sharp noise. Another cause is not replacing the air filter in time, leading to dust accumulation and imbalance, which can also cause resonance and abnormal noise. 3. Compressor belt: The noise comes from the air conditioning compressor belt. When the air conditioning is turned on, the compressor engages, increasing the load on the belt. If the belt is loose or aged, it can produce abnormal noise.

4

3

Share

What Causes a Vehicle to Fail to Start After Running Out of Fuel and Stalling?

Possible reasons why a car won't start after running out of fuel and stalling include: 1. Fuel depletion: The fuel in the tank and lines has been completely exhausted, and the newly added fuel hasn't reached the lines yet. It's recommended to attempt starting the engine several times. 2. Fuel pump damage: If the car consistently fails to start, the fuel pump may be damaged. Running the tank dry or frequently driving with low fuel levels can damage the fuel pump. 3. Different fuel pump types: For electronic fuel pumps, running out of fuel may cause the gasoline pump to burn out. For mechanical pumps, the fuel lines may be empty after running dry, and you may need to wait for fuel to reach the pump before starting. 4. Electrical leakage: Check for any electrical leakage in the wires connected to the ignition module. Also, consider whether an anti-theft device with a fuel cutoff function hasn't been deactivated. 5. Throttle body issues: If none of the above problems are present, it's advisable to visit a repair shop to retrieve fault codes and check for potential issues with the ignition module, throttle position sensor, or throttle body.

17

4

Share

Is the Vehicle License Issued at the Vehicle Management Office?

How Much Does a Car Weigh?

What is the appropriate tire pressure for a Mazda CX-5?

What Causes Battery Degradation in New Energy Vehicles?

Is the Kia Sportage Fuel Efficient?

What causes the abnormal noise when turning on the air conditioning in a Peugeot 408?

What Causes a Vehicle to Fail to Start After Running Out of Fuel and Stalling?

What Causes Noise from the BMW 5 Series Chassis When Starting?

What Causes a Car to Frequently Lose Power and Fail to Start?

Where is the Bluetooth in the old Dongfeng Nissan models?

What does VDCOFF mean in a car?