Is the Vehicle Inspection Sticker Still Required?

1 Answers
LeNevaeh
07/29/25 9:21pm
Vehicle inspection stickers are no longer required. Below is relevant information about vehicle inspections: 1. According to China's motor vehicle safety inspection standards, motor vehicles are categorized into large vehicles, small vehicles, specialized vehicles, and special-purpose vehicles. Large vehicles refer to those with a total mass exceeding 4,500 kg, vehicle length of 6 meters or more, or seating capacity of 20 or more people. Small vehicles refer to those with a total mass below 4,500 kg, vehicle length under 6 meters, or seating capacity fewer than 20 people. 2. Driving a motor vehicle requires a valid Chinese driver's license and proof of passing inspection: The procedure involves first ensuring there are no traffic violation records; if any exist, they must be resolved at the traffic police station. Then, prepare the 'Compulsory Traffic Accident Liability Insurance Policy' for the motor vehicle, paying special attention to whether the insurance certificate includes the vehicle and vessel tax information. If not, the vehicle and vessel tax payment receipt must also be presented.
Was this review help?
19
5
Share
More Forum Discussions

Why Can't You Use High Beams?

The main reason for not using high beams is that it can affect driving safety. Here are some precautions for using high beams: 1. Slow down: When visibility is poor at night, slowing down is more helpful for safety than turning on high beams. 2. Use high beams as little as possible: Urban roads nowadays have ample lighting facilities, so drivers should try to avoid using high beams. 3. Alternate between lights when necessary: High beams can be used alternately with low beams. When there is oncoming traffic, switch to low beams promptly. 4. Regularly check your light settings: If oncoming vehicles frequently flash their lights at you, check whether you have inadvertently turned on your high beams. 5. Avoid high beams in foggy weather: Since air transparency is poor in such conditions, the light will scatter in the air, increasing the impact on oncoming vehicles.
5
3
Share

What is the remedy for stalling on a slope in Subject 2?

You can restart within three seconds, which will only deduct 10 points. When starting on a slope, press the clutch with your left foot and the brake with your right foot. Slowly release the clutch while paying attention to the vibration of the car body. Once you notice the front of the car lifting slightly, gradually release the brake pedal, and the car will move forward. Regarding slope starting: This mainly relies on the feel for the clutch. During regular training, the coach often emphasizes clutch control, and with repeated practice, you will naturally develop a sense for it. Stalling during slope starting may occur if the clutch pedal is lifted too high and the brake is released too quickly. If the clutch pedal is lifted too low and does not reach the semi-engagement position, the car may roll backward when the brake is released. To control the backward movement (exceeding 20 cm results in failure), always release the brake slowly. If you notice the car starting to roll back, immediately press the brake firmly to stop the car, then lift the clutch pedal slightly before slowly releasing the brake again.
1
1
Share

What is the symbol for rearview mirror heating?

The symbol for rearview mirror heating is a rectangle with three upward-curving arrows inside. Here is an introduction to the rearview mirror heating symbol: 1. First type: Located near the air conditioning settings on the center console. 2. Second type: Located on the combination switch for electric rearview mirror adjustment, usually on the driver's side door panel, as a knob. It has several positions: L, 0, R, and a heating symbol. 3. Not all cars have the rearview mirror heating function: If you cannot find this button in the car, it means the vehicle does not have this feature. Regardless of the design, their function is the same. After pressing the button, the electric heating element behind the rearview mirror glass will quickly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. Warm air will emerge from both side mirrors, and the water droplets on the mirror surface will gradually evaporate as the temperature rises, while the fog will slowly disappear. This achieves the effect of heating the mirror, defogging, and defrosting. In cases of particularly heavy rain, its effectiveness may decrease and the effect may not be very noticeable.
12
2
Share

How to Determine the Position of Car Wheels While Driving?

Methods to determine the position of car wheels while driving: 1. To determine the position of the left wheel, observe the alignment between the wiper node and the centerline on the ground. When the wiper node coincides with the centerline, it indicates that the left tire will run over the target line. 2. To determine the position of the right wheel, when the line of sight from the right wiper node intersects with the target, it means the tire will run over the target line. Functions of tires: 1. Support the entire weight of the vehicle and bear the load of the car; 2. Transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. Reduce and absorb vibrations and impacts during driving, preventing severe vibrations and premature damage to car components; 4. Adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
14
0
Share

What is the range of the Ora R1?

Ora R1 has a comprehensive range of 351km. There are two versions of the Ora R1, one with a range of 310 kilometers and the other with a range of 351 kilometers. Here are the relevant details: Power: The car is equipped with an electric motor with a maximum power of 35kw and a maximum torque of 125 Nm, and it also uses a ternary lithium-ion battery pack provided by CATL. Range: To improve the car's range, it is also equipped with an economy mode, which can be switched at will during driving. Configuration: The car also features voice recognition, reversing camera, electric adjustment, and ECO mode. In high-end models, it is additionally equipped with daytime running lights, electronic handbrake, ESP body stability system, 6 airbags, and intelligent front-view system, further enhancing the car's safety. Safety configuration: The car body is made of high-strength rigid material with a hardness exceeding 60%. In case of a collision, the car's safety functions will immediately activate, cutting off power to the electrical equipment to provide more adequate protection for the occupants.
10
1
Share

What are the differences between domestically produced and imported BMW 5 Series?

Here are the differences between imported BMW 5 Series and domestically produced BMW 5 Series: 1. Different wheelbase: (1) The wheelbase of imported BMW 5 Series is 2975mm. (2) The wheelbase of domestically produced BMW 5 Series is 3108mm. 2. Different configurations: (1) The imported BMW 5 Series has additional features such as automatic anti-glare rearview mirrors and sport-style leather seats. (2) The domestically produced BMW 5 Series has additional features such as electric steering wheel adjustment, steering wheel memory, car networking, adaptive high and low beams, and cornering headlights. 3. Different manufacturing processes: (1) The technical level of workers and the rigor of work for imported BMW 5 Series are higher. (2) The technical level of workers for domestically produced BMW 5 Series is slightly lower.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.