···
Log in / Register

Is the vehicle code the same as the chassis number?

4 Answers
DeAlana
07/29/25 1:11pm
Vehicle code refers to the chassis number, also known as the Vehicle Identification Number (VIN). It is a unique set of numbers assigned to a vehicle, used to identify the manufacturer, engine, chassis serial number, and other specifications. Here are the ways to locate the vehicle code: 1. It can be found in the vehicle's accompanying documents. The chassis number is clearly marked on the vehicle registration certificate, and it is also recorded or pasted on the insurance policy and vehicle maintenance manual. 2. It can be found on the exterior of the vehicle. The most common location is on a label at the lower left corner of the windshield, which displays the 17-digit chassis number. 3. It can be found on the stamped marks on the vehicle body. During manufacturing, the chassis number is stamped onto the vehicle body to facilitate identification for registration or transfer of ownership. Common locations include under the seats, near the shock absorber in the engine compartment, or on the body frame in the trunk. The exact position may vary depending on the vehicle brand.
Was this review help?
5
1
Share
McBrayden
08/14/25 3:03am
To be honest, as a seasoned driver, I've always known that the vehicle identification number (VIN) typically refers to the chassis number, which serves as a unique ID for each car with a fixed length of 17 characters. You can find it in multiple locations on the vehicle, such as the front wall of the engine compartment or the sill plate below the driver's seat, where it's stamped and hard to remove. This code isn't just used for vehicle registration and insurance claims—it also helps you verify a car's history during used vehicle transactions, like avoiding accident-repaired vehicles. If it gets damaged or becomes illegible, dealing with it can be a headache since DMVs require it to be clearly visible. I recommend wiping and checking it with a cloth during every car wash to ensure it's not covered by dirt, especially in humid areas. Remember, it's not the engine number or chassis number—those are different identifiers.
Was this review help?
18
2
Share
Expand All
PatrickDella
10/09/25 8:22am
From my perspective, the vehicle identification number (VIN) and chassis number are the same thing - it's the unique identifier for a car. It's frequently used when purchasing or servicing vehicles. For example, at 4S shops, technicians will scan this code to record vehicle information and ensure proper parts matching. The location is easy to find - it's that long string of numbers and letters stuck on the lower left corner of the windshield in front of the driver's seat. This code involves security matters. If you lose the relevant documents, handling traffic violations or ownership transfers will become very difficult. In daily life, it's important to keep the corresponding records on the purchase invoice properly stored to avoid unnecessary hassles. Developing a habit of verifying it before each annual inspection can save you a lot of trouble.
Was this review help?
10
4
Share
Expand All
LukeRose
11/23/25 2:49am
I've read many car manuals, and the vehicle identification number (VIN) is essentially the chassis number. It's stamped on the car body, such as inside the door frame or under the hood, used to track the vehicle model and manufacturing year. Don't overlook this detail when purchasing a car—for example, you can check it in apps to see recall notices. Occasionally when friends ask me, I explain clearly that it's no more complicated than the engine number.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

Is Pre-check Necessary for One-Button Start?

One-button start vehicles do require a pre-check. The steps for starting a car with one-button start are as follows: 1. After the driver sits in the driver's seat, press the start button once to turn on the ACC light, then press it again to initiate the vehicle's self-check. 2. Depress the brake pedal and press the one-button start key to ignite the engine. 3. Release the foot brake; you may choose to warm up the engine (the warm-up time depends on the vehicle model and ambient temperature, but avoid sudden acceleration and braking in low-temperature conditions). 4. Depress the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Slowly release the foot brake, gently press the accelerator, and complete the starting process.
14
4
Share

Why is the car's one-button start not responding?

Car's one-button start not responding reasons are: 1. Poor internal contact of the one-button start button or poor contact of the button plug, resulting in the inability to start the vehicle normally; 2. Starter issues, such as open circuit of the starter electromagnetic clutch or poor contact of the starting circuit, can cause the vehicle to fail to start normally; 3. Poor contact between the body and engine ground wire, or open circuit of the ground wire, leading to the inability to start the vehicle; 4. Damage to the engine speed sensor causing the vehicle to fail to start; 5. Damage to the low-pressure fuel pump, preventing the supply of fuel to the vehicle; 6. Battery depletion, resulting in the inability to start the vehicle; 7. Smart remote key battery dead, unable to open the car door, leading to the inability to start the vehicle.
15
0
Share

Does the Mitsubishi ASX comply with China VI emission standards?

Among the currently available models of the Mitsubishi ASX, only those meeting China V emission standards are offered, with no models compliant with China VI standards. The China V emission standard is equivalent to the Euro 5 standard currently in effect in Europe, imposing stricter limits on vehicle pollutants such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China I to China IV has reduced per-vehicle pollution by 30% to 50%. The Mitsubishi ASX measures 4366mm in length, 1780mm in width, and 1640mm in height, with a wheelbase of 2670mm. It is a 5-door, 5-seater SUV equipped with a 5-speed manual transmission.
14
3
Share

How to Open the Engine Protective Cover?

To open the engine protective cover, follow these steps: 1. First, open the car door, sit in the driver's seat, and locate the engine switch lever on the left side of the driver's seat. 2. Pull the engine lever by hand until you hear a 'click' sound. 3. Check if the car engine hood has been opened. If there is a noticeable gap, it indicates that the engine hood has been successfully opened. 4. Pull the safety latch. To fully open the hood, you must first pull the safety latch. 5. Prop up the front engine cover. Pull the support rod and secure its top hook into the engine hood. After ensuring the engine hood is properly supported, you can proceed with other operations on the engine.
12
0
Share

What is Downshifting for Deceleration?

Downshifting for deceleration refers to quickly shifting from a high gear to a low gear when descending a long and steep slope, utilizing the engine braking effect of the lower gear. This method is typically employed in emergency situations such as tire blowouts or brake failure. During normal downhill driving, it is recommended to downshift in advance and achieve gradual downshifting to protect engine and transmission components. Methods for downshifting to decelerate during brake failure: 1. Manual transmission: Press the accelerator deeply to increase engine speed, downshift, press the accelerator again, then downshift further, gradually moving to lower gears; 2. Automatic transmission: Shift the gear to L or S position to maximize the engine braking effect. For dual-clutch transmissions, manual mode is generally provided, and the operation can follow the requirements for manual transmission vehicles.
8
2
Share

Why does the steering wheel suddenly become heavy?

Suddenly heavy steering wheel is caused by low tire pressure or a problem with the power steering system. You should stop and check the tire pressure. If the tire pressure is normal, it indicates a failure in the power steering system, and you should immediately go to a professional repair shop for maintenance. Cars are equipped with power steering systems, and there are three common types: mechanical hydraulic power steering system, electro-hydraulic power steering system, and electric power steering system. Both the electro-hydraulic power steering system and the mechanical hydraulic power steering system have a power steering pump and hydraulic mechanism, and both systems require the use of power steering fluid.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.