Is the validity period calculated based on the old license after adding a driving category?

1 Answers
GiselleDella
07/30/25 10:42am
After adding a driving category, the validity period's start and end dates will be displayed on the driver's license, and the validity period of the license is calculated based on these dates. There will be corresponding records on the supplementary page, including the expiration date of the probationary period. After adding a driving category, the validity period of the motor vehicle driver's license is still calculated based on the date of the initial issuance of the license. Here is additional information: Relevant regulations: According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the validity period of a motor vehicle driver's license is divided into six years, ten years, and long-term. If you already hold a motor vehicle driver's license and apply to add a permitted driving category, you must not have a record of 12 or more penalty points in the current scoring cycle and the previous scoring cycle before the application.
Was this review help?
19
1
Share
More Forum Discussions

Where is the battery level displayed on the car dashboard?

The car dashboard cannot display the battery level. You can determine the battery's status by observing the different colors of the battery's inspection eye. Some maintenance-free batteries are equipped with a charge indicator light that shows the battery's charge level or charging status: green indicates full charge, black indicates low charge, and colorless or light yellow indicates no charge. The lifespan of a car battery is not fixed and depends on daily usage habits and environmental conditions: 1. First, ensure the battery is securely installed and regularly check if the battery cables and plugs are loose, tightening them if necessary; 2. Each engine start should not exceed 5 seconds. If a second start is needed, wait 10 to 15 seconds in between; 3. After turning off the engine, minimize activities like listening to music and avoid turning on the headlights.
4
5
Share

Should the front and rear tire pressures be the same?

Tire pressures for the front and rear do not need to be identical, but the difference should not be too large. Tire pressure is a range, not an exact value. When the rear seats are fully occupied by three people and the trunk is heavily loaded, it is more appropriate for the rear tire pressure to be slightly higher than the front. Generally, a tire pressure between 2.3 and 2.5 bar is considered normal. Precautions for using tires: 1. Avoid driving over potholes at high speeds to prevent tire wear or blowouts; 2. Be mindful that tire pressure should not be too high in hot weather, as it may lead to blowouts; 3. When replacing tires, ensure they are of the same specifications and avoid changing sizes arbitrarily.
6
3
Share

Where is the anti-theft screw of Audi A4 located?

Audi A4's anti-theft screw is located on the tire, and the tool is under the trunk. Lift the trunk mat to see the cover of the spare tire, and removing it will reveal the screw. The anti-theft screw, also known as a tamper-proof screw, works by having an irregular outer diameter shape, requiring a specialized removal tool that matches the wheel to remove it. The Audi A4 is a B-class sedan manufactured by FAW-Volkswagen, with body dimensions of 4763mm in length, 1826mm in width, and 1426mm in height, and a wheelbase of 2903mm. The design of the Audi A4's door handles emphasizes ergonomic effects and complete functionality, with sensitive pressure points for easy door opening and providing an optimal grip to allow forceful door opening in case of an accident.
19
2
Share

What is the use of a vehicle certificate of conformity?

The vehicle certificate of conformity serves the following purposes: vehicle registration, license plate application, road use, insurance, transfer, and deregistration all require the vehicle certificate of conformity. The vehicle certificate of conformity is a document printed by the motor vehicle manufacturer and distributed with the vehicle, detailing the vehicle model, inspection data, and configuration information. The certificate of conformity is another important credential for a vehicle and is a mandatory document for vehicle registration. Only vehicles with a certificate of conformity meet the national requirements for motor vehicle equipment quality and related standards. Without a certificate of conformity or if the certificate cannot be obtained in time, the vehicle is considered an unregistered vehicle and is not allowed to be driven on the road.
2
1
Share

When straightening the wheel during right reverse parking, should you look at the right rearview mirror?

When straightening the wheel during right reverse parking, you should look at the right rearview mirror. Once you see the car body parallel to the parking line in the right rearview mirror, you need to immediately straighten the wheel. Before right reverse parking, you need to adjust the position of the rearview mirrors. Generally, when adjusting the vertical angle of the left rearview mirror, the sky and ground should each occupy half of the mirror. To better understand the road conditions on the side of the car, more space should be allocated to the road, so adjust the left and right angles to make the car body occupy one-fourth of the mirror. For the right rearview mirror, the sky should occupy one-fourth of the vertical angle, and the car body should also occupy one-fourth of the horizontal angle. For right reverse parking, you need to align the car 1.5-1.8 meters from the line before reversing, stop, and shift into reverse gear. When the lower edge of the left rearview mirror aligns with the stop line, you can turn the steering wheel fully to the right and continue reversing. Next, observe the distance between the rear wheel and the parking corner in the right rearview mirror. When there is a two-finger width in the mirror, you can turn the steering wheel back one full turn and continue reversing. Then, use both rearview mirrors to check if the car body is parallel to the parking lines. Finally, when the lower edge of the left rearview mirror aligns with the parking entrance line, you can press the brake and clutch to stop.
17
1
Share

Where is the fuel filter located in the Honda Fit?

The fuel filter in the Honda Fit is located inside the fuel tank, which is positioned beneath the driver's seat. The fuel filter typically uses filter paper, though some models may employ nylon cloth or polymer materials. Its primary function is to filter out impurities from the gasoline. The Honda Fit is a model under GAC Honda, with body dimensions of 4065mm in length, 1695mm in width, and 1525mm in height, and a wheelbase of 2530mm. In terms of exterior design, the Fit adopts Honda's family-style front face concept "Solid Wing," where the front grille integrates seamlessly with the headlights, highlighting a sharp and sporty look. The side profile features a distinctive and sporty double waistline design, creating a dynamic forward thrust. The taut rear design, paired with LED taillights, presents a more premium texture.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.