Is the trunk lid of the new Santana made of iron?

How to Fix a Failed DIY Touch-Up Paint Job?

Here are the remedies for a failed DIY touch-up paint job: 1. Clean the scratch: Completely remove rust, dirt, and grease from the paint surface. Start by using ultra-fine water sandpaper dipped in water to gently sand away rust spots, then thoroughly wipe clean to prevent rust from spreading. 2. Paint repair: Carefully apply masking tape above and below the scratch. This mainly prevents accidentally painting other areas or causing paint runs. Shake the touch-up pen vigorously at least 30 times to mix the paint evenly. Unscrew the cap, take out the pen, and scrape off excess paint at the bottle opening. Use the pen tip to carefully apply and fill the scratch evenly, starting with a thin coat. Wait 5 minutes for slight drying before applying the second and third coats until the painted area slightly protrudes above the surrounding normal paint. For better results, use polishing compound to level the scratch and paint surface, enhancing paint adhesion. 3. Sanding and polishing: After 3 days, remove the tape and observe the paint. If noticeably raised, use a single-edge razor blade (with caution to avoid damaging surrounding areas) to gently scrape off high paint marks. The paint may appear soft and brittle, with some touch-up paint possibly flaking off. Reapply touch-up paint, wait 2 more days, then soak 2000-grit waterproof sandpaper in soapy water for 20-30 minutes to soften it (reducing risk to original paint). Clean surface dust, secure the sandpaper with a sanding pad, and gently wet-sand the repaired area until level with surrounding paint.

19

1

Share

How many points can be deducted from a newly obtained driver's license?

Newly obtained driver's licenses can have points deducted, with a maximum of 11 points allowed. According to Article 79 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if a motor vehicle driver accumulates 12 points for road traffic safety violations during the probationary period, their driving qualification for the probationary vehicle type will be revoked. If the revoked driving qualification is not for the highest permissible vehicle type, the driving qualification for the highest permissible vehicle type shall also be revoked in accordance with the first paragraph of Article 78. Below is an introduction to driver's licenses: 1. A driver's license is a "license": Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily could lead to traffic accidents. Drivers cannot drive on the road without a license. However, for those who have already mastered safe driving techniques, the document that permits them to drive vehicles on the road is the "driver's license." This indicates that a driver's license is a "license." 2. Definition of a driver's license: Internationally, a driver's license is defined as "a document issued by the competent authority permitting the holder to drive a motor vehicle." In China, a driver's license is defined as "a legal certificate issued by the management department to individuals who are legally allowed to learn to drive motor vehicles, have studied and mastered traffic regulations and driving skills, and passed the department's examination, permitting them to drive a certain type of motor vehicle."

17

5

Share

Can You Always Drive in the Far Left Lane on the Highway?

The far left lane can be used for extended periods, but it is not recommended to occupy it for long durations. Article 78 of the new traffic law stipulates: Highways should indicate the driving speed for each lane, with the maximum speed not exceeding 120 km/h and the minimum speed not falling below 60 km/h. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h. Below are some precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes, including dedicated lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, promptly return to your appropriate lane after completing the maneuver. Avoid occupying other lanes for extended periods. Additionally, emergency lanes should not be occupied long-term without special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, leading to irreversible consequences both on local roads and highways. 3. Maintain a safe longitudinal distance between vehicles: Generally, under dry road conditions with good braking, the distance between vehicles (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, maintain at least 80 meters, and at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the distance should be doubled. 4. Observe traffic signs: Always be aware of roadside and overhead signs and markings while driving. Stay slightly to the right to avoid crossing the right lane divider, allowing sufficient lateral space for overtaking vehicles. 5. Do not arbitrarily occupy the emergency lane in case of an accident: Traffic accidents are inevitable on highways. If other vehicles cause a blockage, avoid occupying the emergency lane, which could hinder rescue operations. 6. Avoid fatigued driving and take timely breaks: Fatigued driving is extremely dangerous on highways. Fatigue reduces reaction time, making it difficult to respond correctly to sudden situations.

6

2

Share

What is the normal tire pressure for a Focus?

The standard tire pressure range for a Focus is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Ford Focus is equipped with an active tire pressure monitoring function, and the values of all tires can be displayed on the dashboard. Generally speaking, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear of the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat buildup due to excessive rolling; weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.

6

2

Share

How to Pick Up a New Car?

Here are the precautions for picking up a new car: 1. Check vehicle information: Every car has a nameplate, which clearly displays the basic information of the vehicle, especially the production date. Checking the nameplate can effectively avoid purchasing a stock car. 2. Inspect the car interior: The inspection of the car interior mainly involves the condition of physical buttons and the overall newness of the interior. Pull out the car seats to check for any signs of rust underneath, and also inspect the seat belts to determine their condition and whether they show signs of replacement.

16

1

Share

What Causes Abnormal Noise in Car Air Conditioning Blower?

Car air conditioning blower abnormal noise is caused by: 1. Dirty air filter; 2. Debris in the blower fan blades; 3. Deformation of the car air conditioning fan blades or damage to the fan motor; 4. Wear of the clutch bearing in the air conditioning pump; 5. Loose screws in the blower due to vibration. Car air conditioning, short for car air conditioning device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to an optimal state. It provides a comfortable riding environment for passengers, reduces travel fatigue, creates good working conditions for the driver, and ensures driving safety.

14

4

Share

Is the trunk lid of the new Santana made of iron?

How to Fix a Failed DIY Touch-Up Paint Job?

How many points can be deducted from a newly obtained driver's license?

Can You Always Drive in the Far Left Lane on the Highway?

What is the normal tire pressure for a Focus?

How to Pick Up a New Car?

What Causes Abnormal Noise in Car Air Conditioning Blower?

Is the Depreciation Period for Cars 5 Years or 4 Years?

How to Turn on the Rear Air Vents in the Teana?

Why does the car horn suddenly stop working on rainy days?

How to Drive an Audi A6L Automatic Transmission?