Is the Trumpchi Engine Imported or Domestically Produced?

How often should wheel balancing be performed?

Wheel balancing should be performed every 8,000 to 10,000 kilometers. The procedure for wheel balancing is as follows: 1. Install the vehicle tire on the balancing machine and secure it properly with clamps; 2. If there are old balancing weights, remove them; 3. Measure the distance from the machine to the tire rim and input the corresponding value into the machine; 4. Input additional data, including the tire size, into the machine; 5. Press the start button, the tire will begin to rotate, and once it stops, the machine will display the deviation value of the tire; 6. Add balancing weights to the tire according to the displayed value; 7. Continue testing until the machine displays 00 for both values, indicating that the wheel balancing process is complete.

6

4

Share

Where is the blower relay of the Elysee located?

The blower relay of the Elysee is located below the steering wheel, where a long relay can be found, which is the blower relay. The blower, also known as a ventilator, is a device that utilizes rotating impellers. Modern blowers are electric motors that convert electrical energy into air kinetic energy. This vehicle offers the following advantages: 1. Configuration. The Elysee is equipped with the MRN 7-inch large touchscreen navigation and entertainment system, the only and largest in its class, making it more intelligent; a hidden rear comfort ventilation system for more considerate service; 4/6 foldable rear seats for greater convenience; a PM2.5 in-car air filtration system for better health; and dual-isolation ultra-quiet dust-proof sealing for more thoughtful features. These humanized comfort configurations surpass those of its peers, providing customers with a pleasant driving experience. 2. Power. The Elysee is powered by a new EC5 1.6L CVVT technology engine that incorporates multiple advanced technologies, combining excellent power and fuel economy, with a power output of 86KW/6000rpm, the highest in its class. Citroen's master-level chassis technology is also inherited in the new Elysee, offering customers a perfect combination of reliable handling and comfortable driving. 3. Safety. The new Elysee provides customers with a comprehensive and thoughtful safety solution—the best-in-class ESC electronic stability control system, standard oversized four-wheel disc brakes, and standard EPS speed-sensitive variable electric power steering, offering customers the most abundant active safety configurations in its class.

7

4

Share

What documents are required for car registration?

Documents required for car registration include: 1. Triple copy of vehicle purchase invoice; 2. Payment receipt for vehicle purchase tax; 3. Application form for motor vehicle registration, transfer, cancellation or relocation; 4. Compulsory insurance policy; 5. Vehicle qualification certificate; 6. Original ID card and its copy, with residence permit and its copy required for non-local residents. License plates serve as identification numbers and information registration for vehicles, enabling recognition of the vehicle's registered region and facilitating access to owner details and registration information through the plate number. While the first two characters must comply with national regulations, the remaining characters can be freely selected for personalized license plates.

13

0

Share

What are the steps to replace the cabin air filter in a Ford Focus?

The steps to replace the cabin air filter in a Ford Focus are: 1. Remove the fuse box cover under the front passenger seat to access the old cabin air filter; 2. After removing the old filter, slightly compress the new filter towards the center; 3. Once installed, gently pull the filter a few times to restore its original shape; 4. Reinstall both covers to complete the replacement. Taking the 2019 Ford Focus as an example, it belongs to the compact car category with body dimensions of: length 4378mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53 liters, and trunk capacity 341 liters.

14

1

Share

What are the steps for automotive chassis sealing?

The steps for automotive chassis sealing are: 1. Thoroughly clean and dry the asphalt, oil stains, and other contaminants from the car chassis; 2. Use masking paper to cover the engine oil pan, transmission case, exhaust pipe, etc., to avoid spraying; 3. After wrapping the key parts, use a high-pressure spray gun to apply the anti-rust coating evenly on the vehicle chassis, with a thickness between 1mm to 3mm; 4. Wait for 2 to 4 hours after spraying. Chassis sealing involves spraying a highly adhesive flexible rubber resin onto the chassis to isolate it from the external environment, achieving functions such as anti-corrosion, rust prevention, and sound insulation, thereby extending the vehicle's lifespan.

5

2

Share

Which country produces the Infiniti QX50?

Infiniti QX50 is a car produced in China. It is a mid-size SUV. Taking the 2020 Infiniti QX50 as an example, its body dimensions are: length 4705mm, width 1903mm, height 1681mm, wheelbase 2798mm, fuel tank capacity 60L, and curb weight 1788kg. The 2020 Infiniti QX50 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 245PS, maximum power of 180kW, and maximum torque of 380Nm, paired with an 8-speed continuously variable transmission.

8

4

Share

Is the Trumpchi Engine Imported or Domestically Produced?

How often should wheel balancing be performed?

Where is the blower relay of the Elysee located?

What documents are required for car registration?

What are the steps to replace the cabin air filter in a Ford Focus?

What are the steps for automotive chassis sealing?

Which country produces the Infiniti QX50?

What model of tires does the Chevrolet Equinox use?

What is the Chinese name of DS cars?

What is the normal tire pressure for a regular car?

Why Can't the Transmission Gear Be Engaged?