Is the Transfer of a Used Car Troublesome?

1 Answers
VanBrantley
07/30/25 1:02am
Transferring a used car is not troublesome. Below is the relevant information for transferring a used car: Documents required for transferring a used car: Original owner's ID card, new owner's ID card, vehicle license (original/duplicate), purchase tax certificate, vehicle and vessel tax payment proof, vehicle registration certificate, vehicle criminal inspection form, insurance policy/card/invoice. All of these must be provided in original copies. Process for transferring a used car: Fill out the used vehicle sales contract, drive the vehicle directly to the transfer inspection station for inspection, photography, tracing, and license plate removal. Fill out the inspection record form. After returning to the transfer hall, take a number, queue up, and wait for your turn. The staff will confirm that the vehicle has no violations before starting the transfer process. Pay the transfer fee, go to the transfer processing window to complete the relevant procedures, and fill out the vehicle registration, transfer, and cancellation form, as well as the vehicle import registration form. After completing the transfer process, take the receipt to the payment window to pay the transfer fee. Then, choose a new license plate number and receive the new license plate, vehicle license, and registration certificate.
Was this review help?
7
5
Share
More Forum Discussions

How many kilometers can the clutch plates of a dry dual-clutch transmission last?

For general dry dual-clutch transmissions, it is recommended to replace the clutch plates approximately every 100,000 kilometers. More information about dual-clutch transmissions is as follows: 1. Dual-clutch transmissions, like manual transmissions, have clutch plates. Dual-clutch transmissions are developed based on manual transmissions. 2. Clutch plates will wear out with increased mileage, which is a normal phenomenon. When the clutch plates are severely worn, they need to be replaced. 3. There are two types of dual-clutch transmissions: dry-type transmissions and wet-type transmissions.
14
2
Share

How to Remove Car Window Tint Film?

The methods for removing car window tint film are as follows: 1. Use a utility knife to lift a corner, then slowly peel off the film; 2. For difficult areas, gently scrape the adhesive with the knife to assist in removal; 3. Finally, remove residual adhesive—using gasoline or alcohol for wiping works best. More information about car window tint film: 1. Car window tint film is a thin layer applied to the front and rear windshields, side windows, and sunroof. 2. This film reduces damage to interior items and occupants from UV rays, lowers cabin temperature through physical reflection, decreases air conditioning usage, and thus reduces fuel consumption. 3. Removing the film is labor-intensive and often yields suboptimal results, so it's recommended to have it professionally removed at a specialized tint shop.
10
1
Share

What are the differences between the Audi A6L Elegance and Dynamic models?

Audi A6L Elegance and Dynamic models differ in the following aspects: 1. The Elegance model features 225/55R18 tires for both front and rear wheels, while the Dynamic model uses 245/45R19 tires. 2. The Dynamic model comes with a sport appearance package, which is absent in the Elegance model. 3. The Elegance model has genuine leather seats, whereas the Dynamic model combines genuine leather with Alcantara materials. 4. The Elegance model includes ambient interior lighting, which the Dynamic model lacks. Here are some additional insights: 1. With the continuous advancement of shock absorption technology, the longitudinal vibration damping performance of high-end models has reached an exceptionally high level. Consequently, attention has increasingly shifted to the overall vibration comfort of the vehicle, which largely depends on the design of the front and rear axles and the chassis assembly. The development of vibration comfort in the new Audi A6L also focuses on this aspect. 2. The Audi A6L adopts a five-link front suspension design, balancing the necessary rigid connections for sportiness and comfort with low static stiffness. Among these, the hydraulic chassis damping mounts significantly enhance driving comfort, effectively reducing the sense of impact and jerkiness when passing over speed bumps and uneven road surfaces, thereby minimizing the impact on the lumbar spine.
12
2
Share

Can the Jetta VS5 use 92 gasoline?

Jetta VS5 cannot use 92 gasoline. The Jetta VS5 is equipped with a 1.4-liter turbocharged engine across all models, which requires a minimum of 95 gasoline. Generally, turbocharged engines require at least 95 gasoline. If 92 gasoline is used, the turbocharged engine is prone to knocking. Relevant information about gasoline is as follows: 1. The English name for gasoline is gasoline or gas (American English), also known as petrol (British English). It is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum, mainly used as fuel for spark-ignited internal combustion engines. 2. Gasoline with different octane ratings has different octane values, and higher-octane gasoline has higher octane values.
7
1
Share

How to Use the Tank Turn Feature on the Land Cruiser?

The method to use the tank turn feature on the Land Cruiser is as follows: 1. Shift to N gear. 2. Engage low-range four-wheel drive. 3. Shift to D gear. 4. Activate crawl mode and release the brake. 5. Turn the steering wheel to a certain angle. 6. Press the tank turn button, and control the speed with the speed button. Information about the Land Cruiser is as follows: 1. The Land Cruiser is equipped with a powerful Toyota dual VVT-i 4.0L V6 engine and a 5-speed automatic transmission, delivering a maximum output of 200 kW and a torque of 380 Nm, paired with a manual part-time four-wheel-drive system. 2. In terms of suspension: The front suspension of the FJ Land Cruiser uses a double-wishbone independent suspension to provide a certain level of driving comfort for off-roading; the rear suspension adopts a solid axle with a four-link non-independent suspension to ensure the rear wheels remain firmly on the ground at all times, tackling rough and uneven rocky roads. 3. The Land Cruiser features a professional off-road ladder frame, with up to 8 cross members installed between the two main beams to enhance the rigidity of the entire frame, ensuring no deformation of the body when traversing highly undulating rocky terrain.
17
2
Share

What engine does the Arrizo 5 have?

Arrizo 5 is equipped with a 1.5L naturally aspirated engine with the model code SQRE4G15C, which can deliver a maximum output of 116 horsepower and 143N·m of torque. Here is some extended information about the engine: 1. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, electric motors, etc. 2. The engine block is the framework that constitutes the engine and serves as the installation base for various mechanisms and systems of the engine. It houses all the main components and accessories of the engine and withstands various loads. Therefore, the engine block must have sufficient strength and rigidity. The engine block group mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.