Is the Toyota Prado the same as the Land Cruiser Prado?

How to Choose Spark Plugs?

Intuitively, the selection of spark plug material should be based on the ignition coil. For example, when using an ignition coil with four cylinder wires, the preferred spark plug material is not gold platinum but nickel alloy. If the vehicle uses individual coils without cylinder wires, the minimum material required must be enhanced platinum or even iridium. How to Determine the Quality of Spark Plugs: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug has an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, with oil creeping up.

10

1

Share

What color coolant should be added to the BMW X1?

BMW X1 should be filled with green coolant. Coolant is a liquid containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and providing year-round protection against scale and corrosion. How to replace coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with special attention to the five-way hose. Coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of coolant in this area, replace the hose or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue adding water to the reservoir to allow clean water to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir may appear slightly pinkish; continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose. Then, add another bottle of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.

13

2

Share

What is the fuel consumption of the Lynk & Co 01?

According to the data, the combined fuel consumption of the Lynk & Co 01 is 7.4L/100km. Here is the relevant introduction about the Lynk & Co 01: 1. Powertrain: Equipped with a 2.0L turbocharged 4-cylinder JLH-4G20TDJ engine, paired with an 8-speed automatic transmission. 2. Body dimensions: The length, width, and height are 4549mm, 1860mm, and 1689mm respectively. The wheelbase is 2734mm. 3. Chassis: The drivetrain is front-wheel drive, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension.

10

2

Share

What brand of antifreeze is used in the BMW 5 Series?

There is no mandatory regulation on the brand of antifreeze, as long as the same brand is used. Different brands of antifreeze may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. How to choose antifreeze: The basic indicators of antifreeze are the freezing point and boiling point. Market-available antifreeze comes in specifications such as -15°C, -25°C, -30°C, and -40°C freezing points. Generally, it is advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it may indicate low antifreeze levels, though it could also be due to excessively high engine temperature. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Inspect the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If it is below the minimum mark, it indicates a shortage of antifreeze.

17

0

Share

How to Deal with a Motorcycle Throttle That Won't Return?

Motorcycle throttles that fail to return are generally caused by issues such as stuck throttle cables or throttle grips, as well as stuck throttle valves, carburetor throttle valves, or throttle needles in the carburetor. You can check whether the throttle pedal return spring and throttle linkage return spring are broken, detached, or stuck. If there are no issues with these components, inspect the carburetor, the return condition of the throttle valve, and the return condition of the accelerator pump. Here are some solutions for a motorcycle throttle that won't return: 1. Add an auxiliary return spring at the connection point between the carburetor and the throttle cable. 2. Replace the throttle cable. 3. Inspect the carburetor area. 4. Minimize bends in the throttle cable or reduce the angles of these bends, keeping the cable as straight as possible. Removing the needle seat from the carburetor and lightly polishing it with 2000-grit sandpaper can also help the throttle cable operate more smoothly.

12

0

Share

What is the ground clearance of the X-Trail?

X-Trail's minimum ground clearance is 210mm. Here are the relevant details: 1. Definition of ground clearance: The minimum ground clearance of a vehicle is defined as the smallest distance between the vehicle's undercarriage and a level ground surface when the car is fully loaded. 2. Function of ground clearance: The chassis height data reflects a vehicle's ability to pass through complex terrain. In previous regulations, there was a certain standard for minimum ground clearance, approximately around 16cm, but this mandatory requirement no longer exists. 3. Relationship between ground clearance and performance: The smaller the ground clearance (below 110mm), the more stable the handling at high speeds, but the vehicle's off-road capability is compromised. Some modern vehicles are equipped with air suspension systems that can automatically adjust chassis height in real-time, perfectly balancing both stability and off-road performance requirements.

6

5

Share

Is the Toyota Prado the same as the Land Cruiser Prado?

How to Choose Spark Plugs?

What color coolant should be added to the BMW X1?

What is the fuel consumption of the Lynk & Co 01?

What brand of antifreeze is used in the BMW 5 Series?

How to Deal with a Motorcycle Throttle That Won't Return?

What is the ground clearance of the X-Trail?

What is the Emission Standard for 2013 Vehicles?

How to Distinguish Good and Bad Gasoline?

Can the old inspection sticker be removed when a new one is issued?

What maintenance is required for a sedan at 40,000 kilometers?