Is the Toyota A25D engine imported?

1 Answers
LaTanner
07/29/25 4:25pm
Toyota A25A engine is Toyota's TANG 2.5 engine, which is originally imported from Japan. Among Toyota's models, the Camry 2.5L uses the A25A engine, with a maximum power of 154KW, a maximum torque of 250Nm, and a maximum horsepower of 209. For daily maintenance of the Toyota A25A engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
6
4
Share
More Forum Discussions

How to solve the high water temperature warning of Audi Q5?

Audi Q5's high water temperature warning solutions: 1. Check if the coolant level in the auxiliary tank is too low, then inspect whether there are any leaks in the hoses or radiator. After adding coolant, observe if the situation returns to normal; 2. If the high water temperature warning persists, check if the radiator fan operates normally, and whether there are any abnormalities in the water temperature sensor, dashboard, or circuits. The Audi Q5 is a mid-size SUV launched by FAW-Volkswagen Audi, with dimensions of 4629mm in length, 1898mm in width, and 1655mm in height, and a wheelbase of 2807mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 169kw, and paired with an 8-speed automatic manual transmission.
8
3
Share

What are the symptoms of a faulty alternator tensioner pulley?

Generator tensioner pulley failure manifests as sudden increase in engine noise during rapid acceleration (especially around 1500 RPM), engine timing chain skipping teeth, ignition and valve timing disorders, engine vibration, and difficulty starting (severe cases may prevent starting altogether). When these symptoms occur, the tensioner pulley should be inspected for damage. The tensioner pulley is a wearable automotive component - prolonged belt usage can cause stretching, though some tensioners automatically adjust belt tension. Additionally, proper tensioner pulley function ensures smoother vehicle operation, reduced noise, and effective prevention of belt slippage.
11
0
Share

What car has the M logo?

The M logo represents Maybach. Originally, Maybach was an independent automobile brand, first established in the 1920s. The double M stands for Maybach automobiles. Currently, Maybach is a sub-brand under Mercedes-Benz, with the double M symbolizing Maybach manufacturing. Taking the Maybach S as an example: the car's body dimensions are 5466mm in length, 1899mm in width, and 1498mm in height, with a wheelbase of 3365mm. The Maybach S is equipped with three types of engines: a 3.0-liter twin-turbocharged engine, a 4.0-liter twin-turbocharged engine, and a 6.0-liter twin-turbocharged engine. Its suspension system is identical to that of the Mercedes-Benz S-Class, featuring double-wishbone independent suspension for both the front and rear.
15
4
Share

What are the installation steps for the timing belt of the Volvo S80L?

The installation steps for the timing belt of the Volvo S80L are as follows: 1.; 2.; 3.; 4. Fit the timing belt assembly onto each transmission pulley in sequence as required, ensuring the marks on the belt align with those on the pulleys, the timing arrow on the belt matches the engine's rotation direction, the outer edge of the belt is flush with the outer edge of the camshaft, and the belt's end face remains in the same plane. 5. Install the tensioner assembly onto the pulley housing, securing it with a hexagonal flange positioning bolt to ensure the tensioner assembly moves freely. After installation, make sure there are no extra or misaligned teeth between the camshaft timing pulley and the fuel injection pump timing pulley, or between the crankshaft pulley and the camshaft pulley. Avoid bending the timing belt assembly during the installation process.
20
3
Share

Is the Cruze a four-cylinder engine?

The Cruze is not a four-cylinder engine, but a three-cylinder engine. The entry-level model of the Cruze is equipped with a 1.0T engine with a maximum power of 125 horsepower. The high-end model of the Cruze is equipped with a three-cylinder 1.3T engine, which has a maximum power of 163 horsepower. Depending on the model, it is paired with a manual, 6AT, or 7-speed dual-clutch transmission. The Cruze's 1.0-liter turbocharged three-cylinder engine has a maximum power of 92kw and a maximum torque of 170 Nm. This engine can deliver maximum power at 5,600 rpm and maximum torque between 2,000 and 4,000 rpm. It is also equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
15
5
Share

What is the difference between semi-automatic block and automatic block?

The difference between automatic block and semi-automatic block is that the automatic block does not require manual operation, while the semi-automatic block requires manual block handling procedures. Here are some introductions about automatic block and semi-automatic block: 1. Semi-automatic block: This type of block requires manual block handling procedures. Trains depart based on the display of the departure signal, but after the train departs, the departure signal can automatically close, hence it is called semi-automatic block. 2. Automatic block: Based on the train operation and block section conditions, the signal can automatically change its display. Trains run according to the signal display, and this block method is entirely automatic, hence it is called automatic block. The automatic block is a device that automatically completes the block task for running trains.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.