Is the Toyota A25A engine imported?

1 Answers
DeLeonardo
07/30/25 6:15am
A25A engine is Toyota's TANG 2.5 engine, which is originally imported from Japan. Among Toyota's models, the Camry 2.5L uses the A25A engine, with a maximum power of 154KW, a maximum torque of 250Nm, and a maximum horsepower of 209. The following maintenance methods can be used for the A25A engine in daily use: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and the usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance will deteriorate, causing various problems for the engine. To avoid failures, the oil should be changed regularly according to the usage conditions, and the oil level should be kept moderate; When the oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to pass through the bypass valve and bring dirt back to the lubrication parts, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it suspends in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
Was this review help?
8
4
Share
More Forum Discussions

Does a Damaged Catalytic Converter Affect Engine Performance?

A damaged catalytic converter does affect engine performance. The catalytic converter is a component installed in the front section of the vehicle's exhaust pipe, designed to purify exhaust gases. After the vehicle's exhaust is emitted, it passes through the catalytic converter, which reduces the content of harmful substances in the exhaust. If the catalytic converter is damaged, it can cause the vehicle's emissions to exceed standards, affecting the annual inspection. There are oxygen sensors both before and after the catalytic converter. The role of the oxygen sensor is crucial. The oxygen sensor located after the catalytic converter is primarily used to detect whether the catalytic converter is damaged. If the data transmitted to the ECU by the front and rear oxygen sensors is identical, it indicates that the catalytic converter is damaged and needs to be replaced immediately.
16
4
Share

How to Steer the Wheel When Making a U-turn in Subject Three?

When making a U-turn in Subject Three, you can drive close to the right side of the road near the U-turn location, slow down, and shift to a lower gear while turning on the left turn signal. Here are some additional details: 1. If you find that the U-turn operation will not affect the traffic in the lane, make a decisive left turn. 2. When the front of the car is about to cross the left edge of the road, immediately straighten the wheel, brake, and quickly turn the steering wheel two full turns to the right. 3. Honk the horn and observe the traffic behind the car and on both sides of the road. Once you confirm it is safe, immediately shift into reverse gear and start backing up. 4. When you determine there is enough space to complete the left U-turn, stop immediately, quickly shift into first gear, turn the steering wheel all the way to the left, and complete the U-turn.
11
2
Share

What does 'ETC without OBU' mean?

ETC without OBU means that the vehicle is not equipped with the onboard unit device required for ETC, which will result in the failure of highway toll deductions. In the ETC system, the OBU is placed in the vehicle, and roadside units (RSUs) are installed along the road. They communicate with each other via microwave signals. When a vehicle passes an RSU at high speed, the onboard unit and the roadside unit communicate via microwave to verify authenticity, identify the vehicle type, calculate the toll rate, and deduct the toll. The ETC system uses automatic vehicle identification technology to establish wireless data communication between the vehicle and the toll station, enabling automatic vehicle recognition and the exchange of relevant toll data. It employs computer networks to process toll data, achieving a fully automated electronic toll collection system without the need for vehicles to stop or for toll booths to be set up.
17
0
Share

What level of car is the BMW X2?

The BMW X2 is a Class A car, belonging to the compact SUV category. The exterior design of this car is very attractive, with body dimensions of 4379mm in length, 1824mm in width, and 1555mm in height, and a wheelbase of 2670mm. The BMW X2 fully inherits the design style of the concept car in its appearance, featuring a prominent silver front lip and the first-ever large trapezoidal dual kidney grille seen in BMW models. The car is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power of 103 kW and a maximum torque of 220 Nm, paired with a 7-speed dual-clutch transmission. The 2.0-liter turbocharged engine has a maximum power of 141 kW and a maximum torque of 280 Nm, also paired with a 7-speed dual-clutch transmission.
16
1
Share

How to Improve the Power of Accord 2.0?

Methods to improve the power of Accord 2.0: You can install a turbocharger to increase power. The main function of a turbocharger is to increase the engine's air intake, thereby enhancing the engine's power and torque, making the car more powerful. After installing a turbocharger, the maximum power of an engine can increase by 40% or even more compared to when it is not equipped with one. This means that the same engine can output greater power after being turbocharged. Taking the 2018 Accord as an example, its body dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. Its body design creates a low stance, giving it a somewhat sporty feel.
7
2
Share

What engine does the Subaru BRZ use?

The Subaru BRZ is equipped with a naturally aspirated engine with the code name FA20 and a displacement of 2.0 liters. This engine was jointly developed by Subaru and Toyota, delivering a maximum horsepower of 200 hp, a maximum power output of 147 kW, and a peak torque of 205 Nm. The Subaru BRZ has body dimensions of 4240mm in length, 1775mm in width, and 1285mm in height, with a wheelbase of 2570mm. The car features a horizontally opposed engine layout and a front-engine, rear-wheel-drive configuration. It is equipped with a front MacPherson strut independent suspension and a rear double-wishbone suspension. The new model boasts a more sporty exterior design and comes with 225/40ZR18 tires, while the chassis has been reinforced for greater durability.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.