Is the Toyota 86 Imported?

What are the reasons for the high idle speed when the car is warm?

The reasons for the high idle speed when the car is warm are: excessive fuel injection, excessive air intake during idle, and incorrect engine control signals. The method to warm up the car is: after starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature, then you can drive. Solutions for high idle speed: 1. Adjust or replace the throttle position sensor; 2. Clean or replace the idle control valve, and use a decoder to perform a basic idle speed setting; 3. Find the leak, reseal or replace the relevant components; 4. Check the timing marks and readjust the valve timing according to the standard; 5. Clean and check the fuel injection quantity of each injector and ensure there is no blockage or leakage; 6. Replace the three-way catalytic converter; 7. Remove carbon deposits on the EGR valve or replace the EGR valve.

2

4

Share

Reasons for Occasional Shaking at Idle Speed?

Possible causes of car shaking at idle include: faulty spark plugs or ignition coils; incorrect valve timing; uneven cylinder compression; poor valve sealing leading to air leakage; inadequate fuel pressure; clogged fuel injectors; leaks between the cooling system and cylinders; malfunctioning mass airflow sensor. Below is a classification of unstable idle conditions: 1. How to Observe Unstable Idle ① Observe the degree of engine block shaking, or check the movement of the oil dipstick handle—a stable handle appears clear, while a shaking one may appear doubled. ② Monitor the engine tachometer or read data blocks; the RPM fluctuates around the expected idle value or shakes violently on one side. The expected idle values in the program include standard idle, load idle (with lights on, automatic transmission engaged, etc.), A/C idle, and warm-up idle. ③ Start the engine while stationary and feel the severe shaking of the vehicle from the seat. 2. Classification by Pattern ① Rhythmic instability when the engine is cold (coolant temperature below 50°C). ② Rhythmic instability when the engine is hot (coolant temperature above 50°C). ③ Irregular severe shaking once or twice. 3. Classification by Severity ① Normal: shaking within ±10 RPM of the expected idle value. ② Moderate instability: shaking within ±20 RPM of the expected idle value. ③ Severe instability: shaking exceeding ±20 RPM of the expected idle value. ④ Violent shaking on one side of the expected idle value. 4. Classification by Cause ① Direct causes: mechanical components being dirty, worn, or improperly installed, leading to variations in individual cylinder power output, resulting in imbalance and unstable idle. ② Indirect causes: abnormalities in the engine's electronic control system causing poor combustion of the air-fuel mixture, making it difficult to balance cylinder power and leading to unstable idle. 5. Classification by Fault System ① Intake system; ② Fuel system; ③ Ignition system; ④ Engine.

12

3

Share

What is the fuel consumption of the Hyundai Mistra?

The Hyundai Mistra has 5 models currently on sale. Among them, the 2021 1.8L CVT LUX Premium Edition, GLS Leading Edition, and GLX Elite Edition, equipped with a 143 horsepower engine, have an NEDC fuel consumption of 5.3L per 100km. The 2021 270TGDi DCT TOP Flagship Edition and LUX Premium Edition, equipped with a 170 horsepower engine, also have an NEDC fuel consumption of 5.3L per 100km. The fuel tank capacity is the same for all Hyundai Mistra models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 143 horsepower engine and an NEDC fuel consumption of 5.3L per 100km, the fuel tank capacity is 52L, allowing a distance of 52/5.3*100=981km on a full tank. For models equipped with a 170 horsepower engine and an NEDC fuel consumption of 5.3L per 100km, the fuel tank capacity is also 52L, allowing a distance of 52/5.3*100=981km on a full tank. Automobile fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The vehicle itself: Vehicles with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement typically means greater power output, requiring more gasoline for combustion. Heavier vehicles also consume more fuel as greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts does not atomize easily, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

18

0

Share

What are the specifications and models of the Tiguan tires?

Tiguan tires come in two specifications: 235/55R18 and 235/50R19. In 235/55R18, the first number 235 represents the tire width of 235MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. In 235/50R19, the first number 235 represents the tire width of 235MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 19 represents the rim diameter of 19 inches. The letter "R" in the middle stands for radial tire. The Tiguan uses tires from brands such as Michelin, Hankook, and Dunlop, featuring a five-spoke radial black and silver dual-tone wheel design, with the spare tire being non-full size. If you want to replace the tires yourself, you can follow the steps below: Retrieve the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not completely loosen them, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires also have the following common data marked on them: Tire cord material: indicated by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire, facilitating practical use, such as "Standard rim 5.01F".

10

4

Share

Why is ETC not recognized?

ETC may not be recognized due to reasons such as excessive vehicle speed causing unsuccessful information reading, metal film on the windshield affecting signal transmission, improperly inserted card, incorrect installation position, OBU device malfunction, dead battery, or abnormal card status. ETC is an Electronic Toll Collection system that uses automatic vehicle identification technology to establish wireless data communication between the vehicle and the toll station, enabling automatic vehicle sensing and exchange of relevant toll data. ETC employs computer networks to process toll data, achieving a fully automatic electronic toll collection system without the need for stopping or toll booths.

7

1

Share

What suspension does the Ford Mustang use?

Ford Mustang uses MacPherson independent suspension in the front and multi-link independent suspension in the rear, which is a common suspension combination. MacPherson suspension is widely used due to its simple structure, compact size, and low cost. It features only one L-shaped control arm and does not occupy engine compartment space. With independent suspension, there is no connection between the two wheels on the same axle, so there is no interference between them. In 1962, Ford developed the first concept car of the Mustang, the Mustang I, which was a mid-engine two-seater sports car.

15

5

Share

Is the Toyota 86 Imported?

What are the reasons for the high idle speed when the car is warm?

Reasons for Occasional Shaking at Idle Speed?

What is the fuel consumption of the Hyundai Mistra?

What are the specifications and models of the Tiguan tires?

Why is ETC not recognized?

What suspension does the Ford Mustang use?

How to Remove ISOFIX Hard Connectors?

Is the Ferrari 488 turbocharged?

Can You Drive on the Highway with a Spare Tire?

What is the method for replacing the air conditioning filter in the Mistra?