Is the Tourneo a seven-seater?

What does the R gear in a car mean?

R gear refers to the reverse gear, which is used when the car needs to reverse. R stands for Reverse, indicating that the vehicle is in reverse mode. When the gear lever is placed in this position, the hydraulic system's reverse oil circuit is engaged, causing the drive wheels to rotate in reverse, enabling the car to move backward. Typically, you need to press the safety button on the gear lever before moving it to the "R" position. Note: Do not force the gear lever into the "R" position when the vehicle has not come to a complete stop, as this can damage the transmission. For vehicles equipped with an automatic transmission, you must first press the brake pedal and then press the safety button on the gear selector or push down the gear lever to engage or disengage the R gear. The R gear can be engaged from the P (Park) or N (Neutral) positions, but switching between D (Drive) and R requires passing through the N position. Specifically, the D gear must be shifted to N before engaging R, which helps reduce the impact of reverse oil flow in the transmission during gear changes. For vehicles with a manual transmission, you must first bring the car to a complete stop, then press the clutch and brake pedals, shift the gear lever into the R position, and finally perform a semi-clutch operation with slight throttle input. The R gear is one of the essential working gears in a car. Proper use can extend the lifespan of the transmission and help prevent accidents.

17

1

Share

Can I use the manual toll lane if my car has ETC?

If your car is equipped with ETC, you can use the manual toll lane, but you need to remove the ETC card and hand it to the toll collector. When using the manual lane, be sure to stop, take the card out of the OBU device, and let the toll collector swipe it to obtain exit information. When passing through the toll station, proceed in an orderly manner and avoid cutting in line to prevent congestion in the manual lane. ETC is a non-stop electronic toll collection system, also known as an automatic road toll system. It is a road toll method specifically designed for toll roads, commonly seen on highways, bridges or tunnels with toll policies, and certain sections of urban centers to alleviate traffic congestion. ETC Deduction Principles: There will be one or more ETC lanes on highways. Through microwave short-range communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used for backend settlement with banks. This allows vehicles to pay tolls without stopping at road or bridge toll stations, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line. Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass toll stations without stopping. Cost-saving: Reduces wear and tear, fuel consumption, and vehicle start-up and braking frequency. Users also enjoy a 5% discount on toll fees. Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation cards will be widely used in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." The plan also set a target of "50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC usage for trucks and explore deeper integration of ETC systems with smart transportation developments such as vehicle-to-vehicle communication and vehicle-to-road coordination. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC. ETC Usage Precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of at least 10 meters to prevent accidental toll payment for the vehicle in front due to ETC device failure or lack of ETC equipment. The recognition speed for ETC lanes is 20 km/h. Driving too fast may result in failure to read vehicle device information and toll deduction failure. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will render the tag invalid. It can be taken to the bank where the ETC card was issued or a highway service center for inspection. If the detachment or loosening is not due to human interference, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause toll deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pay with cash or card. Thick windshields may cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.

2

1

Share

Is running a red light captured by front or rear cameras?

Electronic cameras capture three photos to determine a red light violation. The first photo shows the vehicle crossing the stop line at the intersection, including the red traffic light and license plate number; the second photo shows the vehicle completely crossing the stop line, also including the red light and license plate; the third photo shows the vehicle continuing to move, mainly by comparing the position change from the second photo, including the red light and license plate. Capturing these three photos confirms a red light violation. According to the Road Traffic Safety Law, running a red light is clearly defined. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light prohibits passage, a green light permits passage, and a yellow light serves as a warning. Driving through an intersection during a red light constitutes a traffic violation. Here are some tips to avoid running a red light: Check arrow signals first, then circular signals: Currently, there are two types of traffic lights: arrow signals and circular signals. When arrow signals are present, drivers should first observe the arrow light and then the circular light to avoid violations. Note: At a circular red light, right turns are permitted unless prohibited by signage. However, if the right-turn arrow is red, turning right is prohibited and will be penalized as a red light violation. Brake in time: When the light turns red, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, but the rear wheels follow, the electronic camera will capture it, resulting in a penalty. If the front wheels have just crossed the stop line when the light turns red, wait for the next green light before proceeding. Monitor the green light countdown: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown, and the vehicle is close to the intersection at high speed, it may proceed to avoid sudden braking. If the vehicle is far from the intersection or moving slowly, brake immediately to avoid a violation. Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without separate pedestrian or non-motorized vehicle signals, pedestrians and non-motorized vehicles must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not penalized in the following situations: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by traffic cameras, manual review will exclude the violation. Even if recorded, drivers can appeal to traffic authorities. Extreme weather: If visibility is too low for even electronic cameras to clearly identify the traffic light, violations due to mistaken red light running will not be penalized. Emergencies: Transporting a critically ill patient to the hospital may involve multiple red light violations. After delivery, the driver can present hospital or patient documentation to traffic authorities for verification and penalty removal. If possible, calling an ambulance is recommended to avoid accidents. Police direction: During peak hours, traffic officers may direct vehicles at key intersections. Drivers must follow their hand signals. Traffic authorities clarify that under the Regulations for the Implementation of the Road Traffic Safety Law, vehicles that have crossed the stop line when the yellow light flashes may continue. However, accelerating through a yellow light may still be penalized as a red light violation if captured.

4

0

Share

What does Toyota TRC OFF mean?

TRC OFF is read separately. TRC stands for Traction Control System, and OFF means off. Combined, it means the Traction Control System is turned off. Here is more information about TRC OFF: 1. If TRC OFF appears, it is because the TRC button was accidentally turned off. If it is not turned off, it means there is a problem with the Traction Control System and it cannot function properly. 2. Normally, pressing the button once turns off TRC, but when the vehicle accelerates, TRC will automatically restart. If the button is pressed for more than 3 seconds, the TRC system is completely turned off and will not automatically recover.

17

2

Share

What problems can occur if the car's oil cap is not covered?

Here are the problems that can occur if the car's oil cap is not covered: 1. Problem one: The engine noise will increase. 2. Problem two: The oil will be splashed out, dirtying the engine and hood. 3. Problem three: The crankcase forced ventilation system will fail, and the oil will be sucked into the throttle, then enter the cylinders, affecting power, increasing fuel consumption, and increasing carbon deposits. 4. Problem four: Dirt can enter through the oil filler port. 5. Problem five: As the oil decreases and dirt enters, it will gradually increase engine wear.

19

3

Share

How Does Car Seat Ventilation Work?

Car seat ventilation works by designers using fans to inject air into the seat, which then flows out through small holes on the seat surface, achieving the ventilation function. Here are the details: Seat ventilation is achieved by adding fans to the back of the seat cushion and backrest foam. The fans draw in air and direct it to the ventilation layer. The airflow then permeates upward through the ventilation layer, passes through the heating pad, and flows to the surface of the seat cover (the seat cover is made of perforated leather). This allows passengers to use the ventilation function to dissipate sweat from the hips and back in hot weather, providing comfort.

1

Share

Is the Tourneo a seven-seater?

What does the R gear in a car mean?

Can I use the manual toll lane if my car has ETC?

Is running a red light captured by front or rear cameras?

What does Toyota TRC OFF mean?

What problems can occur if the car's oil cap is not covered?

How Does Car Seat Ventilation Work?

How to turn on the PCS pre-collision system in the Leiling?

What Maintenance is Needed at 60,000 Kilometers?

Is the Hongqi HS5 compliant with China 6 emission standards?

What causes the Santana sunroof to open by itself?