···
Log in / Register

Is the Touareg from SAIC or FAW?

2 Answers
Millie
07/29/25 3:58pm

The Touareg is an imported vehicle and does not belong to either SAIC or FAW. Here are the relevant details: 1. Touareg: The Touareg is a German Volkswagen-produced SUV. The name 'Touareg' comes from the Tuareg people, who live around the Sahara Desert. Volkswagen has two SUVs: the Tiguan and the Touareg. The Tiguan is produced by Shanghai Volkswagen, is relatively smaller, and priced around 200,000 RMB. The Touareg, on the other hand, is an imported vehicle, much larger with a more rounded front end, and starts at 600,000 RMB. 2. Performance: The Touareg's off-road performance can only be described as 'excellent.' It features a double-wishbone suspension at both the front and rear, ensuring maximum tire contact with the ground. It also uses electronically controlled air suspension, allowing the suspension to automatically adjust its travel based on individual wheel conditions, even on highly uneven terrain. As a result, the ground clearance can vary from 160mm to 300mm.

Was this review help?
9
1
Share
AbigailMarie
08/15/25 4:02am

As a fan of German cars, I clearly remember that the Touareg has always been a pure imported model from Volkswagen. It was developed and produced in Wolfsburg, Germany, and has no connection with SAIC or FAW. The ones we buy domestically are all introduced through Volkswagen (China), and the configurations are quite generous. For example, the 2023 model comes standard with air suspension and full-time four-wheel drive. When it comes to joint-venture domestic Volkswagen SUVs, SAIC has the Tiguan and Teramont, while FAW has the Talagon and Tayron, but they are not part of the same production system as the Touareg.

Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the reason for the car displaying 'Check Engine System'?

When a car displays 'Check Engine System', it is typically due to engine stalling faults or idle speed malfunctions. Below are detailed explanations of the specific causes: Engine Stalling Fault: During engine operation, if the speed fluctuates erratically, this phenomenon is known as engine stalling. The causes of such erratic speed fluctuations can include faults in the fuel injection system, ignition control system, or even the intake system. Idle Speed Malfunction: When the engine operates normally at medium to high speeds but exhibits unstable idle speed or even stalls at idle or near-idle speeds, this is usually caused by issues in the intake system or fuel injection control system. Occasionally, mechanical faults in the engine can also lead to poor idle performance.
9
4
Share

Which Volkswagen model is the coupe?

Volkswagen's coupe model is the Lamando. Below is an introduction to the exterior and configuration of the Volkswagen Lamando coupe: Exterior: The front features a diving horizontal design with two chrome strips on the upper grille, seamlessly connected to the chrome headlight brows. The front bumper, paired with the lower grille, extends horizontally to both sides, creating a natural and impactful look. Configuration: Equipped with the all-new EA888 TSI engine, a perfect TSI engine that innovatively integrates turbocharging technology, direct fuel injection, and variable valve timing. It maximizes energy efficiency, delivers high-performance power output, and ensures ultra-low fuel consumption.
13
3
Share

How many kilograms of car fire extinguisher are needed?

Car fire extinguishers generally require about three kilograms, which is approximately six pounds. The following are precautions for using car fire extinguishers: For initial fires: Fire extinguishers can only be used to put out initial fires. When you notice smoke or unusual odors from your car, you should use the fire extinguisher promptly. Aim at the base of the flame: When using the fire extinguisher, do not spray it at the surface of the flame. Instead, aim it at the base of the flame and ensure the fire is completely extinguished before moving the extinguisher away. Locate the source of the fire: Open the engine hood promptly and identify the exact location of the fire as quickly as possible.
15
5
Share

What is ect2nd Toyota for?

ect2nd Toyota refers to the second-gear start mode, which is available on many Toyota SUVs. First gear provides higher torque, making it prone to wheel spin on slippery surfaces during acceleration. To prevent this, Toyota introduced the second-gear start mode, reducing the likelihood of wheel slip. Below is an introduction to the S mode: 1. Overview: It keeps the engine at higher RPMs for extended periods, allowing the vehicle to maintain low-gear, high-RPM operation for better torque output and acceleration. 2. Precautions: Since S mode only delays gear shifts without altering other operational parameters, it increases transmission load and temperature in the short term, leading to accelerated wear. Therefore, avoid prolonged use of S mode.
10
1
Share

Reasons Why a Gasoline Engine Won't Start

Gasoline engine failure to start is caused by carburetor blockage, impure gasoline, or severe carbon buildup. Below are detailed explanations of these causes: Carburetor Blockage: Clean using compressed air and CarPro cleaner. Impure Gasoline: If the gasoline is impure or contains water or other impurities in the fuel tank, the engine may start at idle but speed becomes unstable when accelerating, and stalls with larger throttle openings. Clean the fuel tank and replace with genuine 93-octane gasoline. Check if the kill switch is in the ON position and verify the fuel tank switch is open. Severe Carbon Buildup: Severe carbon deposits on pistons and cylinders lead to poor compression. A complete disassembly and thorough cleaning is required.
7
0
Share

What is the standard for left and right adjustment of car headlights?

The standard for left and right adjustment of car headlights is that the low beam cutoff line must be aligned horizontally. The following is an introduction to the methods and precautions for adjusting headlights: Adjustment method: The headlight height adjustment switch uses a roller for adjustment, with numbered gears marked on the roller. The numbers indicate the height of the headlights—the higher the number, the higher the headlight position. Precautions: The height of the car headlight beam is crucial, and correct adjustment is very important. The directional height of the beam not only affects the actual illumination effect but also has a significant impact on the driving safety of both your own and other vehicles. If the car headlight beam is too high, it will not illuminate the ground clearly; if it is too low, the illumination distance will be short.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.