Is the Tiida compliant with China 6 emission standards?

1 Answers
MarianaRose
07/29/25 7:46pm
Nissan Tiida has models that meet the China 6 standards. China 6 refers to the standards established to implement the Environmental Protection Law and the Air Pollution Prevention and Control Law, aiming to prevent and control the environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. Below is a partial introduction to this vehicle: 1. The Tiida is a car produced by Dongfeng Nissan Passenger Vehicle Company. The dimensions of this car are 4250mm in length, 1695mm in width, and 1535mm in height, with a wheelbase of 2700mm. 2. The Tiida's engine utilizes technologies such as variable valve timing and double overhead camshafts, with an all-aluminum inline four-cylinder configuration, all of which contribute to the car's exceptional power performance.
Was this review help?
5
0
Share
More Forum Discussions

Is the Trumpchi GS8 a four-wheel drive vehicle?

Trumpchi GS8 has a four-wheel drive version. The four-wheel drive model is equipped with an on-demand four-wheel drive system. Relevant information is as follows: 1. The Trumpchi GS8 is a mid-size SUV. 2. The Trumpchi GS8 is equipped with a 2.0-liter turbocharged engine. This engine has a maximum power of 185kW, a maximum torque of 390 Nm, a maximum power speed of 5250 rpm, and a maximum torque speed ranging from 1750 to 4000 rpm. This engine is equipped with DCVVT technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with a 6-speed automatic transmission. 3. The front suspension of the Trumpchi GS8 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
13
1
Share

What is the battery model for Kia K2?

Kia K2 battery model is 6-QW-45MF, with a rated voltage of 12V and a rated current of 45AH. More information about the battery is as follows: 1. The battery life of Kia K2 is two to three years, and the battery should be checked every two years. Failure to replace it in time may cause the car to suddenly fail to start. 2. The method for replacing the car battery is as follows: (1) First, open the battery compartment, and you will see a fixed bar on top of the battery. Use an 8-size wrench to loosen and remove it. (2) You will see icons indicating the positive and negative terminals. Remove the positive terminal first, then the negative one. (3) Finally, after placing the new battery in position, follow the steps in reverse order: first secure the fixed bar into the groove below, then tighten it to complete the installation.
19
3
Share

Is a U-turn allowed where left turns are permitted?

U-turns are allowed where left turns are permitted. Vehicles can make a U-turn at intersections where left turns are allowed and there are no signs or markings prohibiting U-turns. Precautions when making a U-turn are as follows: Vehicles should proceed according to the left-turn signal without affecting the normal movement of other vehicles. If making a U-turn at an intersection with a left-turn waiting area, you can first enter the left-turn waiting area when the straight signal is green and wait until the left-turn signal turns green before making the U-turn. Other situations where U-turns are permitted include: Presence of U-turn signals or signs: When there is a U-turn signal at an intersection, a U-turn can be made when the U-turn signal is green. If there is a U-turn sign at the intersection or a U-turn marking on the lane, a U-turn can be made while ensuring the safety of yourself and others. U-turns are allowed at dashed lines: Whether it's a white or yellow dashed line, U-turns are permitted. For double yellow lines where one side is dashed and the other is solid, check if your side is the dashed line. If it is, you can make a U-turn safely; if it's solid, U-turns are not allowed. If encountering such lines at an intersection, you can make a U-turn on the dashed side but must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns are allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn there. When the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the zebra crossing before making a U-turn, and must not cross the solid line or the zebra crossing to make a U-turn.
13
4
Share

Does the Panamera have a 5-seater version?

The Panamera does have a 5-seater version, which is the estate variant of the Panamera. Here is more information about the Panamera: 1. Safety features: knee airbags, rear child seat anchors, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, electronic stability control, lane change assist, lane departure warning system, lane keeping assist system, night vision system. 2. Assistance features: The Panamera estate version comes with assistance features such as rearview camera, cruise control, driving mode selection, automatic parking, engine start-stop technology, auto hold, hill start assist, suspension damping adjustment, suspension height adjustment, air suspension, variable steering ratio.
10
2
Share

What is ABS?

ABS, short for Anti-lock Braking System, functions to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling while slipping (with a slip ratio of around 20%). This ensures that the adhesion between the wheels and the road surface remains at its maximum. The ABS sensor is located on the inner side of the vehicle's tires and can be seen when the car is lifted. The ABS system mainly consists of four components: wheel speed sensor, electronic control unit (ECU), hydraulic unit, and ABS warning light. The wheel speed sensor detects the motion state of the wheels, emitting sinusoidal electronic pulse AC signals. These signals are then processed by a modulator, converted into digital signals, and transmitted to the electronic control unit. The electronic central control unit (ECU) receives input signals from the wheel speed sensors, calculates the wheel speed, vehicle speed, and slip ratio based on these parameters, and determines the wheel state according to the slip ratio. It then issues control commands to the hydraulic unit. The hydraulic unit adjusts the pressure in the brake lines according to the control commands, with the adjustment process including pressure holding, pressure increase, and pressure decrease. The ABS warning light alerts the driver to any system malfunctions. If the ABS warning light is on, it is advisable not to continue driving. This is because an illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to decelerate or adjust the vehicle's trajectory, posing significant safety risks.
5
1
Share

How to Turn Off the One-Button Start-Stop Function in Audi A4L?

Audi A4L one-button start-stop deactivation method: 1. The automatic start-stop switch in the Audi A4L is located in the button control area on the center console, featuring a mechanical button. To deactivate it, simply press the corresponding button. 2. The one-button start-stop function will turn off the engine. Unless equipped with an automatic parking function, you must keep your foot on the brake during this process. Releasing the brake pedal will immediately restart the engine. Note: The one-button start-stop function will not operate when the battery charge is below 60%, the outside temperature is below 5℃ in winter, or the interior temperature is below 20℃.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.