Is the Theory Course for Subject 1 Mandatory?

2 Answers
LeBrandon
07/29/25 4:58pm
It depends on local regulations. Subject 1 is a theoretical knowledge test and is very important. According to regulations, it is mandatory to attend training courses organized by the traffic police department. These courses are taught by professionals from the traffic police department, which helps in gaining a solid grasp of the knowledge. This way, when encountering situations while driving in the future, you will know how to handle them. If you have any questions, you can also ask during the course, which is beneficial for passing the exam more effectively. More learning methods are introduced as follows: 1. Training courses: Attending training courses at driving schools can also provide some help in passing the exam. 2. At home: Self-study at home is also a good method. If you lack confidence, you can practice more questions at home. 3. General summary: In general, if the regulations require attending training courses organized by the traffic police department, you should study seriously. If there are no such regulations locally, it is still better to attend training courses at driving schools. Although self-study at home can also help you pass the exam, the knowledge may not be deeply ingrained, and you might feel at a loss when encountering situations while driving in the future.
Was this review help?
8
2
Share
GideonDella
08/14/25 6:58am
I just got my driver's license not long ago, and I have a deep impression of the theoretical course for Subject One. According to regulations, you must complete 12 hours of offline training before taking the exam, with facial recognition check-in for each session. Our driving school divided the classes over four weekends. The content wasn't just about answering questions—the instructor also explained traffic rules using real accident cases, covering details easily overlooked in self-study, such as how to read road markings and emergency avoidance principles. Once, the teacher demonstrated a 3D simulation of a drunk driving accident, and the visual impact was much stronger than reading a book. Although some cities allow online learning, most regions still mandate in-person instruction, as safe driving is not something to take lightly. The most direct consequence of skipping the theory classes is being unable to schedule the exam—I personally witnessed two self-taught students getting stuck at the vehicle management office.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

How to Solve the Engine Immobilizer Authentication Failure Issue on Baojun 510?

Fellow car owners should first check their car keys. The remote key fob contains a dedicated module specifically for engine starting. Simply pry open the casing, remove the old battery and replace it with a new one.
8
1
Share

How to Remove the Fuel Pump on a Buick Excelle?

First remove the rear seat to expose a black metal cover secured by four screws. Unscrew these to reveal the fuel pump. Disconnect all wiring connections, then use a specialized fuel pump removal tool to unscrew and extract the unit.
9
1
Share

How to fix the peeling dashboard of a Buick Excelle?

If the dashboard warping issue occurs during the car's warranty period, you can contact after-sales service for relevant handling. If the car's warranty period has expired but the dashboard warping issue occurs, you can go to an auto repair shop for handling.
13
2
Share

What Causes the ABS Light to Illuminate in a Jaguar?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the contaminants from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal operation. Cause 2: Poor signal transmission due to loose system wiring connections or poor contact in the ABS relay, leading to system malfunction. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, the battery voltage drops below 10.5V. As engine speed increases, voltage rises, and the ABS light turns off. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine startup until the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor electrical connector contact in the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check for enlarged connector gaps; replace the ABS or ABS/ASR control unit. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim specifications, typically listed on the fuel tank cap sticker. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage fully downward, then release the pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
17
1
Share

How to adjust the ambient lighting in the 2021 Audi A6L?

You can adjust the interior ambient lighting through the MMI display. Press the CAR button to select the system and enter the background lighting interface. The ambient lighting at the front footwells, rear footwells, front door panels, and rear door panels can all be set via the MMI.
2
0
Share

How to Repair Cracked Leather in Car Interior?

Use a soft brush and a slightly damp towel to thoroughly clean the leather that needs repair or has wrinkles. Sand the leather surface that requires repair with water sandpaper, and remove any already cracked leather as well. Apply leather repair paste to the surface that needs fixing, spray a layer of primer on the leather surface, then complete the coloring within 60-150 seconds.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.