Is the Tharu's transmission a dry or wet dual-clutch?

1 Answers
SanStephanie
07/30/25 1:28am
The Tharu models equipped with the 1.4T engine use a dry dual-clutch transmission, while those with the 2.0T engine use a wet dual-clutch transmission. The structure of a dual-clutch transmission is essentially the same as that of a manual transmission, except that it has two sets of clutches—one controlling the odd-numbered gears and the other controlling the even-numbered gears. Dual-clutch transmissions offer high transmission efficiency, fast gear shifting, relatively compact size, and lighter weight. The Tharu is a compact SUV launched by SAIC Volkswagen, featuring the Rock Cutting design concept for its exterior. The raised lines on the ridge-like hood enhance the sense of power, while the wide-body dual U-shaped full LED headlights tilt upwards, with the grille strips extending to the headlights.
Was this review help?
13
0
Share
More Forum Discussions

Why is the rear light of the Corolla always on and cannot be turned off?

The rear light of the Corolla may stay on and cannot be turned off because the trunk is not properly closed. It could also be a lighting malfunction, and you can go to a 4S shop for repair. Here is some additional information: 1. Lever-type lighting: The Corolla uses lever-type lighting. Turning it to the indicated position will turn on the corresponding light, which is the most commonly used light switch in Toyota vehicles. Rotating the leftmost part will align the white line with the currently used light. The middle part can also be rotated to turn on the fog lights. 2. Conditions for turning on high beams: Turning on high beams requires the prerequisite of turning on low beams. In other lighting positions (off or parking lights), high beams cannot be turned on.
7
2
Share

What is the real fuel consumption of Changan CS55 Plus?

The official fuel consumption of Changan CS55 is 6.5L per 100 kilometers, while many car owners have measured the actual fuel consumption to be around 7-8.5L. This fuel consumption is not particularly high for an SUV, but it is not especially fuel-efficient either, falling into the moderate range. Below is some relevant information: 1. Factors affecting car fuel consumption: the thermal efficiency of the engine, the mechanical efficiency of the engine and transmission system, and the resistance the car encounters. 2. Methods to reduce fuel consumption: Generally speaking, the thermal efficiency of the engine and the mechanical efficiency of the car are designed at the factory and cannot be changed, but the driving resistance of the car can be controlled. The biggest factor affecting a car's driving resistance is its weight. As long as the weight of the car is reduced, the fuel consumption will decrease significantly.
8
5
Share

Why does the Corolla make abnormal noise when stepping on the accelerator?

Abnormal noise when stepping on the accelerator in a Corolla may be caused by issues in the transmission. Problems such as transmission oil pump failure, loose transmission bearings, or torque converter malfunction can all lead to this situation. Here is some additional information: The Corolla is the tenth-generation straight-line upgrade product of the Toyota COROLLA. Compared to the previous generation Corolla, the body dimensions have been significantly increased, presenting an unprecedented "wide and low" stance while creating a more spacious interior. The newly developed 1.6-liter and 1.8-liter engines with dual VVT-i technology deliver a more powerful driving experience.
2
2
Share

How to activate voice control in Buick Regal?

Buick Regal can activate the voice assistant by pressing the button on the left side of the steering wheel or saying the "wake word". Below is an introduction to the voice assistant: 1. Wake word: Users can set a personalized wake word. 2. Functions: Users can interrupt the voice assistant's broadcast, and also perform functions such as making calls, controlling volume, and playing music. 3. Real-time: Mostly a real-time system, meaning that after the user finishes speaking the phrase to be recognized, the system immediately completes the recognition function and responds, requiring high computational speed from the circuit.
7
3
Share

Where is the production location of the Changan CS75 engine?

The engine of the Changan CS75 is independently developed by Changan and produced at the Changan Engine Plant's Jiangling facility. It is based on the independent research and development of Changan's UK R&D Center and the BlueCore NE powertrain platform. The engine model used in the Changan CS75 is the JL473ZQ5, with a maximum horsepower of 180 HP, a maximum power output of 132 kW, a maximum power speed of 5500 rpm, and a peak torque of 300 N·m. For daily maintenance of the Changan CS75 engine, the following methods can be applied: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various engine issues. To avoid malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may rupture or the safety valve may open, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. In small amounts, the sludge remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
12
1
Share

What preparations should be made before driving?

Before driving, the following preparations should be made: carefully inspect the surroundings of the vehicle to check for any obstacles under or around the car. After getting in, close the door properly, adjust the seat, fasten the seat belt, start the vehicle, check if all systems are functioning normally, and adjust the rearview mirrors. Preparations for rainy or snowy weather inside the car: 1. Keep a dry towel and some newspapers in the car: During rainy or snowy weather, the outside temperature can be very cold. Since the interior of the car is warm, the warm air exhaled by passengers can condense on the cold windows, forming fog. Turn on the air conditioning to the cooling mode and direct it towards the windows to quickly defog them. If the air conditioning is not working, use the dry towel or newspaper to wipe the windows. 2. Turn on the rear window defroster when there is ice: If the rear window is frozen, turn on the rear window defroster as needed. If the vehicle has this function, it can be activated simultaneously. The rear window defroster should not be used for extended periods; turn it off immediately once the ice has melted. 3. Install snow chains during rainy or snowy weather: Snow chains can be installed in rainy or snowy conditions for temporary traction. They are generally available at auto parts stores at an affordable price.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.