Is the Tharu equipped with a wet clutch?

1 Answers
OAngelo
07/30/25 4:18am
Both wet and dry clutches are available. This model is equipped with two types of engines: a 1.4T and a 2.0T. The 1.4T variant comes with a 7-speed dry dual-clutch transmission, while the 2.0T variant is paired with a wet dual-clutch transmission. Below is an introduction to the Volkswagen Tharu: 1. Most of Volkswagen's 1.4T models use a dry dual-clutch transmission, while the 2.0T models use a wet dual-clutch transmission. 2. Both transmissions operate on the same principle, utilizing two clutches that work alternately. The main difference between the two lies in their working environments. The clutch plates of the dry dual-clutch transmission directly contact the engine's flywheel, whereas the wet dual-clutch transmission operates immersed in transmission fluid. Comparatively, the wet dual-clutch transmission performs better under working conditions. 3. During engine operation, heat is generated due to transmission friction. The dry dual-clutch is more prone to overheating because it relies on air for cooling, which is relatively slower. In contrast, the wet dual-clutch is immersed in fluid, allowing for faster heat dissipation. As a result, more car owners prefer the wet dual-clutch transmission.
Was this review help?
14
2
Share
More Forum Discussions

What engine does the Haojue UHR150 use?

Haojue UHR150 engine is domestically produced. The Haojue UHR150 uses a single-cylinder water-cooled engine. Its dimensions are 1950mm x 755mm x 1120mm, with a wheelbase of 1315mm, a curb weight of 140kg, a minimum ground clearance of 120mm, and a seat height of 760mm. The fuel tank capacity is 8L, equipped with front 110/80-14 and rear 130/70-14 tires. Power parameters: actual displacement of 149ml, compression ratio of 10.6:1, maximum power of 10.6KW, maximum torque of 14.2N.m released at 6500 rpm. The engine is a critical component of a motorcycle. Proper maintenance using scientific methods can preserve engine performance and extend the vehicle's lifespan. Air filter element: Polyurethane filter element: Clean every 3000Km, no replacement needed; Paper filter element: Clean every 4000Km, replace every 12000Km. If the filter element gets clogged with dust, the intake resistance will increase, leading to reduced engine output power and increased fuel consumption. Exhaust pipe bolts and muffler mounting nuts: Tighten after 1000km and 8000km of riding. Oil change, as specified in the manual: The first 1000km is the break-in period. During break-in, do not exceed half throttle. After 1000km, the first oil change is required. Post break-in, change the oil every 2000km or every 4 months.
7
4
Share

Is It Normal for Beginners to Scratch Their Cars?

It is normal for beginners to scratch their cars. Here are some common-sense tips for novice drivers: Pay attention to speed: As long as you're not on the highway, it's advisable for beginners to maintain a steady speed of around 60 km/h, which helps with control. Check the rearview mirrors frequently: Rearview mirrors allow you to observe the road conditions on both sides and behind the vehicle, especially when changing lanes, reversing, or overtaking. They play a crucial role. Maintain a safe distance: Novice drivers tend to follow other cars too closely. If the car in front brakes or cuts in, beginners often react by slamming on the brakes immediately. Sometimes, excessive nervousness can lead to oversteering, causing accidents. Therefore, keeping a safe distance from the car ahead is essential. If someone cuts in, slow down appropriately to yield. Use lights correctly: Avoid turning on hazard lights randomly. Turn on the side marker lights at dusk, and fog lights should only be used in foggy conditions with poor visibility.
1
4
Share

What is the voltage of power batteries in new energy vehicles?

The voltage of power batteries in new energy vehicles is as follows: the working voltage of lead-acid batteries ranges from 2V to 1.8V; the working voltage of nickel-metal hydride batteries ranges from 1.5V to 1.1V; and the working voltage of lithium-ion batteries ranges from 3.6V to 2.75V. Introduction to the Power Battery Management System: The Power Battery Management System (BMS) typically monitors and samples real-time parameters such as individual cell voltage, total voltage, total current, and temperature, and feeds these real-time parameters back to the vehicle controller. In addition to monitoring battery performance parameters and implementing electrical performance management, the BMS also manages the application environment, primarily through thermal management, to heat or cool the battery, ensuring a suitable operating temperature and consistency in the temperature field. Hazards of Battery Management System Failures: If the power battery management system fails, it loses the ability to monitor the battery and estimate its state of charge. This can easily lead to overcharging, over-discharging, overloading, overheating, and increased inconsistency issues, affecting battery performance, service life, and even driving safety.
14
0
Share

What Causes the Grounding Fault Display During New Energy Vehicle Charging?

New energy vehicles displaying a grounding fault during charging may be due to the installed grounding bar failing to meet the charging pile equipment requirements. Solutions for grounding faults: If at a public charging station, call the official customer service hotline and wait for repairs, prioritizing other available charging equipment; For residential property owners, it's advisable to contact the property's electrician for troubleshooting; For owners in older residential buildings, first check if the nuts at the grounding device connection are tightened and whether there is any rust. If nuts are loose or rusted, retighten them and remove rust from affected areas to ensure grounding safety. Charging precautions: For new vehicles, completely deplete the battery before the first charge, then charge it fully—preferably for up to 12 hours to enhance battery performance. During regular charging, avoid excessively long charging times; around 7 hours is generally sufficient to prevent battery damage. Prolonged charging may cause the battery to swell. If this occurs, discontinue use immediately to avoid potential hazards like explosions.
10
4
Share

Can a new car be shipped by a 4S store or driven?

A new car can be shipped by a 4S store, and vehicle shipping also includes insurance. Document Preparation: When shipping a car, the owner needs to provide a copy of their ID card and vehicle license for company records and inspection during the shipping process. Signing a Contract: A contract must be signed with the shipping company, which must be an official contract with the company's official seal. The contract must clearly state the shipping costs and payment methods to better protect your legal rights in case of disputes. Legal Transportation: During the car shipping process, illegal vehicle transportation is strictly prohibited. Vehicles must not contain flammable, explosive, or controlled items such as knives or guns. Additionally, before signing the contract, the owner should personally inspect the vehicle's interior items and surface condition with the shipping company. Any discrepancies not noted in the contract may result in difficulties claiming compensation for lost items or vehicle damage upon delivery. Clear Value:
15
4
Share

Is it better to replace or repaint a scratched new car bumper?

It is appropriate to repaint a scratched new car bumper. If the base coat is not exposed, local polishing will suffice. If the scratch is severe, it is also recommended to have the 4S shop perform a partial repaint to preserve the original paint as much as possible. Methods for car paint repair: Minor scratches can be repaired using a touch-up pen and wax. However, if the paint damage is obvious and reaches the base coat, it is necessary to go to a professional institution for sanding first, followed by spray painting and baking. Generally, an entire panel needs to be repainted depending on the location. Precautions for car paint repair: It is essential to go to a specialized large repair shop or 4S shop for paint repair. Pay attention to the difference between the mixed paint color and the original car paint, and try to use original factory paint or branded paint as much as possible.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.