Is the temperature display in the car showing the interior or exterior temperature?

2 Answers
Humbert
07/25/25 4:29am
The temperature display in the car shows the exterior temperature. Here is some related extended information: 1. Temperature display: The car's outdoor temperature alerts the driver when external temperatures are low, warning of potential icy roads and advising cautious driving. This is simply a thoughtful reminder and not a malfunction indicator or activation of snow mode. Vehicles equipped with this function typically issue a warning when the external temperature drops below 4 degrees Celsius, as drivers may not feel the external temperature changes inside the car. 2. Dashboard: There are numerous indicator lights on a car's dashboard, especially in more advanced models where the dashboard displays more information. This means drivers need to be aware of an increasing number of indicators. After completing the new car inspection and driving your beloved vehicle home, be sure to study the manual thoroughly to understand all these indicators.
Was this review help?
18
4
Share
TylerLee
08/10/25 5:23pm
I've been driving for ten years and have researched this exact issue. That number on the dashboard actually shows the outside temperature, with the sensor hidden in the air intake or behind the rearview mirror. However, the temperature displayed on the center console's AC screen is the interior temperature, monitored in real-time by a thermistor sensor. You can clearly notice the difference when using the heater in winter: the dashboard might show below zero while the center console displays 22°C. Interestingly, some vehicles even display dual-zone temperature values simultaneously - my old Mercedes could show a 3°C difference between left and right seats. All these designs aim to provide more precise climate control.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How to Check the Battery Level of a Mercedes-Benz?

To check the battery level of a Mercedes-Benz, a battery tester is required for monitoring, as Mercedes-Benz uses maintenance-free batteries without an inspection observation hole. More detailed information is as follows: 1. For the battery, simply checking the voltage is insufficient because the function of the battery is not just to output 12V voltage, but more importantly, to store electricity. Many vehicle batteries show a voltage of 12V but still fail to start the vehicle, which is a phenomenon known as false voltage. Therefore, the battery voltage read from the vehicle's dashboard or measured with a multimeter can only serve as auxiliary references and do not represent the battery's power storage capacity or quantity. 2. By using a battery tester, you can directly see three test results: whether the battery is good, needs charging, or requires replacement. This is the same principle as observing the green, yellow, and black indicators in the inspection hole of batteries that have one. Additionally, the Mercedes-Benz vehicle's onboard computer also monitors the battery level and charging status. When the battery level is low, the dashboard will display a warning about battery discharge or the need for replacement.
20
2
Share

What causes the EPC light to come on in a truck?

The reasons for the EPC light coming on in a truck are as follows: 1. Severe carbon buildup in the throttle body. Severe carbon buildup in the throttle body is the main cause of the EPC light coming on. When the throttle body has severe carbon buildup, the vehicle may also experience issues such as sluggish acceleration, increased fuel consumption, and difficulty starting. 2. Engine overheating. If the truck's engine operates under excessive load for too long, it can trigger multiple warning lights. In this case, the vehicle should be pulled over and turned off to allow it to cool down naturally. If warning lights remain on after the engine cools down, it's necessary to take the vehicle to a repair shop or 4S store for servicing. 3. Fault in the vehicle's intake system. If there's a fault in the truck's intake system, especially if there's a leak in the crankcase ventilation system, it can also cause the EPC light to come on. 4. ECU malfunction. The causes of ECU malfunctions are relatively complex and require professional inspection at a repair shop or 4S store.
3
2
Share

What is the difference between a 2600mm and 2700mm wheelbase?

The difference between a 2600mm and 2700mm wheelbase is 100mm, which can affect interior space and ride comfort. Wheelbase refers to the distance between the centers of two adjacent wheels on the same side of the vehicle, perpendicular to the longitudinal symmetry plane of the car, and can influence the vehicle's maneuverability. Different classes of passenger cars have varying wheelbases, as follows: 1. A00-class vehicles have a wheelbase of 2 to 2.3m with an engine displacement of less than 1 liter; 2. A0-class vehicles have a wheelbase of 2.3 to 2.5m with an engine displacement of 1 to 1.5 liters; 3. A-class vehicles have a wheelbase of 2.5 to 2.7m with an engine displacement of 1.6 to 2.0 liters; 4. B-class vehicles have a wheelbase of 2.7 to 2.9m with an engine displacement of 1.8 to 2.4 liters; 5. C-class vehicles have a wheelbase of 2.8 to 3m with an engine displacement greater than 2.4 liters; 6. D-class luxury vehicles have a wheelbase greater than 3m with an engine displacement of 3.0 liters or more.
1
4
Share

What Causes Smooth Operation When Cold but Jerking When Warm?

Cold smooth operation but jerking when warm is due to a damaged solenoid valve, which requires prompt repair at a professional auto shop. Below is relevant information about solenoid valves: 1. Introduction: An electromagnetic valve (solenoid valve) is an industrial device controlled by electromagnetism, serving as a fundamental automation component for fluid control. As an actuator, it's not limited to hydraulic or pneumatic systems. In industrial control systems, it regulates medium direction, flow rate, speed, and other parameters. Solenoid valves can work with different circuits to achieve desired control with ensured precision and flexibility. There are various types of solenoid valves serving different functions in control systems, with the most common being check valves, safety valves, directional control valves, and speed regulating valves. 2. Working Principle: The solenoid valve contains a sealed chamber with connecting holes at different positions, each linked to different oil pipes. A piston sits in the chamber's center, flanked by two electromagnets. The valve body moves toward whichever electromagnet coil is energized, opening or closing different drain ports while keeping the inlet port normally open. Hydraulic oil then enters different drain pipes, using oil pressure to drive the cylinder's piston. The piston moves the piston rod, which in turn drives mechanical devices. Thus, mechanical movement is controlled by switching the electromagnet's current on and off.
15
3
Share

Where is the fuel filler switch located in the Polo?

The fuel tank cap switch of the Volkswagen Polo is located below the left side of the driver's seat. Here is more extended information about the Volkswagen Polo: 1. Advantages: The car body is relatively heavy, providing good safety, and the exterior is stylish and dynamic. 2. Exterior: The appearance is dynamic and fashionable, especially the headlights, with LED side turn signals being a relatively mainstream configuration recently. 3. Handling: It offers handling performance that cannot be matched by other models in the same class. Whether at high speeds or low speeds in urban areas, the Polo always maintains excellent stability and operability, with precise steering and effortless maneuverability.
17
3
Share

Which to Follow When Road Signs and Markings Are Inconsistent?

When road signs and markings are inconsistent, the road signs take precedence. Below is a detailed introduction to road markings: 1. Indicative markings: Road traffic markings are classified according to their functions. Indicative markings indicate facilities such as vehicle lanes, driving directions, road edges, and pedestrian crossings. 2. Prohibitive markings: These markings announce special regulations for compliance, prohibition, or restriction in road traffic, which must be strictly followed by drivers and pedestrians. 3. Warning markings: These markings alert drivers and pedestrians to special road conditions, prompting them to be vigilant and prepared to take preventive or responsive measures.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.