Is the Suzuki RG500 still available now?

What are the maintenance items for the BMW 320li?

BMW 320li maintenance items (replacement cycle in parentheses): 1. Engine oil and oil filter replacement (10,000 km): Improves oil quality, ensures smoother power delivery, and extends engine life; enhances the ability to filter impurities and debris. 2. Fuel filter (30,000 km): Removes impurities and moisture from fuel, allowing the engine to perform at its best. 3. Spark plugs (Platinum: 60,000 km; Iridium: 80,000 km): Prevents ignition difficulties and ensures the engine does not suffer from power loss. 4. Brake fluid (40,000 km): Absorbs moisture from the air, improves braking performance, and ensures driving safety. 5. Brake pads (should not be less than 3mm): Prolonged use can cause severe wear on brake pads, reducing braking effectiveness. Replacing brake pads ensures stable handling performance. 6. Air and cabin air filters (30,000 km): Improves the quality of intake air, allowing the air distribution system to function efficiently; enhances air quality by filtering dust and unpleasant odors. 7. Comprehensive vehicle inspection: A thorough check of the vehicle to ensure safe driving.

3

4

Share

When to Use D+ and D- in Automatic Transmission?

Here is a detailed introduction on when to use D+ and D- in automatic transmission: 1. When going uphill or downhill: When frequently climbing long or steep slopes, if the automatic transmission's computer controls the gear shifting, there may be instances of gear dragging. This manifests as high gear with low speed, causing the engine to lack power and vibrate intensely, increasing the chance of incorrect air-fuel ratio. Incomplete combustion of the fuel mixture can easily produce a large amount of carbon deposits and increase fuel consumption. Using manual mode in such situations can effectively reduce these occurrences. When going downhill, avoid coasting in neutral and instead use engine braking to reduce the burden on the braking system. In this case, manual mode can be used to lower the gear by one or two levels to assist with braking, rather than relying on the computer to control the gear based on speed. 2. When overtaking or starting: Manual mode (D+ and D-) can be used when overtaking to manually downshift for greater power. This also applies when starting, especially in racing or at traffic lights.

11

0

Share

Has the Volkswagen Tayron's Particulate Filter Issue Been Resolved?

Volkswagen Tayron's particulate filter issue has not been resolved. Function of the particulate filter: The particulate filter can reduce soot produced by diesel engines by over 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. The treatment methods for particulate filter clogging differ between diesel and gasoline vehicles, as follows: For diesel vehicles, simply press the regeneration button on the car. The engine will then increase its RPM while stationary, and generally, the particulate filter will be cleaned in about ten minutes, resolving the clogging issue. For gasoline vehicles, the owner should first shift the car into S mode, then drive at high speed for a period. During high-speed driving, the exhaust pipe temperature rises, burning off the clogged particles in the particulate filter, thereby solving the clogging problem. If the particulate filter is severely clogged and the above methods don't work, it can be sent to a car repair shop or 4S store for professional cleaning with specialized equipment.

11

3

Share

Should the Sagitar use 92 or 95 octane gasoline?

The Sagitar 1.6L can use either 92 or 95 octane gasoline. However, for turbocharged engines with a compression ratio exceeding 10, such as the Sagitar 1.4T, while both 95 and 92 octane gasoline can be used, 95 octane is recommended for better engine protection. Below are the relevant details: 1. The difference between 95 and 92 octane gasoline: The main distinction lies in their anti-knock properties, determined by their iso-octane content. Generally, it's sufficient to follow the manufacturer's recommended gasoline type without necessarily opting for a higher octane rating. While the Sagitar uses standard 95 octane gasoline abroad, the engines have been optimized for the domestic market to accommodate local fuel quality conditions. 2. Gasoline selection criteria: The choice of gasoline is primarily related to the engine's compression ratio. Typically, 92 octane gasoline is suitable for gasoline-powered vehicles with a compression ratio between 8.6 and 9.9. 95 octane gasoline is appropriate for engines with a compression ratio between 10.0 and 11.5, while 98 octane gasoline is recommended for vehicles with a compression ratio above 11.6.

15

2

Share

What is the tire model specification for the Audi Q5?

The tire model for the Audi Q5 is 235/55R19. The first number 235 represents the tire width of 235MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 19 denotes the rim diameter of 19 inches. The Audi Q5 has a top speed of 220km/h, accelerates from 0 to 100km/h in 2.68 seconds, and has a fuel consumption of 3.0L per 100km. In addition to the model, the tire also carries the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.

10

3

Share

Why does the car air conditioner sometimes blow cold and sometimes not?

The reasons why a car air conditioner sometimes blows cold and sometimes not are as follows: 1. Excessive refrigerant: When the car is driving at high speed, the rotation speed is fast, and the pressure of the refrigeration system is high, the pressure controller (pressure switch) activates, causing the compressor to stop, and the air conditioning refrigeration stops at this time. When the car is driving at low speed, the rotation speed is slow, and the pressure of the refrigeration system is low, the pressure switch closes, the compressor works, and refrigeration resumes. Therefore, the refrigeration is intermittent. 2. Lack of Freon: The cause of this situation is usually a leak in the air conditioning system's pipes. At this time, you can drip some water at the joint of the car's refrigerant pipe, and bubbles will appear at the leak. Find the leak and repair it. Then remember to go to a professional car repair shop or 4S shop to add some Freon. 3. The filter is too dirty. Try to find the bypass valve on the filter base. When the pressure difference between the two sides of the valve reaches a certain value, it can be opened. Generally, the oil flows into the main pipe through the pipeline. Use a car-specific lubricant to lubricate other related components, and the situation will improve. 4. The air conditioning filter is aging: If the car air conditioning filter has been used for too long, it needs to be replaced.

14

5

Share

Is the Suzuki RG500 still available now?

What are the maintenance items for the BMW 320li?

When to Use D+ and D- in Automatic Transmission?

Has the Volkswagen Tayron's Particulate Filter Issue Been Resolved?

Should the Sagitar use 92 or 95 octane gasoline?

What is the tire model specification for the Audi Q5?

Why does the car air conditioner sometimes blow cold and sometimes not?

Should the BMW headlight switch be placed at 0 or A position?

Is the Jinglan Line a highway?

How to Check the Application Status for Personal Passenger Vehicle Incremental Quota?

What does DTC mean in cars?