Is the Subject 4 Test Unlimited and Free of Charge?

What brand is the transmission of the Mazda 8?

The transmission of the Mazda 8 is manufactured by Aisin. Established in 1969, Aisin is a world-renowned specialist in the research, development, and production of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin holds the highest global market share. The Mazda 8 is equipped with a 5-speed automatic manual transmission. The automatic manual transmission features eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with the added functionality of manual shifting. The purpose of this design is to enhance the driving experience for automatic transmission vehicles. When using the Mazda 8's transmission in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this practice can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D) mode. Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers, aiming for a 'smooth' operation, may shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and, over time, lead to gear grinding or other failures. Avoid frequently climbing steep slopes in Drive (D) mode. When tackling steep inclines, automatic transmission vehicles may overheat due to high loads or struggle with insufficient power due to premature upshifts. In such cases, using the manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N) mode, rather than being towed directly with a tow rope or similar method.

16

2

Share

What are the body dimensions of the Land Cruiser?

The Land Cruiser has a length, width, and height of 5095/1975/1930mm respectively, with a wheelbase of 2850mm. This vehicle excels in the following aspects: 1. Exterior design. The front grille features a horizontal bar design with rugged silver decorative strips. The headlight clusters are connected to the decorative strips and incorporate LED daytime running lights. Additionally, the front bumper design has been updated, and the fog light clusters on both sides now feature chrome borders. 2. Interior features. The exterior rearview mirrors are electrically adjustable, providing great convenience for the driver; they also include LED turn signals for enhanced safety. The photographed model does not come with heated rearview mirrors; there is an air deflector between the A-pillar and the rearview mirror. 3. Powertrain. The 4.0L engine is paired with a 5-speed automatic transmission, while the 4.6L engine comes with a 6-speed automatic transmission. The new engines incorporate Dual VVT-i technology.

4

3

Share

Is the DS7 an imported car?

DS7 is not imported; it is a compact SUV produced by Changan PSA (Peugeot Citroën) and is entirely domestically manufactured. This vehicle excels in the following aspects: 1. Body dimensions. The DS7 measures 4603*1891*1626 mm in length, width, and height. 2. Powertrain. The DS7 is equipped with a 1.6-liter four-cylinder turbocharged engine across all variants, available in high and low power tuning. The high-power version delivers a maximum horsepower of 215 HP, while the low-power version offers 181 HP. 3. Transmission. The DS7 features an 8-speed automatic transmission across all models. 4. Fuel consumption. According to the Ministry of Industry and Information Technology's combined fuel consumption data, the DS7 has a combined fuel consumption of 6.2L/100km. 5. Suspension. The DS7 comes with a front MacPherson strut independent suspension and a rear multi-link independent suspension. 6. Features. The DS7 is standard equipped with a tire pressure monitoring system, electronic stability control, traction control system, front and rear parking radar, cruise control, driving mode selection, engine start-stop, hill start assist, panoramic sunroof, keyless start, and power-adjustable exterior mirrors.

17

3

Share

Is the Cadillac CT5 fuel-efficient?

Cadillac CT5's official combined fuel consumption per 100 kilometers is 8.4L. This car has advantages in the following aspects: 1. Exterior design. The Cadillac CT5 adopts Cadillac's latest design language, featuring a classic shield-shaped grille paired with slim headlights, creating a highly impactful front fascia. 2. Interior. The Cadillac CT5 maintains Cadillac's consistent high-quality standards in terms of interior materials and craftsmanship. The steering wheel and center console screen have a novel design with good texture. 3. Powertrain. The Cadillac CT5 is equipped with a 2.0L inline 4-cylinder engine that delivers 241 horsepower. It is paired with a 10-speed automatic transmission, and the chassis features front MacPherson independent suspension + rear five-link independent suspension.

7

0

Share

What are the B1 license test items?

B1 license test is divided into Subject 1, Subject 2, and Subject 3, as follows: Subject 1: The test content includes road traffic rules, traffic signals, traffic safety violations and accident handling, motor vehicle driver's license application and usage, motor vehicle registration regulations, and other road traffic safety laws, regulations, and rules. Subject 2: The test content includes large buses, tractors, city buses, medium-sized buses, and large trucks for pole tests, hill-start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, passing through width-limited gates, passing continuous obstacles, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. Subject 3: The road driving skills test includes large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission passenger cars for the disabled. Test items include preparation before starting, starting, straight-line driving, gear shifting, lane changing, pulling over, passing straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and night driving. Subject 4: Safety knowledge test. The total test time is 45 minutes, with a full score of 100, and a passing score of 90 or above. Those who fail can retake the test after 10 days. The B1 license allows driving medium-sized passenger vehicles, defined as vehicles not exceeding 6 meters in length, with a seating capacity of 10 (inclusive) to 19 (inclusive) passengers. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). Note that the B1 license does not include B2. If a B1 license holder wants to drive large trucks, they can upgrade their license to B1B2 (or A1, A2, A1A2, etc.). Application requirements: Height: Applicants for medium-sized passenger vehicles must be at least 150 cm tall. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Color vision: No red-green color blindness. Hearing: Must be able to distinguish the direction of sound sources with each ear 50 cm from a tuning fork. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement. Lower limbs: Both lower limbs must be intact with normal movement, and the length difference must not exceed 5 cm. Torso and neck: No movement dysfunction. B1 test precautions: Reverse from the starting point into the second bay and stop, then move forward and backward twice to shift into the first bay and stop correctly. Proceed forward through the second bay onto the road, reverse into the first bay and stop correctly, then exit and return to the starting point. Drive according to the specified route and sequence. The vehicle must start smoothly and must not stall or stop midway. Do not use clutch semi-engagement during vehicle movement. Do not extend the head or hands outside the vehicle or open the door to look during driving. After each start or stop, the vehicle must not roll. Do not turn the steering wheel while stationary. Strictly follow driving operation procedures. According to the "Motor Vehicle Driver's License Business Work Standards" issued by the public security department, motor vehicle driver's licenses are classified into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. The permitted vehicle types for each level are as follows: A1 license: Permitted to drive large passenger vehicles. A2 license: Permitted to drive tractors and heavy or medium-sized full or semi-trailer combinations. A3 license: Permitted to drive city buses with a seating capacity of 10 or more. B1 license: Permitted to drive heavy passenger vehicles. B2 license: Permitted to drive heavy or medium-sized trucks, etc. C1 license: Permitted to drive small or mini passenger vehicles, etc. C2 license: Permitted to drive

17

0

Share

What car shares the same oil filter model as the Haval M6?

Haval M6 shares the same oil filter model with Haval H2 and Haval H6. Here is the relevant information: 1. The oil filter, also known as the oil cleaner, functions to filter out impurities, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. To reduce friction between moving parts in the engine and minimize wear, engine oil is continuously supplied to the friction surfaces of moving components, forming a lubricating oil film for lubrication. 2. Engine oil inherently contains a certain amount of gum, impurities, moisture, and additives. During engine operation, metal particles, airborne contaminants, and oil oxidation products increase the impurities in the oil. If the oil is not filtered before entering the lubrication circuit, these impurities will be carried to the moving friction surfaces, accelerating part wear and reducing the engine's service life.

10

1

Share

Is the Subject 4 Test Unlimited and Free of Charge?

What brand is the transmission of the Mazda 8?

What are the body dimensions of the Land Cruiser?

Is the DS7 an imported car?

Is the Cadillac CT5 fuel-efficient?

What are the B1 license test items?

What car shares the same oil filter model as the Haval M6?

How many seats does the Coaster have?

Is There a Time Limit for the Driving License Test Subject 1?

How to Adjust the Steering Wheel on a Malibu?

How many cylinders does the Volvo XC40 have?