Is the Subject 2 Test Taken with a Pickup Truck or a Sedan?

1 Answers
VanCora
07/30/25 7:09am
Subject 2 can be taken with either a pickup truck or a sedan. Taking the Subject 2 test with a pickup truck or a sedan each has its own advantages. Here are the relevant details: 1. Differences: The size of a pickup truck is larger than that of a sedan, and its rear is longer, so the reference points for each item in Subject 2 differ significantly from those of a sedan, but they are generally similar. As long as you master the reference points, the difference from taking the test in a sedan is not significant. 2. Disadvantages of Pickup Trucks: The steering of a pickup truck is heavier, and its handling is not as flexible and comfortable as that of a sedan. The interior space is also not as comfortable as that of a sedan, so women who do not want to endure wind and sun exposure during Subject 2 practice can choose to practice with a sedan.
Was this review help?
7
1
Share
More Forum Discussions

What Causes Poor Car Acceleration?

Poor car acceleration can be attributed to the following reasons: 1. Carbon buildup: Excessive carbon deposits inside the engine reduce ignition energy and intake efficiency, leading to decreased engine power and poor acceleration; 2. Fuel system issues: Using mismatched fuel grades or blockages in the fuel tank vent, fuel lines between the tank switch and fuel filter can restrict fuel supply, resulting in a lean air-fuel mixture and weak engine acceleration; 3. Air intake system problems: Since air is a key component of engine power, a clogged air filter due to prolonged use without cleaning reduces airflow, causing an overly rich air-fuel mixture and diminished engine performance; 4. Engine overheating: Insufficient engine oil or coolant levels, along with faulty cooling systems, increase engine load and impair heat dissipation.
8
0
Share

How Often Should Brake Discs on a New Car Be Replaced?

New brake discs do not have a fixed replacement interval. The maximum wear limit for brake discs is 2 millimeters, and they must be replaced once this limit is reached. The lifespan of brake discs is not strictly predetermined but depends on individual driving conditions, frequency of use, and driving habits, which vary from person to person. The replacement frequency for new car brake discs should be assessed based on personal driving habits: 1. Observe the replacement frequency of the brake pads; 2. Determine based on the wear condition; 3. Owners can also consider replacement according to a certain pattern; 4. The lifespan of brake discs is determined by the quality of the brake discs themselves and the owner's personal driving habits.
7
4
Share

What to Do When a Tire Gets Punctured by a Nail?

Tire puncture solutions: 1. If there is no air leakage after the puncture, you can use your saliva to check if bubbles appear at the puncture site. Generally, if no bubbles are observed, it indicates the nail hasn't penetrated deeply, and there's no need to remove it if there's no air leakage; 2. If there is air leakage after the puncture, do not continue driving. Seek assistance on the spot. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. Typically installed on metal rims, they support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance.
11
4
Share

What is the minimum ground clearance of the Honda URV?

The minimum ground clearance of the Honda URV is 208mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. The overall design of the Honda URV appears very refined, with the taillights adopting a horizontal design that looks full of technology and higher recognition. The dimensions of the vehicle are 4856mm in length, 1942mm in width, and 1670mm in height, with a wheelbase of 2820mm. In terms of exterior design, the URV retains more design elements of the CONCEPT D concept car. The front grille features a large-mouth style design, with chrome trim at the center that integrates into the interior of the headlight units at both ends.
15
3
Share

What is the fuel tank capacity of the Honda EX125?

New DaZhou Honda EX125 scooter has a fuel tank capacity of 6 liters. This is the total capacity when empty. Introduction to fuel tank: The fuel container on aircraft or automobiles, known as the fuel tank, is referred to in hydraulic terminology as a specialized container for storing hydraulic oil or fluid in hydraulic systems. Fuel tanks can be divided into two types: open tanks and closed tanks. The bottom of the tank should be at least 150mm above the ground, and sufficient attention must be paid to the anti-corrosion treatment of the inner surface of the tank. Functions of the fuel tank: In addition to storing oil, the fuel tank in a hydraulic system also serves to dissipate heat, separate air bubbles from the oil, and precipitate impurities. The tank is equipped with many accessories, such as coolers, heaters, air filters, and liquid level gauges.
18
1
Share

What does the sun symbol on the Audi A6 dashboard mean?

The appearance of a yellow sun warning light on the Audi dashboard indicates that the brake pads have worn to their limit. It is recommended to check the brake pads, and if they are severely worn, they should be replaced immediately. Brake pad replacement timing: According to the maintenance manual, replacement is typically required when the pads wear down to 1.5mm. However, it's best not to wait until this extreme limit; replacement at around 2-3mm is advisable to prevent reduced braking effectiveness or excessive wear on the brake discs. Visual inspection for brake pad replacement: When visually inspecting the brake pads, a general rule is to check their thickness after driving approximately 30,000 kilometers. When the remaining thickness is about 3mm (only 1/3 of the original thickness), you should start considering replacement. Note that some vehicle models don't allow visual inspection of brake pad thickness, in which case you'll need to visit a repair shop for professional assessment. Certain vehicles even provide a self-check function, displaying brake pad wear status on the dashboard.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.