Is the Subject 2 Retake Exam Conducted on the Same Day?

3 Answers
MacSienna
07/29/25 4:12am
Subject 2 retake exam is conducted on the same day. The specific details are as follows: Reason: For each subject exam, if the initial attempt is unsuccessful, a retake is allowed immediately without additional fees. This applies to all subjects. Subject 2 Retake Rules: Each subject exam allows one retake if the initial attempt fails. If the candidate chooses not to take the retake or fails the retake, the exam session ends, and the candidate must reschedule the exam. Information about Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. Teaching Objectives: Master the basic driving operation essentials, possess fundamental vehicle control abilities; proficiently grasp basic methods for field and road driving, have the capability to reasonably use vehicle control components and correctly manage the vehicle's spatial position, and accurately control the vehicle's position, speed, and route.
Was this review help?
2
4
Share
VanJulian
08/12/25 4:09pm
When I took the subject two test last year, I was quite nervous after failing the first time, but the instructor explained that the retest wasn’t conducted on the same day. Each test center has fixed scheduling periods, and once the exam ends, you have to wait for a new appointment opportunity. This is mainly due to management needing time to avoid chaos. I recommend immediately communicating with the driving school—they will help arrange your next test, usually within a few days to a week. Don’t worry; use these days to practice the areas where you made mistakes. That’s exactly what I did, and I passed smoothly the second time. Remember, failing the test is normal—the key is to learn from it, prepare more thoroughly, and don’t expect to retake it on the same day.
Was this review help?
13
5
Share
Expand All
VanDeclan
10/03/25 2:14am
As a coach who frequently trains students, I fully understand your concerns about this matter. The retake for Subject 2 is definitely not scheduled on the same day. After failing the test, the system records the status, and you must pay the fee to rebook through the platform or driving school. The waiting time varies by region, typically three to seven days. This is to ensure order and fairness at the test site. It's best for students to contact me or the relevant staff promptly to arrange the retake, while also focusing on practicing weak areas such as reverse parking or parallel parking. Don't stress—most students pass on their second attempt, with the key being maintaining a stable mindset.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What type of engine oil is used in Mingtu 4S stores?

Mingtu 4S stores use fully synthetic engine oil. It is recommended to use the engine oil model specified in the maintenance manual, as this model is most suitable for the engine. Introduction to gasoline: Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, with a distillation range of 30 to 220 degrees Celsius. Its main components are C5 to C12 aliphatic hydrocarbons and naphthenes, along with a certain amount of aromatic hydrocarbons. Gasoline has a high octane number (anti-knock combustion performance) and is classified into grades such as 89, 90, 92, 93, 95, 97, and 98 based on octane ratings. Characteristics of gasoline: The main characteristics of gasoline are volatility, stability, anti-knock properties, corrosiveness, and cleanliness.
3
5
Share

Is it okay to service the Mazda 3 Axela once a year?

It's best to service the Mazda 3 Axela every six months. Automobile maintenance: Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the automobile, also known as automobile servicing. Maintenance scope: Modern automobile maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Maintenance purpose: The purpose of automobile maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
16
5
Share

How long does it take to fully charge the battery when the Geely Emgrand engine is running?

It takes about half an hour to fully charge the battery when the Geely Emgrand engine is running. Charging via the switch circuit: The battery power consumed during startup is recharged through the vehicle's switch circuit. Charging can occur while idling, but the charging current is relatively small. If the battery is completely drained, idling for half an hour after jump-starting the engine will allow you to check the dashboard for charging status. Charging conditions: Generally, car batteries are rarely charged only when completely depleted, so charging times vary between vehicles. If the battery is indeed fully discharged, it typically requires about 12 hours of charging. The exact time depends largely on the battery's condition. Additionally, charging a car's starter battery usually takes around 20 hours.
6
1
Share

What grade of gasoline does the Pajero use?

The Pajero uses 92 octane gasoline. Gasoline anti-knock properties: The anti-knock substance in gasoline is isooctane. The ability of gasoline to resist knocking when burning in the engine is its anti-knock property. The octane rating of 92 or 95 represents the fuel's anti-knock property. The higher the octane number, the greater the isooctane content, indicating better anti-knock performance. Gasoline anti-knock value: Different engines require different anti-knock values. Similarly, different octane grades of gasoline are suitable for engines with different compression ratios. The higher the compression ratio, the higher the octane grade of gasoline required. Gasoline compression ratio: The compression ratio indicates the degree to which the gas in the cylinder is compressed when the piston moves from the bottom dead center to the top dead center.
4
0
Share

Where is the blower fuse located in the Honda CR-V?

The fuse for the Honda CR-V is located in the fuse box at the upper right corner of the engine compartment, below the steering wheel. Fuse Box: The automotive fuse box is used to install car fuses. According to the size of the fuses, it can be divided into: small automotive fuse box; medium automotive fuse box; large automotive fuse box. Proper Fuse Replacement: Replace the fuse according to the rated current value indicated on the fuse box cover. Do not replace it with a fuse that has a higher current rating. Emergency Situations: If there are no spare fuses available, in an emergency, you can replace it with a fuse from another device that does not affect driving or safety.
14
1
Share

Where is the tire pressure switch for the Changan CS55 Plus Blue Whale Edition?

The Changan CS55 Plus Blue Whale Edition does not have a tire pressure switch, as its function does not require manual activation. The system automatically turns on as soon as the vehicle starts. Introduction to Tire Pressure Monitoring: Tire pressure monitoring automatically and continuously checks the tire pressure while the car is in motion, alerting the driver to any leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure readings for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure monitoring relies on calculating the rolling radius of the tires to detect pressure changes. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect monitoring. It equips two diagonally opposite tires with direct sensors and includes a four-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.