···
Log in / Register

Is the Subject 1 Retake on the Same Day?

4 Answers
VanRafael
07/29/25 10:55am
Subject 1 retake is on the same day. If you fail the first attempt of Subject 1, you cannot retake it immediately. You need to go to the information registration area to swipe your ID card again, and then follow the computer prompts to proceed to the designated seat for the second attempt. If you still fail the second attempt, you will need to leave the examination room and reschedule. Subject 1 Exam Content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; basic knowledge of safe driving and civilized driving; basic knowledge related to motor vehicle driving operations. Subject 1 Passing Score: The total duration of the Subject 1 exam is 45 minutes, consisting of 100 questions in the form of true/false and multiple-choice questions. The full score is 100, with a passing score of 90. The exam questions are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations."
Was this review help?
8
2
Share
ParkerLynn
08/13/25 4:36pm
When I took the first driving theory test (Subject 1), I failed the first attempt and immediately wanted to retake it. However, the staff told me it wasn't possible and that I had to wait a few days to schedule a retest. Later, I learned that retests usually aren't offered on the same day—there needs to be an interval of at least 10 working days to give candidates time to review their mistakes. I used the 'Driving Test Prep' app, practicing for over an hour daily, and passed the retest a week later. If you fail, don't rush to retake the test immediately. The key is to spend more time consolidating your knowledge, as rushing in unprepared can lead to another failure. You can schedule a retest conveniently on the DMV website or app, where you can also choose a suitable time slot. My advice is not to panic after failing—use this opportunity to improve your chances of passing.
Was this review help?
10
2
Share
Expand All
SanBrianna
10/07/25 7:53am
Back when our generation was taking the driver's license test, if you failed the subject one exam, you could retake it the same day. Now the policy has changed, and retakes are usually scheduled several days or even more than a week later. This might be to discourage impulsive retakes and encourage calm study. My son took the test the year before last, and after failing, he had to wait almost two weeks for the retake. He used that time to do more mock exams, which worked out well. Regulations vary by location—for example, appointments are quicker in first-tier cities, while second- and third-tier cities might have longer waits. The DMV has an online system to check schedules, and the fees are similar to the initial test. Remember, the theory test is foundational, so it's safer to prepare thoroughly before retaking.
Was this review help?
2
4
Share
Expand All
Annabeth
11/21/25 2:29am
The make-up test for Subject 1 is usually not on the same day. You need to wait and reschedule, typically with available slots a few days to a week later. Don't be discouraged if you fail; use the interval to strengthen your review, such as downloading a driving test app and practicing more with the wrong question sets. The system's delay is designed to give you ample time to prepare. Consult your driving school or log in to the Traffic Management 12123 platform to check specific arrangements. Before the next test, ensure you have mastered the traffic rules.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.