Is the Subject 1 Mock Test the Same as the Real Exam?

1 Answers
AlainaFitz
07/30/25 10:14am
There is little difference between the Subject 1 mock test and the actual exam; the 100 questions in the on-site Subject 1 exam are randomly selected from the question bank, and the Subject 1 mock test also draws from the mock question bank. Although the questions are not identical, the types are the same, with the same proportion of true/false questions and multiple-choice questions. Subject 1 Exam Content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving basics; basic knowledge related to motor vehicle driving operations. Subject 1 Exam Method: Computer-based test. Passing Score for Subject 1: The total time for the Subject 1 exam is 45 minutes. The test paper consists of 100 questions, including true/false and single-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Norms".
Was this review help?
17
1
Share
More Forum Discussions

How to Remove Adhesive Residue from Car Window Film?

The method to remove adhesive residue from car window film is: 1. First, apply some essential balm onto the residual adhesive on the glass. 2. Use your fingers to spread the essential balm around the edges of the adhesive marks. 3. Then, let it sit for ten minutes. 4. After that, gently scrape off the residual adhesive from the glass with a blade. 5. At this point, the adhesive marks on the glass can be completely removed. Additional Information: 1. Car windows are an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. 2. The structure of car windows is typically curved and enclosed, with rubber sealing strips connecting the window frame and the glass. These sealing strips provide both sealing and cushioning effects to prevent damage to the windshield when the window frame deforms due to stress on the vehicle body.
12
0
Share

Where is the Wrangler SUV produced?

Jeep Wrangler is an Italian brand, but after being acquired, it is produced by Chrysler in the United States. The relevant introduction of Jeep Wrangler is as follows: 1. Design: Since its inception, the Jeep Wrangler has been highly sought after by off-road vehicle enthusiasts worldwide. It features a boxy, rugged body appearance with large front and rear wheel arches. The front end still retains the family-style seven-slot grille and round headlight design. 2. Configuration: The Jeep Wrangler is equipped with both soft and hard tops, including a three-piece hard top, striving to provide owners with the joy of driving a convertible in an off-road vehicle. The soft top is very convenient to use—it can be folded or rolled up, making it suitable for use in hot weather.
16
3
Share

Is the left turn signal down or up?

The left turn signal is down. The turn signal is an important indicator light that is turned on when a motor vehicle is turning to alert vehicles and pedestrians in front, behind, left, and right. The turn signal tube uses a xenon tube, controlled by a single-chip microcomputer circuit, with alternating left and right flashing for uninterrupted operation. The turn signal uses a flasher to achieve light blinking, which can mainly be divided into three types: resistance wire type, capacitor type, and electronic type. Precautions for using turn signals: 1. Turn off the hazard lights before using the turn signal: Many vehicle models do not have turn signal priority, so if you need to use the turn signal while the hazard lights are on, you should first turn off the hazard lights before operating the turn signal switch; 2. Quickly identify if the turn signal is faulty: Turn signals are divided into contact-type flashers and non-contact-type flashers. When a contact-type turn signal fails, the corresponding indicator light on the dashboard will not blink, while when a non-contact-type turn signal fails, the blinking frequency of the corresponding dashboard indicator light will increase.
10
3
Share

Does the Focus have an anti-collision steel beam?

The Focus is equipped with an anti-collision steel beam. The high-strength anti-collision steel beam built into the front bumper of the Focus is made of hot-pressed ultra-high-strength steel plate imported from a Swedish stamping factory, with a tensile strength of 980Mpa. The front corrugated steel plate is specifically designed to absorb energy, and its effectiveness is superior to that of non-corrugated steel plates. Behind the steel plate, there is also a square steel beam structure that can resist impact, while the structure connecting to the car body can also absorb and cushion the impact. The Focus is a compact car under Changan Ford. Taking the Focus 2021 Sedan 1.5L Manual Fengyue model as an example, the car body adopts a 4-door, 5-seat structure with a fuel tank capacity of 53 liters. In terms of power, the Focus 2021 Sedan 1.5L Manual Fengyue model is equipped with a 1.5L inline three-cylinder naturally aspirated engine, with a maximum power of 90kW and a maximum torque of 153Nm, matched with a 6-speed manual transmission.
8
0
Share

Why is there no sound in the Roewe RX5 navigation system?

The Roewe RX5 navigation system may have no sound due to loose wiring caused by vehicle vibration during driving, or it could be a damaged navigation device. Below are relevant details: 1. Features: The Roewe RX5 is equipped with the Zebra Zhixing multimedia system version 2.0, offering rich human-machine interaction capabilities. Mainstream configurations are concentrated in mid-to-high trim models, while low-to-mid trim models still target family consumers. 2. Actual fuel consumption: The Roewe RX5 has a combined fuel consumption ranging between 6.8–10.0L, which is relatively good. Actual fuel consumption may vary depending on vehicle usage conditions and driving habits. 3. Model comparison: The Roewe RX5 has two displacement models: 1.5L and 2.0L, with a total of 19 different configuration versions available for consumers to choose from.
19
1
Share

Can Alcohol Be Added to Windshield Washer Fluid?

Alcohol should not be added to automotive windshield washer fluid. The main reasons are: 1. Alcohol is a flammable substance with strong volatility. 2. The vapor it releases can form an explosive mixture with air. If exposed to high temperatures or open flames, it may cause combustion or explosions, leading to severe consequences. Additional Information: The functions of automotive windshield washer fluid include: 1. Antifreeze properties: It significantly lowers the freezing point of the liquid, thus preventing freezing and quickly dissolving frost. 2. Anti-fog properties: It forms a monomolecular protective layer on the glass surface, preventing fog droplets and ensuring clear visibility. 3. Anti-static properties: After cleaning with the fluid, substances adsorbed on the glass surface eliminate static charges, providing anti-static effects. 4. Lubrication properties: Its higher viscosity provides lubrication, reducing friction between the wiper and glass to prevent scratches. 5. Anti-corrosion properties: The fluid contains various corrosion inhibitors, making it safe for all metals, car paint, and rubber without any corrosive effects.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.