Is the Subject 1 Driving Test Difficult?

3 Answers
TimothyMarie
08/26/25 3:17am
Subject 1 test covers theoretical driving knowledge, road safety laws and regulations, local traffic rules and related content. As a purely theoretical examination with standardized question banks available through driving test preparation apps, it generally doesn't present excessive difficulty. Below are specific details about Subject 1 test: 1. Grading criteria: For C1 license, the system uses a 900-question pool where 100 questions are randomly selected by computer, with 90+ points (inclusive) required to pass. 2. Test precautions: Arrive early to avoid tardiness; Listen carefully to exam rules to prevent violations; Before starting, verify computer display for abnormalities and report promptly if any; Note that some test centers use mouse input while others employ numeric keypads - examinees should read input device instructions to avoid operational errors.
Was this review help?
7
1
Share
DelNatalie
09/08/25 3:44am
I recently passed the written driving test (Subject 1) and found it not too difficult. The key is to stay focused and prepare seriously. As a college student, I made time every day to practice questions on driving test apps. After a week of consistent practice, I could handle them with ease. The questions mainly cover traffic rules and signs, which become second nature after repeated practice. I recommend downloading a few popular apps, doing more mock tests, and reviewing mistakes thoroughly. The whole process emphasizes memory and understanding rather than rote memorization. Plus, most apps now have explanation features—just tap on any question you don't understand to learn the rules. Stay relaxed and don't stress too much; most people can memorize the content in two or three days. In short, practice diligently, and the exam will go smoothly.
Was this review help?
13
3
Share
Expand All
SanIsla
10/22/25 3:45am
When I was getting my driver's license, the written test (Subject 1) went smoothly, thanks to my years of driving experience which really helped. Looking back, the exam content was all about traffic signals and road rules you see every day, so it wasn't too complicated to understand. The key is to focus on high-frequency test points like lane rules and speed limit signs, and practice with mock questions regularly. Don't overdo it—100 questions a day is enough, just keep it consistent. If you come across unclear concepts, look them up on your phone or watch explanatory videos, but don't rush. After driving, I found this knowledge practical—it helps reduce accidents. Remember the method: stay focused, avoid distractions, and don't stay up late studying to maintain good condition. It's not hard, just takes some time to get familiar.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

Where is the coolant temperature gauge on the Rena?

The Rena does not have a coolant temperature gauge, only a temperature warning system is retained. Taking the 2020 Rena as an example, it belongs to the subcompact car category with body dimensions of: length 4300mm, width 1705mm, height 1460mm, wheelbase 2570mm, fuel tank capacity 43L, and curb weight 990kg. The 2020 Rena features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L naturally aspirated engine producing maximum power of 95PS (70kW) and maximum torque of 132.4Nm, paired with a 5-speed manual transmission.
14
0
Share

How to Identify Car Gears?

P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport Mode), L (Low Gear). Below is a detailed introduction to car gears: 1. P Gear is the Parking Gear: When the gear lever is in the P position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake, and it is generally used for long-term parking of the car. When engaging the P gear, the car must be completely stationary. Do not engage the P gear when the car is not fully stopped, and always apply the handbrake. When parking on a slope, you need to apply the handbrake first and then engage the P gear. 2. R Gear is the Reverse Gear: When the gear lever is in the R position, the rotation direction of the transmission output shaft is opposite to that of the engine, allowing the car to move backward. When engaging the R gear, the car must be completely stationary. Do not engage the R gear when the car is not fully stopped. 3. N Gear is the Neutral Gear: When the gear lever is in the N position, the gears inside the transmission are in an idle state, and the clutch is not engaged. The load on the transmission is minimal at this time. The N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in the N gear when the car is being towed. 4. D Gear is the Driving Gear: When the gear lever is in the D position, the gears inside the transmission automatically switch between the lowest and highest gears according to the set shifting rules, based on factors such as vehicle speed and throttle opening. In most cases, you can drive using the D gear.
7
0
Share

Are Automatic Transmissions Prone to Failure?

Automatic transmissions do not easily fail during daily use. Here are some relevant details: 1. The internal structure of an automatic transmission is relatively more complex compared to a manual transmission, which means it requires more attention to maintenance during daily use. The primary aspects of maintaining an automatic transmission include ensuring the quality of the lubricating oil and avoiding operation under overload conditions to prevent overheating and aging of internal components. Due to its complex structure, transmission fluid plays an even more critical role. 2. In daily vehicle use, most automatic transmission failures stem from issues with the transmission fluid. Besides lubrication and cooling, automatic transmission fluid also assists in power transfer. If the fluid is not replaced for extended periods, impurities and sludge can accumulate, reducing its lubrication effectiveness and increasing wear on components like gears.
5
4
Share

What to Do When Mercedes-Benz Seat Adjustment Fails?

Reasons for Mercedes-Benz seat adjustment failure: 1. Electric seat jamming or seizing up. The seat adjustment linkage needs lubrication. 2. Wiring issues. Check the fuse first, then inspect if the seat motor is functioning properly. 3. Adjustment linkage or slide rails are blocked or lack lubrication. Automotive seats should meet the following requirements: 1. The arrangement of seats within the entire cabin should be reasonable, especially the driver's seat must be in the optimal position. 2. The seat's design must comply with human physiological functions, ensuring comfort while striving for aesthetics. 3. Seats must be safe and reliable, with sufficient strength, stiffness, and durability, featuring a compact structure and minimizing weight as much as possible. 4. Various adjustment mechanisms designed for passenger comfort must have reliable locking devices to ensure safety.
17
0
Share

Can a sedan be equipped with a roof rack?

Sedans can be equipped with roof racks. The installation method for roof racks is as follows: 1. Choose a suitable roof rack; 2. Thoroughly clean the roof surface. If there are no pre-installed screws on the roof, adhesive-type roof racks can be installed; 3. Find symmetrical and suitable positions, ensuring balance both front-to-back and side-to-side; 4. Slowly peel off the adhesive backing of the roof rack, stick it to the roof, and press firmly for more than 10 minutes to allow the adhesive to bond properly. Precautions for using roof racks include: 1. Ensure cargo is tightly secured or properly fixed on the rack and evenly distributed; 2. Use non-elastic ropes to tie down the luggage; 3. Pay special attention when carrying large items on the roof rack.
20
1
Share

Why Are Car Bumpers Made of Plastic?

The reasons why car bumpers are made of plastic are: 1. Consideration for pedestrian safety; 2. Practical usage considerations; 3. Facilitation of vehicle design and production. The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the vehicle body and passenger safety. Plastic bumpers are manufactured using polyester and polypropylene materials through injection molding. They consist of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin steel sheets (approximately 1.5mm thick) into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then bolted to the vehicle frame's longitudinal beams, allowing for easy removal when necessary.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.