Is the study-based point reduction applied before or after processing?

1 Answers
DelJuniper
07/29/25 7:55pm
After processing. Below is relevant information about study-based point reduction: Definition: A measure where drivers holding a driver's license who have been penalized with demerit points for traffic violations can have their points reduced after completing online traffic safety education and passing the exam. Study-based point reduction is a traffic management convenience measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Legal basis: Issued "Regulations on Reducing Points for Road Traffic Violations Through Traffic Safety Education (Trial)", Article 5 stipulates that motor vehicle drivers applying to participate in point reduction through traffic safety education must attend corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities according to their highest permitted vehicle class.
Was this review help?
5
4
Share
More Forum Discussions

Can You Still Drive When a Triangle with an Exclamation Mark Appears on the Car?

A triangle with an exclamation mark indicates a malfunction in the car's regular performance, components, or functions. It is advisable to inspect the issue first to avoid potential safety hazards. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating brake system failure or low brake fluid level. Immediate inspection of the brake system is required to prevent accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark indicates a lighting fault warning light, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
6
0
Share

Head-First Parallel Parking Techniques

The head-first parallel parking technique involves keeping the steering wheel turned fully to the right while reversing slowly. Here are the detailed steps: 1. Keep the steering wheel fully turned to the right and reverse slowly: When you can see the front of the car behind you completely in the left side mirror, quickly turn the steering wheel from full right to full left and continue reversing. 2. Use the adjusted right side mirror: Pay attention to the distance between the right rear wheel and the curb. Adjust the car's reversing path by steering to get as close to the curb as possible while maintaining enough distance to straighten the car body. The distance between the wheel and the curb.
20
3
Share

Can I Take the Subject Two and Subject Three Driving Tests with an Expired ID Card?

You cannot take the Subject Two and Subject Three driving tests with an expired ID card. Below is relevant information about the Subject Three driving test for motor vehicle drivers: 1. Introduction One: Completing the test items while driving a motor vehicle on the road. 2. Introduction Two: Compliance with traffic laws and regulations. 3. Introduction Three: Comprehensive control of the motor vehicle. 4. Introduction Four: Proper use of lights, horn, seat belts, and other devices. 5. Introduction Five: Correct observation and judgment of road traffic conditions. 6. Introduction Six: Safe driving behavior and awareness of civilized driving.
17
0
Share

How to Reset the Tire Pressure Warning Light on Lavida

Here are the methods to reset the tire pressure warning light on Lavida: 1. If you have changed the tire inflation pressure or replaced the wheels, turn on the ignition. 2. Press and hold the SET button of the tire pressure monitoring system. 3. Wait until the indicator light on the dashboard illuminates. 4. Confirm that the new parameters are stored and the light goes off, indicating the tire pressure monitoring system has been reset. Below are the reasons why the tire pressure warning light cannot be reset: 1. The tire inflation pressure is too low. 2. The tire structure is damaged. 3. The vehicle is carrying a load on one side. 4. The wheels on an axle are overloaded.
14
0
Share

How to Adjust Car Audio for the Best Sound Effect?

Methods for adjusting car audio effects: 1. Additional functions: Reset all additional functions of the car stereo to factory settings, then set the treble, midrange, and bass to the middle position. 2. Stereo debugging: Turn on the stereo and adjust the volume to slightly more than half, which makes it easier to blend the bass with the mid-bass of the front sound field, resulting in fuller bass. 3. Front sound field debugging: Lower the stereo volume, insert a vocal disc or a disc with strong bass, then gradually increase the volume until it is slightly louder than normal listening levels. 4. Rear sound field tuning: Set the rear sound field to HP mode and adjust the Crossover to around 150HZ.
2
3
Share

Will the 4S shop refuse to change the engine oil?

4S shops generally do not have this situation, and many 4S shops already have monitoring functions. The following is the relevant introduction of engine oil: The role of engine oil: That is, engine lubricating oil, known as the "blood" of the car, can lubricate, clean, cool, seal, reduce wear, prevent rust, and prevent corrosion for the engine. Working temperature of engine oil: The engine is the heart of the car. There are many metal surfaces in the engine that rub against each other. These parts move fast and have a poor environment, and the working temperature can reach 400 to 600 degrees. Under such harsh working conditions, only qualified lubricating oil can reduce the wear of engine parts and extend their service life.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.