···
Log in / Register

Is the speed limit on Quannan Expressway 100 or 120?

6Answers
StAnna
07/24/2025, 01:24:51 AM

Quannan Expressway has a speed limit of 100. Precautions for driving on expressways are as follows: Check for potential hazards before getting in the car; Concentrate on driving; Avoid fatigue driving; Maintain a safe speed; Request instructions early and report late; Be careful when driving at night; Handle tire blowouts correctly. Try not to occupy the outermost lane for long periods of time. Here is additional information: Relevant regulations: According to China's Road Traffic Safety Law, it is clearly stipulated that road traffic safety work should follow the principles of legal management and convenience for the public, ensuring orderly and safe road traffic; It is also important to note that motor vehicles that have reached the scrapping standard are not allowed to drive on the road. Article 21 of the Road Traffic Safety Law states that before driving a motor vehicle on the road, the driver should carefully inspect the safety technical performance of the motor vehicle.

Was this review help?
103
Share
ZoeRose
08/10/2025, 07:27:29 PM

I've driven on the Quannan Expressway several times, and the speed limits feel quite complex. Different sections have different limits—some are 120, others 100—depending on the specific location. For example, the mountainous stretch from Quanzhou to Sanming has many curves and long, dark tunnels, mostly limited to 100 km/h. I remember last year near Anxi, there was a 100 sign on the bridge, but on the flat, straight section around Xiamen's ring road, it changed to 120. The most practical approach is to keep an eye on the road signs while driving, as navigation apps sometimes aren't updated in time. Also, watch out for weather changes—sections prone to landslides during rain might suddenly have reduced speed limits. I learned that the hard way. Safety first—rather than worrying about specific numbers, it's better to get into the habit of checking road signs regularly.

Was this review help?
9
Share
Expand All
AndrewFitz
09/24/2025, 02:41:00 AM

Actually, the speed limit on highways isn't a fixed value, and the Quannan Expressway is a typical example. I've studied highway design standards - mountainous roads with numerous curves and steep gradients are generally set below 100km/h. For instance, the section from Longyan to Zhangping has a consistent 100km/h limit, dropping to 80km/h in tunnels. However, some plain sections in Jiangxi Province do allow 120km/h, depending on your exact location. I recommend checking your route in advance using map apps, as many navigation systems mark segmented speed limits. For long-distance driving, it's advisable to carry a dash cam to stay calm when encountering mobile speed checks. Most importantly, maintain a safe following distance - even the best vehicles can lose control in complex road conditions.

Was this review help?
3
Share
Expand All
VanJulia
11/07/2025, 09:04:44 PM

Every driver knows the speed limits on the Quannan Expressway are inconsistent—I just drove it last week. The section from Quanzhou to Nan'an has smooth road conditions, and the 120 km/h limit is reasonable. But as soon as you enter Dehua County, it drops to 100 km/h due to the winding mountain roads. From what I've observed, special speed limit signs are posted near tunnels, bridges, and merging points. I recommend using your phone to snap photos of key speed limit signs, like the 100 km/h marker 500 meters before the Datian Tunnel. With so many speed cameras nowadays, it's not worth risking a ticket—6 points and a 200 RMB fine. Honestly, driving at 100 km/h is more relaxing; you don’t even need to floor the accelerator, making the ride smoother and more comfortable.

Was this review help?
10
Share
Expand All
LeLilah
12/28/2025, 10:49:46 PM

I once asked a traffic officer at the highway entrance, and there's really no standard answer for the speed limit on Quannan Expressway. The design speed depends on terrain and geology. For example, the Yongchuan section has loose rock layers, so the 100 km/h limit is to prevent falling rocks, while the Zhangzhou plain has stable terrain with a 120 km/h limit. When driving, I usually focus on three key spots: there's always a speed reduction sign before entering a tunnel, speed limit signs are often posted at both ends of viaducts, and you must slow down at service area exits. I recommend using Amap's average speed detection reminder feature—it's quite accurate in practice. Don't just memorize numbers; once during rain, I encountered a temporary 80 km/h limit and was lucky to react quickly. Safety margins are crucial—driving at 110 km/h is much safer than pushing 120 km/h.

Was this review help?
19
Share
Expand All
SanHarper
03/26/2026, 01:32:35 AM

Long-distance drivers are all familiar with the speed limit patterns on the Quannan Expressway. When I depart from Quanzhou, the speed limit is 120 km/h, but it drops to 100 km/h upon entering Sanming City, and then rises back to 120 km/h at the Jiangxi border. Pay attention to two details: the blue road signs with numbers are always accurate, and the speed limit stickers on the green kilometer posts are updated the fastest. I usually use cruise control and release the brakes in advance when approaching changing speed zones. For new cars, I recommend installing a tire pressure monitoring system to stay calm during sudden braking. Actually, driving at 100 km/h is more fuel-efficient—my SUV saves 2 liters per 100 kilometers. A special reminder: drive slower during the rainy season, as speed limit signs in waterlogged sections are often obscured by leaves.

Was this review help?
10
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.