Is the SLS AMG considered a supercar?

What are the electric sedans of Chery?

Chery electric sedans include: Chery eQ1 Ant, Tiggo 3xe, Arrizo 5e, Chery eQ. Taking the Tiggo 3xe as an example: This vehicle is Chery's first pure electric SUV, based on the Tiggo 3x. In terms of body dimensions, its length, width, and height are 4200mm, 1760mm, and 1570mm respectively, with a wheelbase of 2555mm, positioning it as a compact SUV. The Tiggo 3xe comes in two range versions. The Chery Tiggo 3xe400 model uses a ternary lithium battery pack with a capacity of 49kWh, achieving an energy density of 125.6Wh per kilogram, with a comprehensive range of up to 351km. The Chery Tiggo 3xe480 model uses a ternary lithium battery pack with a capacity of 54.3kWh, achieving an energy density of 150.8Wh per kilogram, with a comprehensive range of up to 401km.

16

3

Share

Should the front windshield be tinted?

Front windshields need to be tinted. Because the front windshield is the most exposed to sunlight and requires explosion-proof protection. However, the tint should not be too dark, as it may affect the driver's visibility and make it difficult to see the road ahead. Here is more information about window films: 1. The front windshield is the main area that best reflects the performance of automotive explosion-proof and heat-insulating films, including explosion-proof, UV resistance, heat insulation, and anti-glare properties. 2. High-quality, highly transparent films should be selected. According to the 'Technical Specifications for Safety of Power-Driven Vehicles Operating on Roads' GB7258—2012, implemented on September 1, 2012, 'The visible light transmittance of the windshield and other glass areas in the driver's line of sight must be greater than or equal to 70%, and no mirrored reflective sunshade films are allowed on any window glass.' Therefore, front windshield films with a transmittance of over 70% and a visible light reflectance below 10% can be applied without significantly affecting driving visibility. 3. In terms of clarity, regardless of the film's darkness, high-quality films allow visibility of objects approximately 6 meters away at night, while inferior films create a blurry effect.

9

0

Share

Does Revving in Neutral Gear Damage the Car?

Revving in neutral gear does not damage the car, because in neutral state, the engine load is small and natural wear is minimal. However, revving in neutral consumes a lot of fuel, typically about 6 milliliters per rev, with engine speed reaching 4,000 to 5,000 RPM or even higher, equivalent to driving hundreds of meters at 160 km/h. Here is a brief introduction about neutral gear: Neutral gear refers to the state where the vehicle's gear lever is not engaged in any forward or reverse gear, and the transmission is completely separated from the engine. For manual transmissions, neutral is in the middle position, while for automatic transmissions, it is marked with an "N".

7

5

Share

What is the speed of a motorcycle?

Household motorcycles can reach a top speed of around 90 kilometers per hour, while motorcycles with a displacement of around 500cc can achieve a top speed of approximately 170 kilometers per hour. High-performance motorcycles with a displacement of around 1000cc can reach speeds between 300 to 400 kilometers per hour. More detailed information is as follows: 1. Common motorcycles on the road typically have a displacement between 100 to 150cc, and their top speed usually does not exceed 100 kilometers per hour. 2. It is not recommended to test the maximum speed of a motorcycle on public roads, as this is illegal. 3. It is advised to always wear a helmet when riding a motorcycle, and preferably to wear professional riding gear and protective equipment, which can significantly enhance safety during the ride. 4. When riding a motorcycle, do not occupy non-motor vehicle lanes, avoid speeding, and always obey traffic signals. Never ride under the influence of alcohol or exceed the speed limit. 5. During regular use, ensure timely maintenance of the motorcycle. Motorcycle maintenance is relatively simple, mainly involving the replacement of engine oil and some wear-prone parts. When selecting engine oil, choose one that is suitable for your motorcycle's engine.

9

2

Share

What is the purpose of the antenna on a car?

Car antennas are primarily used on vehicles to receive external signals, serving as tools for external communication and receiving radio wave information. Below is more information about car antennas: 1. Car antennas, also known as vehicle-mounted antennas, are generally used for the car's radio and broadcasting stations. They can be categorized into built-in and external antennas. However, depending on the vehicle's purpose, other types of antennas may be installed. For example, buses may have DVB-T antennas or onboard TV antennas, while logistics vehicles and taxis may be equipped with GSM antennas or GPS satellite antennas. Radio and broadcasting antennas mainly include AM/FM antennas, soft PCB digital antennas, and AM/FM/TV antennas. Depending on their function and purpose, the frequency of the antennas used varies. 2. In terms of structure, vehicle-mounted antennas can be shortened type, quarter-wavelength, center-loaded type, five-eighths wavelength, or double half-wavelength antennas. Theoretically, their efficiency increases in this order, and the length of antennas operating in the same frequency band also increases accordingly. Due to the vehicle's height limitations and the wind resistance caused by excessively long antennas during high-speed travel, as well as issues when passing under bridges or entering underground parking lots, vehicle antennas are not necessarily better if longer. Generally, car antennas should not exceed 70 cm, and antennas for vans should be even shorter. Shortened antennas are compact and, although they have lower gain, are suitable for situations where antenna concealment is required.

13

4

Share

How to lock a keyless entry car?

There are two types of keyless models. Here are the locking methods for keyless entry: 1. Door handle button: There is a button on the door handle that can be pressed or touched to lock or unlock the car. For this type, you can directly lock the car and then pull the door handle to confirm whether the vehicle is locked. 2. Door handle protrusion: There is a row of small protrusions on the door handle. Touching this protrusion will lock the car, and inserting your hand into the door handle will unlock the vehicle. For models without this sensing feature, you can check whether the side mirrors are folded or pull the rear door handle to confirm if the vehicle is locked.

17

1

Share

Is the SLS AMG considered a supercar?

What are the electric sedans of Chery?

Should the front windshield be tinted?

Does Revving in Neutral Gear Damage the Car?

What is the speed of a motorcycle?

What is the purpose of the antenna on a car?

How to lock a keyless entry car?

Can You Continue Driving When the Car's EPC Light Is On?

Should the cracked front wheel liner be replaced?

What's the matter with the navigation screen being black but still having sound?

What is the difference between aluminum alloy and cast iron cylinder blocks?