Is the seventh-year vehicle subject to on-site inspection or exempt from inspection?

1 Answers
LaBraxton
07/29/25 6:13pm
The seventh-year vehicle should undergo an on-site inspection. Below is detailed information about vehicle annual inspections: 1. Overview: Vehicle annual inspection refers to the annual examination of vehicles that have obtained formal license plates and registration certificates, conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle remains in good condition, and guarantee driving safety. 2. Others: For passenger transport vehicles, inspections are conducted once a year within the first five years. After five years, inspections are conducted every six months. For cargo vehicles and large or medium-sized non-passenger transport vehicles, inspections are conducted once a year within the first ten years. After ten years, inspections are conducted every six months. Vehicle annual inspections are divided into initial inspections and periodic inspections.
Was this review help?
1
0
Share
More Forum Discussions

What Causes Automatic Transmission Vehicles to Shake When Starting?

Automatic transmission vehicles may shake when starting due to the following reasons: 1. Engine misfire: This primarily refers to one or more cylinders in the engine not functioning properly, causing intermittent exhaust gas flow and noticeable shaking of the exhaust pipe, sometimes accompanied by abnormal noises; 2. Worn or loose engine mounts: These components are designed to reduce vibrations and absorb shocks during engine operation, while also securing the engine in place; 3. Carbon buildup issues: Including carbon deposits in the cylinders, throttle body, spark plugs, and intake system. Excessive carbon buildup inside the engine can affect ignition energy, air intake efficiency, and the air-fuel mixture ratio, leading to unstable power output; 4. Fuel system malfunction: Using an incompatible fuel grade can result in reduced vehicle power output.
20
1
Share

How to Fold Down the Seats in a Corolla?

To fold down the seats in a Corolla, follow these steps: The seat adjustment switch is located at the base. There is a recessed handle at the junction between the seat and the seatback. Pull the recessed handle upward and hold it while pushing the seatback backward to complete the folding operation. The Corolla is a compact car from Toyota, with dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. It features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is powered by a 1.2T four-cylinder engine, delivering a maximum power of 116 horsepower and a peak torque of 185 Nm.
1
5
Share

What causes occasional lack of acceleration when pressing the gas pedal?

The reasons for occasional lack of acceleration when pressing the gas pedal include: 1. Throttle issues or excessive carbon buildup on the throttle; 2. Fuel supply system malfunction; 3. Poor fuel quality. The solutions for occasional lack of acceleration when pressing the gas pedal are: 1. Check fuel pressure and cleanliness, replace the fuel filter; 2. Inspect the ignition system, spark plug wires, spark plugs, etc.; 3. Check cylinder pressure and whether the engine is misfiring; 4. Check if the intake and exhaust systems are unobstructed (catalytic converter blockage); 5. Verify ignition timing, throttle position sensor, idle control motor, etc.
13
4
Share

What is the horsepower of the Honda CBR600?

Honda CBR600 has a maximum horsepower of 120 hp. Definition of horsepower: Horsepower is a unit of power commonly used in engineering. Generally, it refers to metric horsepower rather than imperial horsepower. It is conventionally defined that 1 metric horsepower equals the work done to lift a 75-kilogram object 1 meter in 1 second. Metric horsepower specifies that 1 metric horsepower is the work done to complete 75 kilogram-force meters in 1 second. That is: 1 metric horsepower = 75 kilogram-force meters/second = 735 watts. Main characteristics of horsepower: Lightweight structure, easy to move, simple installation, minimal vibration, smooth operation, easy management, fuel-efficient, easy to start. It is currently the most widely used and highest-volume engine type, with good starting performance and low fuel consumption.
5
0
Share

What is the name of the Hyundai Verna?

Hyundai Verna is called Reina. Reina is a subcompact car under Beijing Hyundai, with dimensions of 4340mm in length, 1700mm in width, and 1460mm in height, and a wheelbase of 2570mm. It features a MacPherson strut front suspension and a torsion beam rear suspension, with a front-wheel-drive layout. The Reina comes standard with dual airbags, engine immobilizer, and a multifunction steering wheel across all variants. It is powered by either a 1.4L or 1.6L engine. The 1.4L engine delivers a maximum power of 78.7kW and a maximum torque of 135.4Nm, while the 1.6L engine produces a maximum power of 90.4kW and a maximum torque of 155Nm.
17
1
Share

What is the procedure for handling a traffic accident between two vehicles?

Two vehicles involved in a traffic accident should follow these procedures: 1. Single-party accident: Single-party accidents are relatively common in traffic incidents, referring to accidents that do not involve a third party. For example, if you reverse into a utility pole, in such cases, directly call your insurance company, wait for their assessor to take photos of the scene, and then proceed to a 4S shop for repairs. 2. Two-party accident: (1) If the accident occurs on a highway, do not stop or exit the vehicle. Drive into the emergency lane or a safe area (if the vehicle cannot be moved, leave the vehicle quickly while paying attention to safety from behind, and run into the emergency lane or a safe area), then call the police and report to the insurance company. (2) If the accident occurs on a regular city road, ensure personal safety first, turn on the hazard lights, and exit the vehicle to assess the accident situation. (3) Decide whether to settle privately based on the vehicle damage, personal circumstances, and mutual agreement. If settling privately, either pay or receive compensation, and both parties can leave. If not settling privately, handle the situation accordingly. 3. Hit-and-run by the other party (1) Remember the other party's license plate number and report the hit-and-run to the police. (2) The traffic police will check the other party's license plate information. (3) If the other party is using a fake, counterfeit, or scrapped license plate, report it to the insurance company as a single-party accident. The insurance will cover 70% of the cost, or you can stage the scene and then report to the insurance company. (4) If the other party can be found, report to the insurance company and let the traffic police and insurance company handle the case normally.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.