Is the Sagitar a product of FAW-Volkswagen?

1 Answers
Jack
07/29/25 8:19pm
Sagitar is a product of FAW-Volkswagen, a joint venture vehicle introduced and manufactured by FAW-Volkswagen. The 2019 Sagitar is equipped with two engine options: 1.2T and 1.4T, paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. The Sagitar showcases the essence of Volkswagen's German design with its smooth lines and dynamic proportions, winning user favor with its exquisite craftsmanship, rigorous manufacturing, and leading technology. The Sagitar's body dimensions are 4544mm in length, 1760mm in width, and 1461mm in height, with a wheelbase of 2578mm. Its fuel consumption ranges from 5.9L to 7.6L per 100 kilometers.
Was this review help?
6
4
Share
More Forum Discussions

How to reset the MG ZS after maintenance?

The maintenance light of the MG ZS cannot be manually reset after maintenance. You need to visit a 4S shop and have a technician use a diagnostic computer to reset it. The purpose of the maintenance light is to record the mileage of some important components. The dimensions of the MG ZS are 4323mm in length, 1809mm in width, and 1653mm in height, with a wheelbase of 2585mm. The fuel tank capacity is 45 liters, and the trunk capacity ranges from 359 to 1187 liters. This model is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163 PS and a maximum power of 120 kW. It is paired with a 6-speed automatic transmission. The front suspension type is MacPherson independent front suspension, and the rear suspension type is torsion beam non-independent rear suspension.
13
0
Share

What is the BMW X3 air filter replacement tutorial?

BMW X3 air filter replacement tutorial is: 1. Open the front passenger door and remove the glove box in front of the passenger seat; 2. Remove the clips of the air filter cover plate and pull out the cover plate; 3. Take out the old air filter and replace it with a new one; 4. Reinstall the cover plate and glove box. Taking the 2021 BMW 3 Series as an example, its body dimensions are: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, and fuel tank capacity 59l. The 2021 BMW 3 Series has a double-joint spring strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine with a maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 250nm, and is matched with an 8-speed automatic manual transmission.
13
5
Share

Why does the car feel not cool after replacing the air conditioning filter?

The reason is incorrect operation, such as the air conditioning switch not being turned on, the air outlet being closed, or the wind direction being incorrect. It could also be due to using the external circulation mode in hot weather. In short, it's necessary to identify the correct cause and then operate properly. Other reasons for the car not cooling: 1. Insufficient refrigerant: Sometimes, insufficient or too little refrigerant in the car's air conditioning system can cause the air conditioning not to cool. The main reason for insufficient refrigerant is usually minor leaks in the system. 2. Loose compressor drive belt: A loose compressor drive belt in the car's air conditioning system can cause slipping during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced delivery of compressed refrigerant, resulting in the car's air conditioning not cooling.
3
3
Share

Where is the fuel gauge sensor located on the BMW X3?

The fuel gauge sensors on the BMW X3 are located in two positions: 1. The left sensor is inside the fuel tank. Since the X3 has a saddle-type fully encapsulated fuel tank, if this sensor fails, the entire fuel tank must be replaced along with it. 2. The right sensor is located on the fuel pump and can be replaced separately. The BMW X3 is a mid-size SUV produced by BMW Brilliance. Its exterior dimensions are 4717mm in length, 1891mm in width, and 1689mm in height, with a wheelbase of 2864mm. The BMW X3 is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission. Its suspension system features a double-joint spring strut front axle and a multi-link independent rear suspension.
3
2
Share

What are the penalty standards for hill start and stop?

Penalty standards for hill start and stop are as follows: Front bumper not positioned on the line: After the vehicle stops, if the front bumper is not positioned on the pole line and the deviation does not exceed 50cm, a penalty of 10 points will be deducted. Vehicle rollback distance: If the vehicle rolls back more than 30cm during start-up, it is considered a failure. If the vehicle rolls back more than 10cm but less than 30cm during start-up, a penalty of 5 points will be deducted each time. Distance between the vehicle body and the road edge line: After the vehicle stops, if the distance between the vehicle body and the road edge line exceeds 50cm, it is considered a failure. After the vehicle stops, if the distance between the vehicle body and the road edge line exceeds 30cm but does not exceed 50cm, a penalty of 10 points will be deducted each time.
20
1
Share

How Many Years Is the Warranty for an Automotive Compressor Generally?

There is no mandatory national warranty policy for automotive compressors, and they are generally required to be warranted for at least one year. However, many automobile manufacturers provide a warranty for compressors for two years or longer. It is best to check the vehicle maintenance manual. Detailed introduction to automotive compressors: 1. Function: The role of an automotive compressor is to transform low-temperature, low-pressure gaseous refrigerant from the evaporator into high-temperature, high-pressure gaseous refrigerant through compression and send it to the condenser. 2. Working principle: The compressor in an automotive air conditioning system is directly driven by the engine through a belt-driven mechanism. When the compressor is not in operation, it can be disengaged from the engine via an electronic clutch. Normally, when the engine is running, the compressor does not work. Only when the air conditioner is turned on does the electromagnetic clutch engage the compressor with the pulley, and the cylinder compresses the refrigerant to circulate.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.