Is the Safety of the New Sylphy Very Low?

How to Use an Automatic Transmission?

Automatic transmission shifting methods are divided into: 1. Parking gear is P gear, when the car is parked, the gear lever must be moved to the P position. 2. Reverse gear is R gear. 3. Neutral gear is N gear, which can be used when starting, when the driver remains in the car, when parking, or when towing. 4. Driving gear is D gear, during normal driving, place the gear lever in the D position, and the car will automatically shift between forward gears. For automatic transmission vehicles, the gear must and can only be in P gear or N gear when starting the vehicle. If the gear is not in P or N, the vehicle will not start. Gear shifting precautions: 1. Do not shift to P gear at traffic lights, P gear is the parking gear, usually the key cannot be removed or the car cannot be locked without shifting to P gear; 2. Do not coast in neutral with an automatic transmission; 3. Never switch gears before the car comes to a complete stop.

18

3

Share

What does the exclamation mark on the car steering wheel mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, braking system fault light, transmission fault indicator light, and wiper fault indicator light. The following is a detailed introduction to the exclamation mark warning lights: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Main issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. Solution: It is necessary to go to a 4S shop for inspection, where professionals can identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Solution: The transmission oil needs to be replaced in time. Although it can be replaced independently, it is not recommended to do so. It is still necessary for professionals to replace different transmission oils according to different cars. Braking system fault: An exclamation mark inside a circle with parentheses. This represents a warning for the braking system, mainly indicating a fault in the braking system or low brake fluid level. Solution: First, check if the handbrake is released. If the fault light still displays after releasing it, you need to drive slowly to a repair shop for professional inspection. Abnormal tire pressure: An exclamation mark with a horizontal line under parentheses. This represents the tire pressure monitoring warning light. When the car's tire pressure is too low, this warning light will light up. Solution: If you have a tire pressure detector, you can check it yourself. If not, you need to go to a 4S shop for inspection and restore the tire pressure to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in the car lights. Solution: Go to a 4S shop for inspection and treatment as soon as possible. You can also check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. In addition, during the daily use of the vehicle, the fault lights displayed on the dashboard are divided into two different colors, yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. You need to slow down and drive to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. You should pull over and call for professional help to prevent unpredictable dangers to the vehicle and personal safety caused by forced driving. It should be noted that when the car is started, all lights will light up, and the system will perform an automatic detection. After the detection is completed, the lights will automatically turn off. If a light does not light up when the ignition is turned on, or if it stays on, or if it lights up while driving, it indicates a fault in the related system. In such cases, seek professional help for car inspection and elimination of potential safety hazards.

4

Share

How many kilometers can you drive when the car fuel light comes on?

When the fuel gauge light comes on, there are still 5-10 liters of fuel left in the car, which varies slightly depending on the displacement and fuel tank size of each model, as indicated in the vehicle's manual. For more details, see below: Can drive about thirty kilometers: Knowing the remaining fuel, you can roughly calculate how many kilometers you can still drive. However, this can vary greatly depending on driving conditions, driving skills, etc. Based on experience, no matter what car it is, when the fuel gauge light comes on, you can generally drive about thirty kilometers. Suggestions when the fuel gauge light comes on: Reduce braking and avoid driving at low speeds: Braking itself does not consume much fuel, but slowing down and then speeding up again consumes a lot of fuel. Driving at very low speeds is similar to idling. When idling, the vehicle consumes a significant amount of fuel. Turn off the navigation, radio, music, air conditioning, etc. These appliances have high power consumption and can affect the vehicle's fuel efficiency.

9

3

Share

What are the 'Three Slow Aunties' on the road?

Corolla, Levin, and Sylphy are jokingly referred to as the 'Three Slow Aunties' on the road due to their slightly slower speed. Extended information about Corolla, Levin, and Sylphy is as follows: 1. Configuration: None of the three models have rear air conditioning vents. The differences in comfort configurations are mainly reflected in the seats. The driver's seat of the Corolla is manually adjustable, while the Levin and Sylphy feature 6-way electric adjustment. Additionally, except for the Levin, which does not have full leather seats, the other two models come with full genuine leather seats. 2. Interior: The Corolla's interior is primarily beige, while the Levin adopts an all-black interior to emphasize a sporty style. The differences in interior design between these two models are minimal, with variations only in the dashboard and air conditioning panel designs. As for the Sylphy, its interior ambiance is similar to the Corolla, but it features wood-grain plastic trim panels in areas like the gear shift console, giving it a more homely feel.

16

4

Share

What does the EPS light in a vehicle mean?

When the EPS light is illuminated in a car, it indicates a malfunction in the Electric Power Steering system. Here is some information about EPS: 1. EPS stands for Electric-Power-Steering, which is the development direction of automotive steering systems. This system provides steering assistance directly through an electric motor, saving energy and being environmentally friendly. Due to these advantages, EPS, as a new steering technology, is challenging the well-known hydraulic steering system that has been in use for over 50 years. 2. Reasons for the EPS light to illuminate: (1) Possible damage to the steering sensor; (2) Or damage to the steering gear; (3) Or leakage of power steering fluid. 3. A malfunction in the EPS system may result in the car being unable to steer or steering abnormally, in which case it is necessary to go to a 4S shop for inspection and repair. If the EPS power steering system is damaged, it can significantly impact the driver.

15

3

Share

How to Turn on the Fog Lights on a Santana?

To turn on the fog lights on a Santana, you need to first activate the vehicle's lighting system by turning on the position lights. Then, locate the fog light symbol on the lighting control lever and rotate the control ring. Align the front fog light symbol with the activation point, and the dashboard will display the front fog light indicator, indicating that the front fog lights are on. Here is some information about fog lights: 1. Fog lights, generally referring to automotive fog lights, are installed at the front and rear of the vehicle. They are used because visibility is low in foggy conditions, limiting the driver's line of sight. 2. Front fog lights are mounted slightly lower than the headlights at the front of the car and are used to illuminate the road during rainy or foggy weather. Due to reduced visibility in fog, the driver's vision is restricted. Fog lights can increase the visibility distance, especially yellow anti-fog lights, which have strong light penetration. They enhance the visibility for the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance.

14

5

Share

Is the Safety of the New Sylphy Very Low?

How to Use an Automatic Transmission?

What does the exclamation mark on the car steering wheel mean?

How many kilometers can you drive when the car fuel light comes on?

What are the 'Three Slow Aunties' on the road?

What does the EPS light in a vehicle mean?

How to Turn on the Fog Lights on a Santana?

What Causes the Black Screen of Mercedes-Benz Reversing Camera?

What is the optimal adjustment for car rearview mirrors?

How many hours does it take to drive over 100 kilometers?

What Causes the Ford Focus to Have Jerky and Weak Acceleration?