Is the RZ4E Isuzu Engine Imported?

1 Answers
LeEmily
07/29/25 10:25pm
RZ4E Isuzu engine is a domestically produced engine, manufactured by Jiangxi Isuzu Engine Company in China. The RZ4E engine is Isuzu's latest generation diesel engine, with a displacement of 1.898L, a maximum power of 120kW, and a maximum torque of 360Nm. For daily maintenance of the RZ4E engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When engine oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, clogging the filter and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
10
1
Share
More Forum Discussions

What tires does the Elantra use?

The Elantra uses Nexen tires. Nexen Tire has two subsidiaries in China, which are introduced as follows: 1. Qingdao Nexen Tire Co., Ltd., located in Jiangshan Town, Laixi City, Qingdao, Shandong Province, with a total investment of 500 million US dollars. 2. Shanghai Nexen Tire Sales Co., Ltd., established in January 2012 in Shanghai, is fully responsible for the RE and OE sales of Nexen tires in the Chinese market. Here is some additional information: The Elantra continues Hyundai's "Fluidic Sculpture" design concept, with the headlights combined with the smooth hood feature lines, presenting a dynamic and energetic image. The simple and unique side lines combined with the wild rear design create a more three-dimensional effect. The overall design style is developed based on the design concept inspired by natural phenomena like the wind.
6
4
Share

Where is the fuel filler switch located in the Sagitar?

The fuel filler button of the Sagitar is located on the passenger side. Here is more information about the latest Sagitar model: 1. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a curb weight of 1355kg. 2. The 2021 Sagitar features a front MacPherson strut suspension and a rear multi-link independent suspension, with a front-wheel drive layout. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power of 85kW, paired with a 5-speed manual transmission.
12
4
Share

What are the differences between the domestic Model 3 and the imported version?

The differences between the domestic Model 3 and the imported version are: 1. Exterior: The domestic Model 3 closely resembles the Model S, but there are subtle differences in details. The front logo is placed on the hood, making the entire front face completely enclosed. The closed-off grille gives the car a more futuristic and high-tech appearance. 2. Rear design: There is minimal difference between the domestic and imported versions in terms of rear design. The only identifier for the domestic version is the Chinese characters 'Tesla' on the rear. The charging port is integrated with the taillights, ensuring both functionality and aesthetic harmony. 3. Badging: To better highlight its domestic identity, the rear badge uses Chinese characters. 4. Driving mode: The domestic version adds a one-pedal driving mode, allowing acceleration and deceleration to be controlled solely through the power pedal during driving.
12
2
Share

Does the BMW 120 Sport Night Edition Shake?

BMW 120 Sport Night Edition does not shake. Reasons for car shaking: Misfiring is the most common cause of engine shaking. The problem lies with the engine's ignition coil or spark plugs. If the ignition coil is faulty or the spark plugs fail to ignite for some reason, the car will shake. Additionally, unstable oil pressure can easily lead to unstable mixture concentration, which not only causes shaking but also results in unstable idling. Driving with shaking is possible: If the car shakes mildly, you can continue driving, but if the dashboard's warning light is on and the engine sounds abnormal, it is not recommended to keep driving. Slight shaking, which is very smooth and regular without any other abnormalities, is normal and you can continue driving. It can be said that as long as it's a gasoline engine, it will vibrate because machinery vibrates when operating.
4
4
Share

What is the trunk capacity of the Cadillac CT5 in liters?

The trunk capacity of the Cadillac CT5 is 384L. Methods to open the trunk of the Cadillac CT5: 1. Gently press the interior switch button to open the trunk. (Some models have gear adjustment for the trunk switch, rotating from top to bottom for full open, half open, and close respectively) 2. If the button fails, you can also use the key to unlock it directly. Hold down the trunk unlock button on the key, and the trunk will automatically open after a few seconds. 3. If there is no trunk switch inside the car or on the key, the opening method is as follows: ① Press the unlock button to unlock the car doors. ② Walk to the rear of the car, find the trunk switch handle and pull it, at which point the trunk will automatically open. ③ To close, simply shut the tailgate directly.
13
0
Share

Why Does the Steering Wheel Become Misaligned After Changing Tires?

Here are the specific reasons why the steering wheel becomes misaligned after changing tires: 1. Inconsistent Tire Pressure: When the tire pressure is uneven on both sides, it can cause the vehicle to pull to one side while driving, resulting in steering wheel misalignment. 2. Abnormal Wear: Issues like uneven tire wear (e.g., cupping or feathering) can cause the steering wheel to pull to one side. In severe cases, it may even lead to slight steering wheel vibration at high speeds. In such cases, a wheel alignment adjustment is necessary. 3. Suspension System Malfunction: Manufacturers conduct rigorous testing and adjustments on vehicles before they leave the factory. For example, interference between the suspension guide rods and steering linkage can affect vehicle alignment, causing it to pull to one side.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.