Is the RPM not allowed to exceed 2000 in Subject 3?

Can corporate vehicle violations be handled online?

Corporate vehicle violations with penalty points not exceeding six can be handled online. Violations exceeding six points or fines over 200 yuan cannot be processed online and require presenting the administrative penalty notice at a service window. To handle online, open the local official traffic police website, locate the violation processing section, enter the license plate number, verify via SMS, then review the violation records for accuracy. If correct, follow the procedure for processing. Typically, traffic violation fines are collected by designated banks. Log into the mobile banking app of the specified bank, find the traffic violation payment section under municipal services or life payments, enter the penalty decision number from the online processing, and complete the payment.

7

1

Share

Can the car be started in neutral?

Yes, the car can be started in neutral. There is no difference between starting in neutral and starting in P (Park) gear, as the structural principles of P gear and neutral are essentially the same. The only difference is that P gear has an additional set of pawl gear mechanism compared to neutral. Whether in P gear or neutral, the connection between the transmission input shaft and output shaft is cut off, preventing the output shaft from rotating. However, when in P gear, the pawl gear mechanism at the end of the output shaft is also locked. A manual transmission is a gear-shifting device used to alter the speed and torque transmitted from the engine to the driving wheels. It enables the car to achieve different traction forces and speeds under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).

17

2

Share

Should You Engage the Gear or Release the Handbrake First When Starting?

For manual transmission vehicles, the correct operation is to engage the gear first and then release the handbrake. This method helps prevent the vehicle from rolling. For automatic transmission vehicles, it doesn't matter whether you engage the gear before releasing the handbrake or release the handbrake before engaging the gear, as automatic vehicles require the brake pedal to be pressed to start and shift gears. The correct operation for driving an automatic vehicle is to press the brake pedal, then start the engine and engage the gear. Once the gear is engaged, the transmission's power transfer path is connected. Initially, the transmission is in first gear, where the torque is the highest. If the brake is not properly pressed, the vehicle may suddenly lurch forward, potentially causing an accident.

12

4

Share

How deep does a tire cut need to be before replacement is required?

Tires should be replaced when the cut exceeds 6 millimeters in depth. However, it is recommended to replace tires as soon as any cuts are noticed, especially if the cut has penetrated or damaged the internal cord material. Continuing to use such tires poses a risk of blowouts, which can compromise vehicle safety. The sidewall of a tire is its weakest area, lacking the high protective strength of the tread. The cord layers provide structural integrity, and if these are damaged on the sidewall, a blowout may occur. As tire rubber ages, deep grooves may appear on the sidewalls, but as long as the sidewalls haven't been impacted and the cords remain intact, the tires can still be used. The triangular markers on the tire sidewall can help locate a small protrusion within the tread grooves, indicating the tire's actual wear limit, which should be greater than 1.6 millimeters.

9

1

Share

What is Front-Engine Rear-Wheel Drive?

Front-engine rear-wheel drive refers to a traditional drivetrain layout where the engine is positioned at the front and the rear wheels are driven. The advantages of front-engine rear-wheel drive are: 1. Increased load on the driving wheels when starting, accelerating, or climbing on well-paved roads; 2. More balanced axle load distribution, resulting in better handling stability and ride comfort; 3. The engine, clutch, and transmission assemblies are located close to the cabin, simplifying the arrangement of the control mechanisms; 4. The steering mechanism is simple in structure and easy to maintain. The drivetrain configuration refers to the arrangement of the engine and the number and position of the driven wheels. Most conventional vehicles have two rows of wheels, front and rear, with the wheels directly driven by the engine to propel (or pull) the vehicle forward being the driving wheels.

20

4

Share

How to Turn Off Active Noise Cancellation in the 10th Generation Accord?

On the driver's side, above your head is the active noise cancellation feature. Simply remove that small circle to turn off the active noise cancellation function. More information about the active noise cancellation feature is as follows: 1. Introduction: Active noise cancellation is an advanced technology that, during the process of driving the car, processes the noise entering the vehicle by generating a reverse sound wave equal to the external noise through the noise cancellation system, thereby achieving the effect of active noise cancellation and providing a comfortable riding environment for the occupants inside the car. 2. Principle: The principle of the active noise cancellation system is very simple. It mainly measures the waveform of environmental noise entering the recipient's ear and, through calculation, generates a sound wave at the recipient's ear that has the same amplitude but opposite phase, thereby achieving the purpose of noise cancellation.

4

1

Share

Is the RPM not allowed to exceed 2000 in Subject 3?

Can corporate vehicle violations be handled online?

Can the car be started in neutral?

Should You Engage the Gear or Release the Handbrake First When Starting?

How deep does a tire cut need to be before replacement is required?

What is Front-Engine Rear-Wheel Drive?

How to Turn Off Active Noise Cancellation in the 10th Generation Accord?

What engine does the Vios use?

What to Do If Your Driver's License Annual Inspection Has Expired?

How to Lift the Wiper Blades on a Volkswagen Tiguan?

What is the correct way to use a jack?