Is the reversing camera clear on the 2021 Camry?

1 Answers
Oliver
07/29/25 5:48pm
2021 Camry's reversing camera is not clear. Here are some relevant introductions about the Camry: 1. Advantages: The exterior is stylish, the functions are user-friendly, and the steering wheel is equipped with various controls and cruise control buttons. It features electric seats, air conditioning, and good sound effects. The headlight cleaning function is quite practical, and the acceleration performance is excellent. Fuel consumption is not high. 2. Disadvantages: There is significant noise outside the car at idle, the engine vibrates noticeably, and the anti-glare effect of the rearview mirror is poor. The automatic transmission efficiency is relatively low, the rear wheel double-link suspension is relatively weak, the mechanical hydraulic power steering is relatively outdated compared to peers, and the handling is subpar.
Was this review help?
15
3
Share
More Forum Discussions

How to adjust the brakes on the GAC Trumpchi GS4?

The method to adjust the brakes on the GAC Trumpchi GS4 is by adjusting the nut below the pedal. The brake clearance is automatically adjusted and does not require manual adjustment. Braking, also known as stopping, refers to the action of stopping or reducing the speed of running locomotives, vehicles, and other transportation tools or machinery. The principle of braking involves fixing a wheel on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base to generate braking torque under external force. The GAC Trumpchi GS4 is a compact SUV with a length, width, and height of 4545mm, 1856mm, and 1668mm respectively, and a wheelbase of 2680mm.
13
5
Share

What are the reasons for a car air conditioner not cooling properly?

There are several reasons why a car air conditioner may not cool effectively: 1. Excessive refrigerant: Too much refrigerant can reduce cooling efficiency. If the refrigerant and compressor oil contain excessive impurities, minor blockages can occur, leading to insufficient cooling capacity. 2. Insufficient refrigerant: A lack of refrigerant results in inadequate cooling. A dirty condenser or a loose compressor drive belt can also cause the air conditioner to blow warm air. 3. Excessive impurities: If the refrigerant and compressor oil contain too many impurities, minor blockages can form, reducing cooling capacity. If the entire air conditioning system has excessive contaminants in the refrigerant and compressor oil, the filter screen will likely become clogged, decreasing refrigerant flow, increasing resistance, and reducing the amount of refrigerant reaching the expansion valve, thereby causing insufficient cooling.
6
3
Share

How to connect the tachometer signal wire for BYD F0?

To connect the tachometer signal wire for BYD F0, attach the yellow signal wire to the trigger terminal of the ignition switch. The engine fires once every four strokes, which corresponds one-to-one with the RPM. Simply connect it in parallel. The other two wires should be connected to the positive and negative power terminals respectively, with black being positive and green being negative. The BYD F0 is a compact car launched by BYD Company. Its body dimensions are 3460mm in length, 1618mm in width, and 1465mm in height, with a wheelbase of 2340mm. It is equipped with a 1.0L naturally aspirated engine, delivering a maximum power of 50 kW at 6000 RPM and a maximum torque of 90 Nm between 4000 to 4500 RPM. It is paired with a 5-speed manual transmission.
7
2
Share

What are the reasons for the difficulty in starting the Ford Transit diesel vehicle in the morning?

The reasons for the difficulty in starting the Ford Transit diesel vehicle in the morning are: 1. Use of high-viscosity engine oil in winter; 2. Excessive carbon deposits in the intake system and at the root of the intake valve, resulting in an overly lean air-fuel mixture during cold starts; 3. Severe throttle valve contamination, leading to insufficient air intake; 4. Transmission lubricating oil viscosity being too thick, causing excessive engine operating resistance; 5. Insufficient cylinder compression pressure in the engine, among others. Taking the 2020 Ford Transit as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a leaf spring non-independent suspension, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 202 PS, a maximum power of 148.5 kW, a maximum torque of 300 Nm, and matched with a 5-speed manual transmission.
19
1
Share

What Causes the Coolant Reservoir to Overflow When the Car Is Not Overheating?

There are two scenarios where the coolant reservoir overflows without the car overheating: 1. Overflow occurs when aggressively pressing the accelerator: This is mainly due to significant gaps or cracks in the wet cylinder liners or cylinder head. When the engine is running, the pressure of compressed air or combustion gases in the cylinders exceeds the pressure of the coolant in the cooling passages, allowing these combustible gases to enter the engine's cooling passages through the gaps, resulting in the coolant reservoir overflowing. 2. No air in the coolant during engine operation: Whether the coolant temperature is high or low, pressing the accelerator does not cause the coolant to spray out from the radiator filler neck, but releasing the accelerator results in coolant spraying out from the filler neck.
5
1
Share

What problems can a faulty vacuum booster pump cause?

Vacuum booster pump failure can lead to brake dragging, and in severe cases, brake failure. It may also cause heavy steering and abnormal steering noises, with the sound becoming louder at low speeds when turning at larger angles. The primary function of the vacuum booster pump is to assist the driver in increasing braking force and reducing the effort required for braking. Once the booster pump is damaged and loses its assist function, the driver will noticeably feel that much more force is needed for braking, and the original braking force cannot be achieved, resulting in extended braking distances. Fault diagnosis and troubleshooting methods for a faulty vacuum booster pump: 1. Lubricating oil: Check the viscosity of the lubricating oil. If it does not meet the standards, replace it with oil of the appropriate viscosity to ensure proper oil viscosity. 2. Pipes: Inspect all pipes for air leaks. If leaks are found, replace the leaking components. 3. Parts: Check for wear on parts. If wear is detected, repair the worn areas or replace the parts with new ones.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.