Is the renewal date on the driver's license the same as the old one?

2 Answers
NathanLynn
07/28/25 10:20pm
The validity date on the new driver's license is based on the month of the original license's expiration. Below are the specific materials required for driver's license renewal: 1. "Motor Vehicle Driver's License Application Form": Must be signed by the applicant; the original driver's license and the applicant's relevant documents. 2. Proof of identity: If the applicant cannot be present, a jointly signed application form by the applicant and the agent, along with the identity proofs (original and copies) of both the applicant and the agent, must be submitted. 3. Medical certificate: A health condition certificate issued by a county-level or higher medical institution, or a military medical institution at the regimental level or above. For applicants applying for a special small automatic transmission passenger vehicle for the disabled, a health condition certificate issued by a specialized medical institution designated by the provincial health authority must be submitted. 4. Three photos: The photos must be recent (within the last six months), front-facing, full-color, bareheaded, half-length ID photos with a white background, and the applicant should not wear uniforms.
Was this review help?
16
0
Share
LeBennett
08/12/25 2:51am
Last time I renewed my driver's license, I specifically asked the staff - the new license's validity starts from the processing date, not continuing from the old one. When I got the new license, I found its validity was extended by ten years from that date, meaning the old license's expiration became void. This is quite important because some people mistakenly think they can extend from the old expiration date, which may lead to fines for late renewal. I recommend renewing early - bring your ID card and old license, and check your local DMV's requirements to avoid wasted trips. Don't forget to regularly check your license's expiration date while driving - it'll be troublesome if you only realize it after expiration.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

What are the reasons for the high beam of car headlights not working?

Car headlights high beam not working reasons are as follows: Circuit failure: Poor connection or looseness of the wiring, or connectors not being properly seated may cause this type of failure. Headlight lens aging: For some models, prolonged use can cause the headlight lens to age or crack, leading to light failure or insufficient brightness, necessitating headlight replacement. Incorrect headlight system angle: For some models, the high beam angle of the headlight system is incorrect. Refer to the relevant headlight adjustment section in the vehicle's user manual for specific adjustments, which provides detailed instructions. Headlight usage duration: Prolonged use (or quality issues) can cause poor sealing of the headlights, leading to water ingress, foreign objects, or dust accumulation that blocks the light, resulting in weak or insufficient brightness.
5
5
Share

Can Used Cars Meeting China 5 Emission Standards Still Be Licensed?

Used cars meeting China 5 emission standards can be licensed. Definition of China 5: China's fifth-stage motor vehicle pollutant emission standards, abbreviated as China 5 standards, have emission control levels equivalent to Europe's currently implemented Euro 5 emission standards. The European Union has been enforcing these standards since 2009, which impose stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China 1 to China 4 has reduced single-vehicle pollution by 30% to 50%. Differences: Compared to China 4 standards, the new standards reduce nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Based on Shanghai's annual vehicle registration volume of approximately 350,000 units, it is estimated that annual new vehicles can reduce nitrogen oxide emissions by about 1,000 tons per year.
13
2
Share

How Long Does the Subject 3 Test Take?

There is no time limit for the Subject 3 test; candidates only need to complete the required items. The precautions for the Subject 3 test are as follows: Lane Change: When the candidate hears "Please change lanes," they should turn on the turn signal and wait for 3 seconds before turning the steering wheel. If the driver is on a single-lane road, lane change is not permitted at this time. Straight-line Driving: Candidates should try to look as far ahead as possible to maintain a straight path. Once straight-line driving begins, the steering wheel should not be turned arbitrarily, and the solid lane line must not be crossed. Many people fail this section because the test vehicles are used very frequently and are operated by beginners, which may result in the car not driving straight even when the steering wheel is centered. In this case, candidates should focus their vision on the distance ahead and make slight adjustments to the steering wheel to ensure straight-line driving, rather than keeping the steering wheel fixed.
20
0
Share

Where is the cigarette lighter fuse located in the classic Focus?

The cigarette lighter fuse in the classic Focus is located in the center of the glove box on the passenger side. In addition to serving as a cigarette lighter, the car cigarette lighter can also be equipped with a vehicle inverter, which converts the car's 12V, 24V, or 48V DC power into 220V 50Hz AC power for use with ordinary electrical appliances. The vehicle inverter is designed as a split type, with a power limit of 150W for electrical appliances. The dimensions of the classic Focus are 4342mm in length, 1840mm in width, and 1500mm in height, with a wheelbase of 2640mm. The vehicle's top speed is greater than or equal to 195 kilometers per hour. In terms of suspension, the front suspension is MacPherson strut type, and the rear suspension is a fully independent suspension system.
11
3
Share

Why can't the light in the back seat of the Golf be turned off?

The light in the back seat of the Golf cannot be turned off due to several reasons. First, there is an interlock relationship between the front and rear lights. Second, the dome light has a delayed shutdown feature, meaning it takes a moment to respond after an action is taken. Below are the reasons why the rear seat light in the Golf may not turn off: 1. It could be caused by a faulty switch or wiring issues. If the light does not turn off when set to OFF, it indicates a malfunction in the car's rear interior light, possibly due to a damaged switch or wiring problems, requiring inspection and repair at a 4S shop. 2. The rear light might be set to DOOR mode. When lighting is needed in the car, it can be switched to ON mode as needed, and back to DOOR mode when not in use. However, in DOOR mode, it takes about 30 seconds for the light to turn off after the door is closed.
8
4
Share

What Causes a Motorcycle to Stall at High Temperature Idle?

Motorcycle stalling at high temperature idle is due to a fuel system malfunction. Fuel system malfunction: Check if the fuel in the tank is exhausted. If there is sufficient fuel, check whether the fuel switch is turned on. If equipped with a fuel pump, check whether the fuel pump is working properly. Then, disconnect the fuel line to check if there is fuel supply. Unscrew the carburetor drain screw to see if fuel flows out. If no fuel overflows, it indicates that the carburetor fuel passage is blocked and needs to be cleared. Simple troubleshooting method: First, turn the switch to the off position, then remove the fuel line connected to the tank switch. Blow hard into the fuel line with your mouth (or use a pump to blow air). The compressed air impact may clear the blocked fuel passage in the carburetor. If the fuel passage remains blocked, it indicates severe blockage, and the carburetor should be removed for thorough cleaning.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.