Is the rear seat of the Octavia Combi flat when folded down?

1 Answers
LeonardoLynn
07/30/25 3:49am
The rear seat of the Octavia Combi is not flat when folded down. Split-folding rear seat: This refers to the rear seat backrest that can be folded down in a certain ratio. Compared to folding the entire rear seat, the split-folding design offers higher flexibility. You can fold down only half of the backrest to accommodate large items while the remaining part can still be used for seating. The one-piece folding rear seat means the backrest is a single unit. When you need more space for larger objects, you can fold down the entire rear seat backrest to gain additional room. The drawback of the one-piece folding rear seat is that when it is folded down, the rear seat cannot be used for passengers. Method to fold down the rear seat of the Octavia: Step 1: Open the car door. Step 2: Locate the release handle on the upper part of the rear seat. Step 3: Use your right hand to pull the release handle, then push the seat forward with your left hand. At this point, the seat can be laid flat.
Was this review help?
6
0
Share
More Forum Discussions

What to Do When a Vehicle Runs Out of Battery?

Push-start the vehicle. Below are detailed instructions for dealing with a vehicle running out of battery: 1. Signs of a dead battery: The best way to prevent sudden battery failure is to pay attention to the 'distress signals' your vehicle normally emits. There are three main signs of insufficient battery power: first, the starter motor either doesn't turn or turns weakly, making it unable to start the engine; second, the headlights are dimmer than usual; third, the horn sounds weak or doesn't sound at all. 2. Methods to prevent battery drain: To minimize the vehicle's power consumption, avoid leaving lights on for extended periods when the engine is off. Even if the engine is running, if the vehicle is parked for a long time, turn off the power to unnecessary electrical devices (such as interior and exterior lights, audio systems, navigation systems, etc.).
15
3
Share

What Should You Pay Attention to When Driving at Night?

Turn on the lights, and in case of a breakdown at night, promptly place the warning sign. Below are specific instructions on precautions for driving at night: 1. Turn on the lights: Besides illumination, turning on the lights is to make other vehicles notice you. 2. Usage of lights: Do not use high beams when meeting other vehicles. Different lights also have functions beyond illumination; sometimes, you can use headlights to judge the distance between vehicles. If the distance is too close, it may cause reflection. (There are several situations to be cautious about: when passing through intersections, residential areas, or schools where there are many pedestrians and the lighting is not very bright, be sure to slow down, don't rush, safety is the most important.) 3. In case of a breakdown at night, promptly place the warning sign: At night, if your car breaks down on the road, the first step is to turn on the hazard lights and properly place the warning sign. The warning sign must be placed 150 meters behind the vehicle and under the lights to be more visible and safer.
3
4
Share

What precious metals can be extracted from a car's three-way catalytic converter?

Metals include platinum (Pt), rhodium (Rh), and palladium (Pd). The three-way catalytic converter is an exhaust emission filtration device for motor vehicles, which can effectively filter the exhaust gases emitted by the engine, converting them into carbon dioxide and water before discharging them outside the vehicle, thereby reducing atmospheric pollution from exhaust emissions. Relevant information about the three-way catalytic converter is as follows: 1. Introduction: The three-way catalytic converter is the most important external purification device installed in a car's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 2. Working principle: When high-temperature vehicle exhaust passes through the purification device, the purifying agents in the three-way catalytic converter enhance the activity of CO, HC, and NOx gases, promoting certain oxidation-reduction chemical reactions.
15
1
Share

What to Do When the Water Temperature Warning Light Comes On?

Solutions for when the water temperature warning light comes on: 1. The optimal water temperature while driving is around 90 degrees Celsius. Overheating may lead to boiling. Once the water temperature warning light comes on, it is not advisable to continue driving. You should stop the car and wait for the temperature to drop before driving to a service station for inspection and repair. 2. Do not pour cold water onto the engine to cool it down. Instead, wear gloves, place a wet cloth over the radiator cap, loosen the cap slightly to allow steam to escape, and wait for the radiator pressure to decrease before adding cold water or antifreeze. 3. When encountering a high water temperature warning, first reduce speed and pull over to the roadside. Do not rush to turn off the engine immediately, as excessive water temperature can cause overheating of components like pistons, cylinder walls, and the crankshaft, thinning the engine oil and reducing lubrication. If the engine is turned off at this point, the expanding components may lead to soft metal detachment or even cylinder seizure due to the minimal clearance between parts.
6
5
Share

Does starting the car with the air conditioner on have any impact?

Does starting the car with the air conditioner on have any impact? When restarting without turning off the air conditioner, it increases the starting load, which may lead to premature battery failure and also increases wear on the starter. Below are relevant details: 1. Precautions: Before turning off the car, all functional buttons, including the air conditioner, should be turned off. Turning off the air conditioner two minutes before shutting down the engine allows the cold air in the pipes to be discharged in time, preventing mold and bacterial growth in the pipes. The air blown out by the air conditioner is directly breathed by the occupants inside the car, and bacterial growth can cause certain harm to their health. Therefore, it is advisable to turn off the air conditioner before shutting down the engine. 2. Composition of the air conditioner: The car air conditioning system consists of an air conditioning compressor, high-pressure pipes, a condenser, a dryer, high-pressure pipes, an expansion valve, an evaporator, and low-pressure pipes.
15
2
Share

How Much Fuel Should a Car Take?

Generally, a car should be filled to 80% of the fuel tank capacity. Here are some precautions for refueling: 1. Choose to refuel when the temperature is relatively low. 2. If the car is not used for a long time or used infrequently, keep a small amount of fuel. 3. Do not refuel when a tanker truck is unloading fuel. 4. Turn off the engine when refueling a gasoline car. 5. Do not mix gasoline of different grades. The components of a fuel tank are as follows: Fuel tank cap, partition, fuel gauge sensor, fuel inlet and return pipes, filler neck, vent. Here are the functions of the fuel tank cap: 1. Record the car model and the type of fuel. 2. The standard tire pressure range and precautions.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.