Is the Rear Seat of the Mercedes-Benz GLB Flat When Folded Down?

1 Answers
MaverickRose
07/25/25 6:25am
The rear seat of the Mercedes-Benz GLB is flat when folded down. The rear seats can be folded down using a pull strap. The Mercedes-Benz GLB features five adjustment functions for seat position, lumbar support, leg rest, headrest height, and backrest. The Mercedes-Benz GLB is a compact SUV with body dimensions of 4638mm in length, 1834mm in width, and 1687mm in height, and a wheelbase of 2829mm. In terms of power, the Mercedes-Benz GLB is equipped with a 1.3-liter turbocharged four-cylinder engine, delivering 163 horsepower and a maximum torque of 250 Nm. This engine is paired with a 7-speed dual-clutch transmission.
Was this review help?
1
3
Share
More Forum Discussions

What does the warning light with an exclamation mark inside a triangle indicate?

An exclamation mark inside a triangle represents a general warning light. Below are some related details: 1. Possible causes for this warning light to illuminate: Overheating of the dry dual-clutch transmission clutch; Fuel cutoff system intervention or malfunction; Sensor failure; Exterior light bulb malfunction; Engine oil pressure sensor failure; Traction control system warning or malfunction. 2. Symptoms of the fault: When starting the vehicle, all warning lights will illuminate as the system performs an automatic self-check. They should turn off after the check is completed. If a light fails to illuminate when the ignition is turned on, remains lit continuously, or lights up while driving, it indicates a malfunction in the corresponding system.
18
1
Share

Can you blow hot air on a freshly tinted windshield?

You can blow hot air on a freshly tinted windshield. Good privacy: Generally, car window films are one-way, which can protect the owner's privacy, but the owner needs to verify when choosing the car window film. Has anti-explosion effect: In case of an accident, the glass with car window film can stick together after breaking, avoiding the phenomenon of glass splashing, which is a protection for the passengers. Heat insulation: High-quality car window films can provide heat insulation when in use. In summer, they can effectively control the rise of temperature inside the car, and in winter, they can suppress the dissipation of heat inside the car, maintaining the temperature inside the car and creating a comfortable driving environment for the owner.
1
0
Share

Is Detailing and Waxing Harmful to Car Paint?

Detailing and waxing are not harmful to car paint. Here are the benefits of detailing and waxing: 1. Beautification: Car waxing can give the vehicle a more attractive shine, drawing more attention. 2. Waterproofing: Car waxing also provides waterproofing, preventing rainwater from corroding the vehicle, especially since urban rainwater today is highly acidic and extremely corrosive, making regular waxing essential. 3. Heat Protection: In the scorching summer, waxing can reflect incident light to some extent, providing a protective layer for the car body, avoiding direct exposure to the paint, thus preventing fading and wear. 4. Anti-static: During driving, friction between the car's metal body and airborne dust can generate static electricity. To prevent this static buildup, the car body should be waxed.
6
4
Share

How to turn off the TCS indicator light?

When the TCS indicator light is on, you can turn it off using the following methods: 1. When the vehicle is stationary, if the TCS indicator light stays on, it means the system has been manually deactivated. If it lights up during driving, it indicates wheel slippage and that the TCS system is actively working - this is normal operation and doesn't require repair. To deactivate, simply press the TCS off button, but be sure to perform this operation carefully. 2. If neither of the above situations applies, you may need to visit a 4S shop for inspection. It could be caused by a damaged ABS sensor. After repair, clearing the fault code will turn off the light.
15
4
Share

Is it necessary to install a fender on a motorcycle?

Whether it is necessary to install a fender on a motorcycle depends on the actual situation. If the rear fender of the motorcycle is short and small, providing poor mud protection, and you frequently ride on muddy roads, then installing a fender is advisable. Otherwise, it is unnecessary. Definition: A fender is a plate-like structure installed behind the outer frame of the wheel, usually made of high-quality rubber or engineering plastic. Fenders are typically metal, leather, plastic, or rubber panels installed behind the wheels of bicycles or motor vehicles. Function: The main purpose is to prevent mud from splashing onto the vehicle body or the rider, which can make the vehicle or rider look unattractive. It also helps prevent mud from splashing onto the tie rods or ball joints, which can cause premature rusting.
11
4
Share

Why was the Cadillac XTS discontinued?

Cadillac XTS was officially discontinued in Canada in October 2019. It was originally the best-selling model in North America. However, as almost all competing models adopted rear-wheel-drive FR platforms, the sales of XTS gradually declined, leading to its discontinuation. Here is some relevant information about Cadillac XTS: 1. Cadillac XTS is a full-size luxury sedan that debuted as a hybrid at the 2012 Beijing Auto Show. It has a body length of 5131mm, a wheelbase of 2837mm, and comes with 20-inch 11-spoke wheels and Bridgestone tires. 2. The powertrain configuration includes a 2.0T turbocharged engine with a maximum horsepower of 269, while the high-end 3.6L V6 engine can reach up to 309 horsepower. The car offers five body colors to choose from.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.