Is the rear light the same as the low beam?

2 Answers
Hadley
07/25/25 9:19pm
No. The low beam is a type of headlight. Headlights refer to the vehicle's high beam, low beam, and turn signals. Introduction to headlights: Headlights are lighting devices installed on both sides of the front of a car, used for illuminating the road during nighttime driving. They can be categorized into two-lamp and four-lamp systems. Definition of headlights: Regarding the definition of headlights, they refer to lighting devices installed on both sides of the front of a car, used for illuminating the road during nighttime driving. From this statement, it can be understood that the low beam falls within the category of headlights, but headlights are definitely not limited to just the low beam. By definition, both low beams and high beams are considered headlights.
Was this review help?
5
0
Share
AllisonDella
08/11/25 10:14pm
Rear lights and low beams are completely different things. I've been driving for ten years, and at first, I couldn't tell the names of these lights apart. Rear lights are the set of lights at the back of the car, including brake lights, reverse lights, etc., mainly to let the cars behind see you clearly. For example, the red light that comes on when you brake at night is a typical rear light. Low beams, on the other hand, are part of the headlight assembly at the front of the car, used at night to illuminate the road nearby without dazzling oncoming drivers. Once, my friend said "turn on the low beams to light up the rear of the car," which was quite a joke—these two types of lights have different positions and functions. It's especially important to check your rear lights regularly when using your car daily; if the reverse light is broken, it can be very dangerous in parking lots.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

How to Completely Disassemble a Mercedes Key?

Method to completely disassemble a Mercedes key: 1. Press the black button to the other side and pull out the mechanical key; 2. Insert the mechanical key into the small groove to act as a screwdriver, then pry forcefully to open the key. Functions of the Mercedes key: 1. One-touch door opening, door locking, and starting the car by inserting the key; 2. Long-press the lock button to raise all windows and lock the car; 3. Long-press the unlock button to lower all four windows and open the door; 4. Press the trunk button once to unlock the trunk, long-press to automatically pop it open; 5. There is a small black tab on the back of the key; slide it to pop out the metal physical key, which can be inserted into the car door's lock to open the door.
5
5
Share

What transmission does the Volkswagen Touran use?

Volkswagen Touran uses a 5-speed manual transmission and a 7-speed dual-clutch transmission. The vehicle is equipped with a 1.4T turbocharged engine, with a maximum torque of 220 Nm, a maximum horsepower of 131, and a maximum power of 96 kW. The transmission is an mechanism used to change the speed and torque from the engine, which can fix or change the transmission ratio between the output shaft and the input shaft in stages. The Volkswagen Touran is a 5-door, 5-seat MPV, with body dimensions of 4395 mm in length, 1794 mm in width, and 1634 mm in height, and a wheelbase of 2678 mm. The Volkswagen Touran has a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a four-link independent rear suspension, and a unibody structure.
3
3
Share

How to Set Up One-Touch Power Windows for the Envision?

The front windows of the Envision feature one-touch up/down functionality, which requires no additional setup. Simply press or pull the switch briefly to fully lower or raise the windows. Below is more information about power window operation: 1. One-touch power windows refer to a system that allows window glass to be fully opened or closed with a single button press. Vehicles equipped with this feature have two-stage window switches: the first stage operates like a conventional power window, while the second stage (a deeper press) triggers automatic full opening/closing when released. 2. This design primarily enhances convenience for occupants and prevents drivers from being distracted by prolonged window operation, thereby improving safety. 3. The system includes anti-pinch protection to prevent potential injury from closing windows.
8
5
Share

What to Do When the Cadillac Trunk Won't Open?

Solutions for when the Cadillac trunk won't open: 1. Use the central control to open; 2. Use the key to open; 3. Touch the rear to open. If the Cadillac trunk won't open, it might be a software issue, and you should visit a 4S shop to reprogram it. Alternatively, check if water has entered the trunk, as water can corrode the trunk lift control module and lift motor. The Cadillac SRX has body dimensions of 4851 mm in length, 1910 mm in width, and 1663 mm in height, with a wheelbase of 2807 mm. The Cadillac SRX features front-wheel drive, with a front suspension type of MacPherson strut independent suspension plus a stabilizer bar, and a rear suspension type of multi-link independent suspension plus a stabilizer bar.
10
5
Share

Why does the car make a creaking sound when going over speed bumps when cold?

Cold car makes a creaking sound when going over speed bumps because the car's shock absorption system has malfunctioned and needs timely repair, otherwise it will affect the normal use of the car. It should be noted that it is very likely caused by the shock absorber itself leaking oil or bending, etc. This type of component cannot be directly repaired. If there is a problem, it can be directly replaced. The shock absorption springs on the car are very prone to aging during use, with the main manifestation being spring deformation. Spring deformation cannot be repaired, and it is recommended to replace it directly, otherwise it will affect the comfort of the car. When the car is driving at low speed on roads with poor conditions, the chassis of the car will produce vibration sounds, and there will be a noticeable feeling on the steering wheel of the front shock absorber. Sometimes the chassis may also feel too stiff, which indicates that there is a problem with the car's shock absorber.
8
3
Share

Should Car Air Conditioning Refrigerant Be Added from the Low or High Pressure Side?

Car air conditioning refrigerant should be added from the low pressure side because the system is vacuumed, and the high pressure side is only suitable for adding refrigerant as it retains an interface. The method of addition depends on the substance being added. Here are more details about adding refrigerant from the low pressure side: 1. First, connect the manifold pressure gauge to the compressor and the refrigerant canister. After opening the canister, loosen the nut on the middle injection tube of the pressure gauge. When you hear the sound of refrigerant vapor flowing, tighten the nut. 2. Next, open the low pressure manual valve, allowing the refrigerant to enter the refrigeration system. When the system pressure reaches the specified value, close the low pressure manual valve. 3. Finally, start the engine and turn on the car air conditioning to allow the refrigerant to enter the refrigeration system, and then test the cooling effect.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.