···
Log in / Register

Is the Rear-End Collision Always the Full Responsibility?

4 Answers
StJesse
09/08/25 4:24am

Rear-end collision is not necessarily full responsibility, there may be the following situations: Uncontrolled reversing by the front vehicle: This situation often occurs at traffic light intersections. The front vehicle starts moving when the light turns green, but sometimes rolls back uncontrollably, hitting the vehicle behind. For the rear vehicle, this is a rear-end collision, but the responsibility lies with the front vehicle, and the rear vehicle is not at fault. Rear-end collision caused by the front vehicle forcing a lane change: If you are driving normally and the front vehicle suddenly forces a lane change, causing a rear-end collision, the responsibility also lies with the front vehicle. You just need to explain the situation to the traffic police and provide your dashcam footage as evidence, then the front vehicle will be held responsible.

Was this review help?
11
0
Share
VonAdam
09/20/25 3:08am

As a veteran driver with over a decade of experience, I believe rear-end collisions are indeed mostly the fault of the following vehicle, since traffic regulations emphasize maintaining sufficient safe distance. I've witnessed many cases where, for instance, on rainy days with slippery roads, the rear vehicle failed to brake in time and collided with the car ahead. Police investigations often directly assign full responsibility to the following vehicle, citing failure to maintain a reasonable gap. However, there are exceptions. If the leading vehicle suddenly reverses or performs an emergency stop with malfunctioning brake lights, liability might be shared. I usually recommend regular checks of your vehicle's lighting functions and staying alert to weather changes while driving. These practices can effectively prevent such troubles and ensure safer, worry-free journeys.

Was this review help?
11
5
Share
Expand All
Alyssa
11/03/25 3:29am

When I first got my driver's license, I often worried about what would happen in a rear-end collision. After researching extensively, I learned that usually the rear vehicle bears full responsibility because it failed to maintain proper distance. However, the rules aren't rigid - if the front vehicle changes lanes abruptly without reason or causes an accident due to malfunction, liability can be adjusted. This taught me to always maintain at least a two-second following distance while driving, especially during traffic jams when it's easy to get impatient. After developing these good habits, I feel much safer on the road.

Was this review help?
16
3
Share
Expand All
LaHarmony
12/17/25 3:29am

Safety always comes first. Rear-end collisions are generally the responsibility of the following vehicle, as it must ensure it can stop in time. However, don't overlook exceptional circumstances, such as the leading vehicle suddenly stalling or driving under the influence, as these can affect liability allocation. Prevention is key—I recommend staying alert while driving and utilizing distance warning systems. These small measures can significantly reduce risks.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

Where is the cigarette lighter fuse located in the Envision?

The cigarette lighter fuse in the Envision is located in the fuse box on the passenger side. You need to open the passenger side fuse box to find the corresponding fuse number for replacement. In the Envision, there are three fuse boxes in total: one in the cabin, one in the trunk, and another near the passenger seat. The cigarette lighter fuse is located in the fuse box near the passenger seat. On the fuse box cover, each fuse is labeled with its number and corresponding function. Owners simply need to check the cover to find the cigarette lighter fuse number and then locate the corresponding fuse inside the box. As a global next-generation strategic model for General Motors, the Envision's exterior design inherits the essence of the ENVISION concept car.
19
3
Share

How to Repair Scratches on Car Wheel Hubs?

Steps to repair scratches on car wheel hubs: 1. Clean the wheel hub to facilitate inspection of all scratches, scratch depth, and whether the hub is cracked. If the hub surface has cracks, deformation, or is completely broken, it cannot be repaired. Only hubs that are not broken or deformed can be repaired; 2. After cleaning, use degreasing wax paper to wipe the hub clean; 3. After smoothing the putty, repaint the hub. Spray the hub spray onto the applied putty, gently spraying back and forth a few times to complete the entire process of repairing the scratched hub; 4. The scratched areas of the hub are usually rough, so use fine sandpaper to smooth them out.
14
4
Share

Why does the Volkswagen mechatronic unit fail?

Because the transmission mechatronic unit has high requirements for shifting and maintenance, if the lubrication level of the transmission fluid fails to meet the standard, the transmission will suffer from prolonged insufficient lubrication. This accelerates wear and tear on the transmission, leading to mechatronic unit failure and shortening the transmission's service life. Symptoms of a faulty transmission mechatronic unit include: 1. Illumination of the gear position indicator on the car dashboard. 2. Vehicle shaking, inability to upshift, loss of odd-numbered gears or even-numbered gears, and in severe cases, the vehicle may become inoperable. 3. Appearance of fault codes indicating failure to engage gears, or accidental opening/closing of the clutch.
15
0
Share

Should the Avancier 240 use 92 or 95 octane fuel?

The Avancier 240 Turbo model uses 92 octane fuel. The Avancier is a mid-size SUV under Honda, with dimensions of 4858mm in length, 1942mm in width, and 1670mm in height, and a wheelbase of 2820mm. The Avancier is equipped with two engines: a 1.5L naturally aspirated engine and a 2.0L naturally aspirated engine. The 1.5L naturally aspirated engine delivers a maximum power of 142 kW and a maximum torque of 243 Nm, with the maximum power achieved at 5600 rpm and the maximum torque available between 2000 to 5000 rpm. This engine features VTEC technology and direct fuel injection, and utilizes an aluminum alloy cylinder head and block, paired with a CVT transmission.
5
1
Share

What Causes a Slight Vibration in the Brake Pedal?

Brake pedal experiencing a slight vibration is mainly due to the following reasons: 1. Uneven tread wear on both sides of the tires or different tire pressures. 2. Deformation of the brake disc. 3. Loose screws on the underbody shield. Automobile brake pedal operations are divided into: slow braking (i.e., anticipatory braking), emergency braking, combined braking, and intermittent braking. Generally, during slow braking and emergency braking, before the wheels lock up and the vehicle comes to a stop, the clutch pedal should be fully depressed to prevent the engine from stalling and to facilitate speed adjustment.
10
5
Share

Where to Apply for ETC for Multiple Vehicles Under One Name?

If you have multiple vehicles under your name, you can bring your ID card to a bank to sign up for ETC service. After completing the application, you can directly install and activate the device. Alternatively, you can take the bank agreement to an ETC service outlet for installation and activation. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display "Tag Invalid, Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then peel off the protective film on the OBU adhesive and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield. The chip should be inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-efficient: Saves money by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.