Is the RAV4's engine imported?

1 Answers
LeNoah
07/29/25 4:59pm
The RAV4's engine is not imported, it is domestically produced. The RAV4 is equipped with a 2.0L and 2.5L naturally aspirated engine with the model code M20DFKS. The main components of the 2.0L engine are made of aluminum alloy, reducing the engine's weight. The 2.5L engine features dual VVTi and ACIS harmonic supercharging intake system, enhancing engine power and ensuring more complete fuel combustion. The RAV4 is a compact multi-purpose off-road vehicle in Toyota's lineup, with dimensions of 4265mm in length, 1785mm in width, and 1705mm in height, and a wheelbase of 2660mm. The RAV4 comes standard with safety features such as VSC vehicle stability control, 6 airbags, TRC traction control system, HAC hill-start assist control, and automatic limited-slip differential.
Was this review help?
14
5
Share
More Forum Discussions

Can the Subject 2 Appointment Be Cancelled After Successful Booking?

Subject 2 appointment can be cancelled after successful booking. There are mainly three cancellation methods: 1. If booked via mobile app, cancel the appointment in the 'Exam Appointment' section. 2. If booked through the DMV website, use the driving test subject online booking system to cancel. 3. If cancellation isn't possible via mobile or computer, visit the local DMV with your ID card to cancel. Additional information: 1. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment, referring to the field driving skill test. 2. The C-license test includes five mandatory items: reversing into a garage, parallel parking, hill start and stop, right-angle turn, and curve driving.
15
0
Share

What is the model of the Buick Envision fog light bulb?

The model of the Buick Envision fog light bulb is H3. Below is relevant information about fog lights: 1. The power of the Buick Envision fog light is 55W. Car fog lights are installed at the front and rear of the vehicle, primarily used for road illumination and safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. 2. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically bright yellow, while rear fog lights are red. The symbol for the rear fog light differs slightly from that of the front fog light—the front fog light symbol has downward light lines, whereas the rear fog light symbol has parallel lines, usually located on the vehicle's dashboard. Due to their high brightness and strong penetration, fog lights do not scatter light due to fog, making their correct use effective in preventing accidents. In foggy conditions, both front and rear fog lights are usually used together. 3. According to traffic regulations, when visibility is between 100–200 meters, fog lights, low beams, width indicator lights, and tail lights must be turned on, with speed not exceeding 60 km/h and maintaining a distance of more than 100 meters from the vehicle ahead. When visibility is between 50–100 meters, fog lights, low beams, width indicator lights, and tail lights should be turned on, with speed not exceeding 40 km/h and maintaining a distance of more than 50 meters from the vehicle ahead. In good visibility conditions, the use of fog lights is strictly prohibited because the red light from fog lights, unobstructed by fog, rain, or snow, can directly harm human eyes when shone into them.
12
2
Share

How to Drive on Snow and Ice Roads

Driving on snow and ice roads requires the following methods: 1. When starting, the clutch should be half-engaged, and the accelerator should be gently pressed to allow the engine to output minimal power without stalling, adapting to the snowy and icy road surface to improve traction. Use predictive braking and rely on the engine's drag effect to decelerate as much as possible. Use the handbrake more often and the footbrake less to avoid emergency braking. 2. When turning, always reduce speed to the maximum extent in advance, stabilize the steering wheel, and turn slowly and return slowly. Without affecting oncoming traffic, try to increase the turning radius to reduce centrifugal force during the turn. Remember not to turn quickly or sharply to prevent side slipping and skidding. Avoid overtaking whenever possible. When meeting another vehicle, choose a flat and wide section of the road and maintain sufficient lateral safety distance between the two vehicles. If it is snowing while driving, reduce speed and use the windshield wiper to improve visibility.
8
3
Share

How to Start the Car When the Smart Key for One-Button Start Runs Out of Battery?

When the battery of the smart key for one-button start is depleted, the methods to start the car are: 1. Vehicles with one-button start usually have a slot for the smart key. When the smart key runs out of power, insert it into this slot, wait a moment for the vehicle to detect the key, and then start the engine; 2. Locate the mechanical keyhole and insert the key blade from the remote key, then start the car as you would with a conventional vehicle; 3. Place the remote key against the one-button start button, wait briefly for the vehicle to sense the key, and then start the car; 4. Simply replace the battery. The one-button start system is a component of smart cars, designed to simplify the starting process with a single button that can also turn off the engine. This system can be installed in place of the original key ignition or as an independent panel modification.
10
3
Share

What to Do If a Car Burns Engine Oil?

Solution for a car burning engine oil: It is necessary to remove the engine cylinder head and replace the valve stem seals. The main functions of engine oil are: 1. Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. 2. Cleaning: Good engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, and flush away dirt generated on the working surfaces of parts through the flow of the lubricating oil. 3. Sealing and leak prevention: Engine oil can form a sealing ring between the piston rings and the piston, reducing gas leakage and preventing external contaminants from entering.
5
1
Share

Can You Get a Driver's License if One Eye Is Blind?

You can get a driver's license if one eye is blind. However, according to the vision requirements for applying for a driver's license: if you have monocular vision impairment, you can apply for a motor vehicle driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or small automatic transmission passenger cars specially designed for the disabled, provided that the visual acuity of the better eye (either naked or corrected) reaches 5.0 or above on the logarithmic visual acuity chart, and the horizontal field of vision reaches 150 degrees. Additional information: 1. To apply for large passenger cars, tractors, city buses, medium-sized passenger cars, large trucks, trolleybuses, or tramcars, the naked or corrected visual acuity of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. 2. To apply for other types of driver's licenses, the naked or corrected visual acuity of both eyes must reach 4.9 or above on the logarithmic visual acuity chart.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.